Photoshop :: Curve Stroke
Mar 17, 2003
i have a question concerning the stroking of paths.
I want to create a brush that is a line of e.g. 5 pixels in height, and 30 in lenght.
I want to draw a path and stroke it with my custom brush. However i want to have space between the brush strokes.
That is do-able with the spacing options in the photoshop 7 brush palette right ?
When i have the brush (like the url above) i would like the brush to follow the path i've drawn.
Is this possible ? for my brush to adapt itself to my curve?
View 3 Replies
ADVERTISEMENT
Jan 1, 2014
I applied a 1pt stroke as you see in the screenshot and I gave it a default width profile. For some odd reason no matter what I do that stroke has sharp edges and isn't curved smoothly.
View 5 Replies
View Related
Sep 12, 2013
Is there a way or an option I am missing to convert my regular paths to a path stroked with a brush profile,while maintining the proper stroke width?
Â
For instance, I have a regular line with a stroke of 5 and then add a brush profile, which then converts the original stroke to whatever the brush was made at.
View 1 Replies
View Related
Feb 19, 2013
I want to draw hyperbola curve whose equation is  x^2/a^2 - y^2/b^2=1. May I use equation curve tool to make the above hyperbola.Â
I have also made a hyperbola curve of aforesaid equation through conventional method on mathematical ground in the past.
View 2 Replies
View Related
Dec 31, 2013
I have ran an analysis and SSA gave me Error 607  on the report. It says "Inlet A9 gutter capture curve is not a valid curve."
A couple things I did different from the video lectures...
IÂ selected user define for the Tc to figure out Q. i computed those manually.
For the Inlets I have selected Maximum Capture Cutoff.
There are some inlets in this model I created that do not capture 100% of the flow so i created conveyance links to account for the bypass flow.Not sure why is not recognizing the Curve?
View 9 Replies
View Related
Mar 21, 2012
Why in LR4 is the Tone Curve default set to Custom with a contrast lowering curve? I would like the default to be linear, but I can't remember how I set that up in LR3.
View 5 Replies
View Related
Apr 6, 2013
Can I create A B-Spline curve and a NURBS curve in the Adobe Illustrator?
Â
If yes, how to do it?
Â
Also, how to create a breakpoint, that will add a new control point, on a curve, in Adobe Illustrator?
View 5 Replies
View Related
Jan 4, 2013
I have a shape with a black stroke and green fill. I have a white line segment over it. How do I get it so that the end of the line segment doesn't show over the black stroke of the object? If I try to put the line segment behind the object, then the object fill hides it completely.
Â
I'm new to illustrator and I've tried to search for an answer but I don't know the best way to accomplish what I want to do. Seems like some combination of transparency or knockout groups and I've read a bit about this and can't figure out what I need to do.
View 3 Replies
View Related
Mar 24, 2014
I need an outline on a stroke that i drew but when i apply object>path>outline stroke i keep getting my initial stroke applied as well. I only need the outline, not the initial stroke. I use Illustrator CC.
View 4 Replies
View Related
Apr 9, 2013
I'm trying to figure out a way to automate a simple, yet repetative process I do countless times a day. Ideally, I'd like to tie it to a keystroke to speed up my workflow.
Â
I work on line art and colorways for footwear, so the way I'm coloring these shapes and strokes break apart the different materials and pieces of the shoe.
Â
While coloring line art, I work with Pantone spot colors as fills for closed path objects. I then have to manually apply that same color to the stroke, set the stroke to 0.5px weight, convert that spot stroke color to CMYK, and add 15% to the K value.
Â
I found some code in an older post for applying the actively selected object's fill color to the stroke, but I'm having but I'm having trouble with the next step of figuring out how to take that spot stroke color and convert it to a CMYK build that I can then add 15% black to. Is this something that's even possible? I've spent about an hour playing with the script and have only had luck matching the fill color or turning the stroke white.
View 13 Replies
View Related
Aug 2, 2013
I have an image that has a black stroke around it. I'm wanting to make that transparent and add a stroke to the outside of the black stroke, so it will basically be an invisible space there. Is that possible or is there an easier way?
View 1 Replies
View Related
Apr 17, 2013
I've not run into this before, but haven't used Pshop CS 6 a lot. I am setting the stroke to 0 and none, but Photoshop keeps putting a stroke around the shape:
Â
[URL].......
Â
Not sure what is wrong or how to fix it.
View 2 Replies
View Related
Aug 17, 2012
I can't get a stroke on pen despite following tutorials
View 3 Replies
View Related
May 21, 2008
(CS3 XP) I was extracting an image from a background and when I was done (using layer style) I put a stroke around the image to see if I'd missed anything. I then copy and pasted a few things on that image and combined the layers of the image, neglecting to remove the stroke.
I then went about extracting some other images that were on the same file. When I went back to my original image I couldn't remove the stroke that was around the image and I couldn't step backward far enough to reach the stroke. The fx symbol was not on that layer so I couldn't drag it to the trash. Am I stuck with it? Did combining the layers in effect flatten it? It was a pretty complicated image and I'd rather not have to redo it. I tried restroking the image and setting the opacity to zero but that didn't help. Is there a way to undo a group of layers once you've combined them?
View 3 Replies
View Related
May 19, 2009
I'm designing a tattoo, and I've been driven to distraction trying to get a part of it right. Basically, it's in an elongated circular shape, to go over the top of the shoulder. It's a Tongan design, and part of it requires a line of diamond shapes following the curve of each side of the circle from top to bottom. At the moment, I'm just copying a diamond shape and putting it in, and then using Transform>Distort to wedge it in place. However, it's both slow and not too good. I then had what I thought was a brainwave - draw the parallel lines straight, add the diamonds, and then curve the whole thing into place. I've tried doing this using Transform>Warp, but the amount of swearing emanating from my office is annoying my girlfriend Has everyone got a better way of doing it? I'd really like to be able to almost draw it as a path, just putting anchors in, and then having the pattern follow the path.
