I have a rectangle and I need to drag the bottom corners up, leaving the centre section in place to create a curve along the bottom edge.
What I don't want is to create a mask to hide the bottom corners, as I need the image on the left and right edges to compress as I drag it up.
There are many ways to skin this particular cat. This is the way that I do it.
View 9 Replies View RelatedI'm having the hardest time creating a marquee style image in illustator.. (something like this:
[URL]....
So far i've been able to make the rectangle witht he curved angles, but can't seem to get the circles inside of the marquee..
Any tutorial or a quick guide that can create one?
I have a curved shape which is a light color. I want to create a dark outline and have it fade into the light color as a gradient would, uniformly following the curved shape.
Photoshop elements 8
Using PS7 and the round edge rectangle tool...is there an easy way to save the "selection" as a round edge image?
is there a way to place the rounded corner selection onto a transparent canvas ?
I do not have the time or skills to attempt this without the round edge tool.
In Autodesk Inventor 2013. I have a simple cylinder extrusion with a rectangle attached to the cylinder. Drawing file attached(extrusion 1). Whenever I apply a chamfer to one of the straight edges, Inventor generates negative taper on the cylinder wall (if you zoom in with a window, you can clearly see that their are two lines on the cylinder wall where the chamfer edges was applied).
Is there anyway to prevent this from happening? This gives me all sorts of problem in my CAM software because the tool is trying to machine in an area it cannot get to.
As a work around I have to create a new part file with a small gap between the cylinder and the chamfered edges. This keeps the cylinder edges nice and straight with no taper. The work around is attached as well. Since the tool can't go that far into the corner given the radius of the tool, the gap has no affect on me generating code. I have tried many different ways on creating this part with chamfers with no luck. Once the chamfer is generated, it should match the profile of the cylinder.
I am attempting to re-create a product my company sells and I've got everything finished but two things - rounding the four corners of my rectangle and getting my 2D text to render in my view port. I've already converted to an editable poly but I can't seem to pick the right options - I know the edge or vertices need to be chamfered.
View 9 Replies View RelatedI'm trying to make two pads share a curved edge but they just dont seem to be able to do so. I have to leave a gap between the two pads. If i snap the edge together, while the computer regenerates an error pops up saying pads can share edges but cannot overlap. Whats the deal yo?
View 5 Replies View Relatedhow I would combine the curved line with the base line of the green rectangle so that it actually replaces the bottom line?
View 4 Replies View RelatedIs it possible to create a work point on the midpoint of the curved edge of any feature.
I was not able to access the midpoint of an edge.
Config :: Intel (R) Xeon (R) CPU E31245 @ 3.30 GHz, 16.0 GB, 64bit win7
Inventor 2013 and Vault Basic 2013
I draw a rectangle. I want that rectangle to be longer, so I drag one side. Why does the other side move a little? I can't think of an instance where this would be useful behavior.
Here's the rectangle:
Here is what it does when I drag:
Notice the outline preview of how big the rectangle will be. On the left side, It has moved considerably from it's original position. Why? Why on earth would I ever want that and is there a way to make it stop?
I have created a rectangle object with top right and bottom left corners set to 90px. I have an image that goes inside the box in the bottom left corner. The problem is I need the box to act as if it is using "Overflow Hidden" so I can position the image in the corner and have it partially "cut off" to fit the corner but It doesn't seem to be working when I set the overflow to hidden on the rectangle.
Also (part of my previous post earlier), is there a way to add/change the CSS code generated by Edge without messing anything up?I can write this in CSS and add it if I knew where and how (although I'd rather do it within the Edge interface).
I made an animation with adobe edge which I used in adobe dps. There is a button with touchstart (starts the animation) and touchend (play animation reverse). It works really well, but when I have the finger on the button it shows this gray copy-rectangle (the one with the blue little dots). The people at the adobe dps forum said it has to do something with adobe edge...
View 3 Replies View RelatedI have 4 layers (background, layer1, layer2, layer3-text). They fill all 300 x 600 pixels that comprise the .psd/future image. What I want to do is use a rounded rectangle to encompass all of the other layers, so that the surrounding pixels (around the rounded rectangle) are transparent.
I want all of my current layers to be the content of a rounded rectangle.
How to create a flow arrow label for a feature line that parallels the curve?
I've a vague notion that this could be done with a dynamic block and a few fancy expressions. I'm comfortable with expressions, but I've never used dynamic blocks at all, so I wouldn't know where to start.
To be clear, I know curved text is possible, but I'm looking for a curved line (ie an arc) that would look 'parallel' to the arc of the feature line (ie have the same centre point). This would have to be dynamic to allow for different radii and for flipping to the left and right side of the feature line.
Having a time getting ribs to align 2m below top of ridge beam, and connect to curved wall below. I created one, then arrayed, but the radius changes at each 2.5 degree interval. I don't think I should have to calculate the % radius change to get the beams to do this. Some constraint button maybe?
