I want to create an extension of the text using a path but the colors mismatches even though I selected the same color. i guess something's wrong with the brush settings but the opacity and flow is 100% but still it seems to be transparent?
View 1 Replies
I'm learning how to create extension (flex - extension builder) for Illustrator and how to make it communicate with a plugin.
The samples provided in the SDK detailed how to load /unload extension from a menu item from Illustrator, and how to add / remove EventListeners to make the magic happen.
to sum up, this is something like that:
1- click on the menu item
2- load extension
3- add listeners
4- do your stuff......
5- remove listeners
6- unload extension
Basically my plugin is a module/service which is in charge of dealing with / modifying artwork tree. It has no User Interface.
My extension will have a user of this service.
What I would like to do is to load my extension as soon as my plugin is loaded, and unload the extension when the plugin will be unloaded.
Or notify when extension is loaded or unloaded.
Is that possible and hw could I achieve that?
I want to create text along a path (or even a elipse) - quite similar to the "the photoshop guru's handbook" logo at the top right of this page. I have numerous books/ bibles for photoshop -
View 9 Replies View Related I am using a very old version of Photoshop (i.e. Photoshop 6.0).If it is possible to create text along a curved path in Photoshop 6.0 (Windows)? If so, how?Note that I do not want to create wraped text (using Arc etc.).
Specifically, I want to type text along the lower half of a circular image.checked various blogs that show how to do that for more recent versions (or MAC version) of Photoshop.
Is there a new way to fill a shape or path with text in CS6.
When I create the path I can put my text tool "over" the path & my cursor switches to a curved line through the cursor, but when I place the cursor "inside" the path it just goes back to regular cursor & if I click inside it just starts a new (regular) text layer.
In older versions as soon as I placed my text cursor inside the path it would switch to the text cursor inside parenthesis. And thus type inside the path. That doesn't happen anymore.
Is there a plugin for creating text that follows a path created by the user? I understand how to arch text. That isn't working for my project. I need to plot a path and let the text follow it.
View 8 Replies View RelatedHow would you create a path which traces the central path of text. Not an outline path..Or the fill when you create outlines
If you imagine a single line following the middle of text. This would then allow me to place circles on the path to allow me to use for making rhinestone tshirts.
For text i can easily use TYPE / Create Outlines
but what about Create Path Around Object or PNG with Transparancy ?
i know about using Pen Tool and create Path , but it takes much time and my final work not perfect as i want
is there any tips to create path around and image object ?
I'd like to outline some text, so I went to the Text tool, entered the words, highlighted them and then looked for the button that would let me create an outline path. It's not there. Plain and simple. There's an empty space between "language: English" and the tool pre-set buttons. I checked under the paths dialog, but the option isn't there, either.
I've never used the text menu before - actually, I've just never used GIMP before. Perhaps I'm missing something obvious? I read a couple of tutorials, but none of them said that you had to do anything other than highlight the text to make the "create path from text" option appear.
I'm using 2.8 and Windows XP.
I use the path tool to create the shape of the text line I want to curve. I enter the text I want with the font, colour, etc, and select text along path. The text goes where I want it, but no matter what I have tried, the text colour along the path (my curved text) is always red and it doesnot look like the font in my text area. I can change the font / colour of the original text which works great, but the text along the path doesn't seem to change.
View 5 Replies View RelatedFor some reason I am unable to create text to follow a curved path. For example, I created a simple curved line using the shape editor tool. After selecting the completed line I select the main text tool (the other text tool, fit text to curve, is grayed out and not selectable). However, wherever I insert the cursor along the curved line I still end up with a straight line of text. After much experimentation I still cannot figure it out. I know I am leaving out a simple step.
View 3 Replies View RelatedI placed text on a shape and outlined it. As soon as I create a compound path, the result appears lighter than the originally outlined text (on screen and printed), although the paths seem to be identical when I overlay them. Same happens when I divide the paths.
View 21 Replies View RelatedI want to be able to transpose the perspective of the existing image to my new 3D prism shape.Why can't I create a path.. and then drag nodes on that path.. and warp the pixels at the same time???
It shouldn't apply to just 3d.. because I should be able to draw a rigid path around anything and warp / stretch the image from those points.
I'm trying to create an effect of small text following the outline of very large bold block text (see picture). The idea I had was to first create the 'ME' in very large font as text. Then convert that text to an object / path using "Object -> Flatten Transparency... -> "Convert all text to outline"". Then, select that path and use the "Type along path" tool.
However, when I use that process, the resulting path is a compound path that therefore the Type Along Path tool doesn't work. Any pointers on how to achieve this? The image below I just used the pencil to trace the letters (quick and dirty) but the result is choppy, etc.
I'm trying to place text to a "curvy" path. I took some screen shots to show you want I'm talking about.
I created a simple curvy path 1 point on each end. (I noticed I drew in a node in the middle of the curve as well. But that actually doesn't exist in the path. I created the text a reasonable size and clicked "Text Along Path". As you can see, it never starts at the beginning of the path. Ever. I have sized the font up, and it gets a little closer to the beginning, but obviously the end of the address flies off the path. I've sized down the text and it will start even further to the middle of the path.