View 4 Replies
View Related
Aug 28, 2012
I am using CS6 on iMAC with Lion.
Â
I am working with a fairly large document about 36' by 84" to be used as a pull up banner.
I am put a rounded corner rectangle shape (white) over another color (green).
I am getting a lighter green outline around my white shape. This outline shows through the layer that When I look at layer style in the menu, it doesn't show that stroke is selected.
I click on layer style and stroke is selected, so I click it off. when I go back in it is seleceted again.I just can't seem to get it clicked off. And I don't want that stroke on my banner.
View 2 Replies
View Related
Apr 28, 2012
I, i can't stroke a path. Pen Tool, design the path, click on the right bottom on top of the path to stroke path, choose brush and select simulate pressure and this just messed all of my pics with some lightning background effect.
View 2 Replies
View Related
Aug 15, 2012
I have an action I created that calls for Angled Strokes. It had worked perfectly for months and now I get the message "Angled Stroke Not Currently Available" when I execute the action.
View 3 Replies
View Related
Sep 16, 2008
I want to change the opacity of an item or layer, but that also changes the opacity for the stroke too, How can i change the opacity of an item without effecting the stroke.
View 2 Replies
View Related
Oct 27, 2008
I have 20 boxes that have to be linked like a flow chart over a black and white photo. Each box needs an opacity of about 50% white to insert text. Each box needs a 100% black stroke around it. But when I apply the stroke to the box and then lower the box opacity to 50%, the black stroke fades out as well. I can't find a way to allow the 100% stroke to remain 100% black around the 50% opacity box.
View 6 Replies
View Related
Jan 23, 2003
How do you add two stroke outlines to text? Meaning, the first stroke should be colored white, and the next stroke outside of the white color should be red.
View 5 Replies
View Related
Apr 27, 2008
I use PS CS3 in Windows Vista Home Premium.
I am trying to stroke a Path or Selection with an custom brush that I Defined. For some reason the brush wont even leave a mark on a blank image.
View 1 Replies
View Related
Jun 25, 2005
I am having trouble with my image sizing I think. Recently when I have wanted to add a stroke to my work, a 1 pixel stroke looks like what used to be a 10 pixel stroke. I think it has happened to me before but I forgot how I ficed it....any suggestuons? I know that it has to do with the size or maybe resolution of the image..
View 2 Replies
View Related
Jan 2, 2005
i try to fill say a circle or something using fill or the paint bucket it never makes a nice smooth circle. There is always some color outside of the space i selected just like the pic i attached.
It also does the same thing when i but a border around something with the stroke feature.
View 2 Replies
View Related
Apr 2, 2006
ive been drawing round this photo in PS and now i want to stroke that path.
Basically ive gone to paths selected the workpath then gone to the bottom and hit stroke path with brush. Ive got a 6px round brush on but all its doing is stroking the bits where the path points originated. This has left me with a join the dot type situation.
View 3 Replies
View Related
Mar 27, 2004
I am having problems creating a stroke path in Photoshop CS. I will create a new path, and then apply a stroke path with brush tool setting. For some reason it only is stroking each anchor point and now along the line (path).
So basically I have a basic wave path. It has 3 anchor points, and the stroke path is only making a circle around each anchor point rather than stroking along the path. It is real frustrating because I tried all different settings on the pen tool. Are there specific settings I should have set when creating my path? What am I doing wrong?
View 7 Replies
View Related
May 15, 2006
I have completed a couple tutorials on how to make a rectangle and a circle, fill them with a solid color and then give them a black outline or stroke.
I then made an Octagon with the polygon tool but when I right-clicked to bring up the context menu as I had done before to stroke the octagon the menu was totally different. I then whet to edit and the stroke selection was greyed out.
View 9 Replies
View Related
May 7, 2009
I created a path using the pen tool, but when I try the stroke path option it just doesn't do anything. I have selected my brush, changed the width of brush, etc. But when I stroke the path and choose brush and click ok, the path always looks the same as before.
View 4 Replies
View Related
Dec 8, 2008
I had overlapping shapes with the stroke layer style and I wanted to erase part of the shape so it was white there rather than a line from the overlapping. Apparently now with CS4 you cant just simply erase lines if the layer you are in has a stroke layer? Cuz when I erase, it just like pushes the line, which ultimately is very cool, if I wanted to keep the line but erase the shape to create a custom one. But I just want to get rid of the line. I think I knew how to merge shapes in CS3 for them to share the same outline, but I dont know how now. Plus I dont think that is what I want cuz I only want the shapes to share the outline in a specific area.
how to merge shapes though? Like if you put two circles together like a ven diagram and then merge them so they have 1 outline not intersecting it gets rid of the middle lines that create a sort of () shape and instead you have 1 big outline of 2 circles?
View 4 Replies
View Related
Mar 23, 2008
i try to stroke a path, it works but something is wrong
it always just makes little circles where the Anchor Points of the path is
it never works
View 5 Replies
View Related
Dec 21, 2004
i use the 'Single Column Marquee Tool' i get a Warning Message: "No pixles are more than 50% selected.The selection edges will not be visible." And when i use the 'Square Marquee Tool' to stroke it comes out blurry kinda like blurry or looks like a spray paint effect or something.How do i fix this and put the default setting back.
View 3 Replies
View Related