Not sure if editing a wall profile is the best way to model this, but it's working.
I want to extrude a big number of pillars to a rather complicated surface and that works out fine. But each end of the pillars warps around the surface and I want them just to go up to it and stop with a resulting horizontal face.
View 1 Replies View RelatedI saw that the Rounded Rectangle properties were not available on the regular rectangle (to change corner radius).
View 5 Replies View RelatedAny quick tips to convert an expanded appearance rounded rectacngle back to a sharp cornered rectangle?
View 6 Replies View RelatedI am currently working in a facade that has a stylized gondola on it. The gondola has curved walls for the sides, and I need to have the curved cut to give it the shape. The tools I know are for straight walls, not curved. and the Opening/wall makes a squared opening, not curved.
View 3 Replies View RelatedI'm having trouble getting the edges of my eyes to look like they are part of the chair, which got me wondering. Is there a way to feather my edges with increased intensity closer to the edge? To be specific, I'd like to start the feather 100px inside the border with 60% opacity, all the way to the edge (border) with 0% opacity. I tried doing this manually a couple of ways and it just didn't look uniform.
I have also tried with the eyes seperated (without the middle area), but I still have the same issues.
When I go to crop or move an image close to the edge of the canvas it jumps to the edge. I am having trouble especially with cropping the space between the image and the edge of the canvas the way I want it. turning off this jumping to edge problem I'm having?
Also, I've used CS4 a fair bit and haven't come across this same problem but in PE when I'm editing things like adjusting text on a layer and I'm changing options with hotkeys to resize the text box for eg, Elements seems to jump to the background layer quite alot and then I have to click back on the layer I want to edit between changing tools. Is it something to do with the Esc key?
How do I fade the edges of a photograph into the background so there is no hard line? Once I did it by spraying the background color over the photo outline, but I know there is a better/easier way. What standard filters apply only to edges? I frequently want to do a torn edge, wavy edge, etc.
View 7 Replies View RelatedI am doing a gold medallian to put on an award and need to create the toothed edge aroung the circle. I know I make the circle selection and inverte it before doing a quick mask. But I can't figure out what filter and settings to use to make a toothed edge around the outside.
View 9 Replies View RelatedI have an existing HTML page (created in Adobe Muse) and I am trying to draw some Adobe Edge objects on top of the page (e.g. a rectangle or an image). When I look in the layers panel, the Edge objects show as top in the list. However, visually when I look at the page, the elements show behind the pre-existing HTML page from Muse.
View 3 Replies View RelatedUsing Autocad 2000LT and trying to locate as many 1.5" diameter circles as I can within a 21" diameter circle keeping all the circle .500" apart from any other circle and .500" away from the outer edge. Am using the array function. Trying to bring the first circle up to the line thats .500" in from the 21" outside diameter.
First when I zoom the 1.5" circle looks like a series of lines, not a smooth round circle. First how do I smooth out the appearance of the circle. Second, what commands do I use to move the edge of the circle to just tough the line so that when I measure from the outside dia to the far edge of the small circle I get 2".
In version 5.2 for Mac i'm seeing Export -> Long Edge / Short Edge giving the wrong result... they seem to be inversed... I.e. defining a long edge seems to result in an exported image with that length as the short edge.
View 1 Replies View RelatedThe Elements window in Edge Animate seems to be unstable. When I right-click in the field to modify an asset, Edge often crashes with the resulting error message:
Edge Animate - Exception An error occurred. Please save your work and restart Edge Animate.
It happens quite frequently (~7/10 right-clicks)
Is there a way for me to know what all features of HTML5 does my Edge project actually use.
I know there are a lot of sites which tests what all HTML5 features are supported by a browser, but I want to know which all features are being used by a edge project.
I've placed the OAM file of my Edge animation and gone through the steps of creating a "folio", but when I preview in Adobe Content Viewer all I get is a static page that fades out when clicked.
View 2 Replies View RelatedI have come across about a dozen similar discussions, but most have presented solutions that worked in earlier versions of Edge and no longer work.
I am trying to use Edge to build animations that can then be integrated into larger non-Edge projects. I would like to then be able to control the Edge timeline or Edge symbols from elements OUTSIDE of Edge, such as another link or button in the page.
I cannot seem to figure out how to properly reference the Edge stage or symbols.
I have come across several proposed solutions for referencing Edge stage, such as:
var comp = AdobeEdge.getComposition("EDGE-966604542");
var stage = comp.getStage();
var comp = $.Edge.getComposition("EDGE-966604542");
var stage = comp.getStage();
var comp = Edge.getComposition("EDGE-966604542");
var stage = comp.getStage();
and these either DO NOTHING or throw errors about either AdobeEdge or Edge or comp being undefined.