I have no problem getting my text along a path but I am having trouble getting the text and the path to align so that the center of the text element is centered on the path.
Is this possible or do I have to figure out someway to make my path of a certain length so it ends up that the text fits to it perfectly??
Here is a screenshot of my current problem. You can see that the text and the image below it are centered. I then placed some guide lines to make sure my path was also centered. When I placed that text along the path though, it left justified the text when I want it to be centered instead..
I have some negative space I created(black area, see first image) that I want to fill with type, not just a simple fill.
Basically I want to create the negative space from a bunch of small minus signs(-) that need to line up as they go across. If I type on each path one at a time as the text doesn't line up that way. This needs to be one continuous path. (see second image)
Unfortunately if I add them together, it creates a compound path, which you cannot type on, unless I am mistaken? So I need them to be a path, not a compound object.
Actually, I have more than 6 years experience on Catia V5 customization and vb and vb.net catia API's. What I am trying to do know is converting some applications or programs running on catia to the inventor.
The first program deal with the inventor API relating to the SweepFeatures class. So my first problem is about to find the right way to use the sketch3D for the creation of the path which is the input of the sweep method.
(oInvPartFeats.SweepFeatures.AddUsingPath(oInvProfile, oInvProfPath3D, kNewBodyOperation).
I know That is possible to create a path by using the CreatePath method when the input is SketchLines or any guide curve in the 2D Plan. Also, I tried to generate path by using the ProfilePath3D method of the sketch3D class but No way, the AddUsingPath method of the SweepFeatures Class doesn't accept it as path Input.
So I cannot imagine that is limitation of inventor because it was possible to do it by using the seep function of the model tab in the ipart document. How to create the path object as an input of the AddUsingPath method of the SweepFeatures class.
I've tried every permutation of copy and paste; I renamed the path to path. It looks like a path when I add stroke, but it does not behave like one. I can't cut it or join it to any other path. It remembers it's text path status. I'm running OS X 10.7.5.
View 11 Replies View RelatedI accidentally converted a path to a text path. I searched the forum for how to convert it back to a regular path. The answer I found said to select the path and hit Command+C+F. This gives me another text path! I now have at least 6 copies of the path in my files but they are ALL text paths and none are visible with a stroke.
View 5 Replies View RelatedWhy the "Text along path" feature hovers the text so far above the currently active path? (in my case, the space between the path and the text is about 3 times the height of the currently used font!). I've been told that the letters should lie on top of or at least closer to the path instead. How can I move the text closer to the path?
View 2 Replies View RelatedIs there any function or script that auto-adjust tracking so text on a path meets the exact end of the path/bracket?
View 4 Replies View RelatedI'd like to know how do you add colors to paths. I'd also know how to make one end of a path more lighter and sharper. Also I'd like to know how to sort of blend colors into a path.
View 1 Replies View RelatedI drew a path in Illustrator and it won't let me apply some brushes and colors to it. When I click on the object the stroke color shows a different color than what it actually is. Another shape I drew at the same time is recoloring just fine, but the other one will not. How do I get the colors to work on my path?
View 1 Replies View RelatedWould like to get the text above and below extension to align
View 0 Replies View RelatedI'm trying to change the colors of a pathItem corresponding to the string value of several text fields in my document. I've been successful in changing the fill and stroke color of the pathItem, but I can not find any reference in the Illustrator Javascript Guide for accessing additional strokes and/or fills that have been applied to the object in the Appearance panel.
View 1 Replies View RelatedWhen placing a dimension with the text outside of the extension lines, it defaults to placing the text either above right or below left of the arrows. If you try to grip/drag the text to another location (i.e. below right or above left) it won't allow it. I don't know if it is following some standard, but in the example shown, I had to explode the dimension to position the text in the preferred location.
View 3 Replies View RelatedIs there a way to remove the extension line from a leader (when using the Leader Text command)? I'm trying to end up with just text, an arrowhead, & a straight line. It would look like this:
<---------- TEXT
as opposed to:
TEXT
/
<----------/
(Is that the best diagram ever, or what?)
I created text on a curved path using the pen tool and the the type on a path tool. However, there are portions of the text that I want to taper. For example, my text begins horizontally, continues to the right, and gradually curves downward. As the text curves downward I would like it to taper smoothly into a narrower and narrower text.
View 1 Replies View RelatedThe customer wants a gradient background with the PMS Colors 485 c & 1375 c.. This file is going to china and china only takes illustrator files.. So how can I do this in illustrator cs5?
View 1 Replies View RelatedI'm using Inventor 2011 and I can't figure out how to set my dimension settings so it breaks the dimension extension lines automatically when crossing over other dimension extension lines. I saw that others say it just happens, but it is not "just happening" for me. how to set my dimensions so when dimension lines cross each other one of them automatically breaks?
View 9 Replies View Related
