I've edited a picture of an old house.... made it look like it was taken in the 1920's. Love the way it looks, I used multiple tools... gradient overlays, noise, sepia tones....on and on..... Now I want to take every action I used from my layers pallet and apply them to the next 20 photos. I'm using CS3
View 4 RepliesI have copied the contents of an intermitant disk into a new one; outside of ligthroom(4). How do I copy the edits embeded into a ligthroom catalog to the new disk? Both disks have the same files. My master catalog sees the edits in the original disk. This same catalog sees the new disk without the edits in the original disk.
View 8 Replies View RelatedIs there a way to prevent edits to transparent layers? I have a very frequent problem where I change visibility on a layer but neglect to change the active layer and end up making unwanted edits that I can't even see the results of. Sometimes this means I don't manage to undo these changes while I still can!
There is never a case where I want to make changes to a layer I can't see (making changes without knowing what they are is the opposite of useful). Is there an option somewhere to prevent this?
Also, is there a way to set visibility and set the active layer in a single click or keystroke? Part of the problem is having to always remember to do two things.
Is there an option to set no active layer I make the active layer invisible?
I often will copy a layer in the layers palette via option drag. If the original layer is linked to another, the new layer is also linked to the orginal layer I copied as well as any other layers that original was linked to.
Is there anyway to option drag to copy a layer in the layers palette without the new layer being linked?
I don't have the option to Copy CSS from layers | Creative Cloud. i have reinstall the product as they told me and change to English International and still no luckthe latest version i got everytime I update is
Adobe Photoshop Version: .13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x32
i made a photo collage in 20"by30", i want to copy it to a 25"by35" "new blank image" the problem is that when i copy the collage it only copies on layer, i have around 50 layers in that collage. I tryed to flaten the collage so it turns into one layer, but then i am stuck with just one big layer in the 25"by35". i want to add new pictures in the collage but its hard to blend them together when i have just one big layer.
Is there any way i can copy all the layers without having to flatten them first so i can keep they layers intact in the bigger image?
How can I copy layers from one image file to another?This is a useful technique if you have to reprocess a raw file in Lightroom to take advantage of newer features such as chromatic aberration correction. After reprocessing, you can paste all of your selection/editing layers from the old file on to the new file.
View 7 Replies View Relatedway to take multiple layers that I have linked together, then select an area on the image, and copy the linked layers that are within this area so that I can paste them somewhere else in the image and each layer will remain intact, so that after copying this selection of layers I can still turn them on and off along with the original layers they were on. basically want to copy a selection of multiple layers while allowing them to stay linked together. I can copy a selection of multiple layers, but they merge together instead of staying on separate layers.
View 1 Replies View RelatedI am editing figures for a journal and I need arrows for multiple images. Is there a standard arrow? I can only see free hand. If I use a free hand arrow I then want to copy it to the other images for consistency. How do I copy or share layers between images?
View 1 Replies View RelatedI need to make multiple duplications of the same layer. This will solve my problem, however after I get the results I want, if I merge the layers, it reverts to the look as if I only had one single layer again. This will also happen if I do not merge the layers but save it as a PDF to get it ready for print. This results in a very muddy/neutral results. I have tried to simply select the layers and copy as merge, select everything and copy merge into a new document, and flatten/merge the image. None of them worked and reverted the image to the original one layer look.
View 8 Replies View RelatedHere are a few copy merged layers, which I dragged in from another image; now I need to remove the extra stuff;
clicking on the mask icon gives the prohibitory sign.
Okay, likely a stupid question - I have a map I created as a .psd with multiple layers. I would like to create a document with two copies of this map in it so I can print two maps on one sheet of paper (i'm trying to save paper).
How do I copy all layers over to this new document? Is there an easy way to make a new document with 2 instances of my map?
way of making a merged copy of a number of layers?
I know the Alt/Ctrl/Shft/E shortcut, but this requires turning evertything off except the layers to be merged. In a large doc with some layers already turned off, turning everything on and off quickly is not always straight forward.
Is there a way of merging linked layers perhaps?
I have a photo open in Expert with a blank layer above it. I selected the quick selection tool and drew a complete circle around the object I want to copy from this photo and to paste the selected area to the layer. However, I get a pop up box stating that the copy command cannot be completed because no pixels we selected.
I followed book and online instructions on selection tool uses while in Layers and can't seem to get past this pop up box.
Why are my edit commands (copy and cut) grayed out / unavailable? When trying to copy a selected layer or object, all my editing commands are grayed out and unavailable. Even if I convert something to a smart object, no joy. The only thing I seem to be able to select and copy/cut/paste is text in the text edit mode. makes no sense and is rendering PS unusable.
View 5 Replies View RelatedI am using Adobe Photoshop CS6, latest version as of 05/25/12.I have 19 layers, each has a 1200x1200px texture. These are of course overlapped, so setting them all to visible will only show the top layer.
All layers are rasterized, and contain 1200x1200px:
1) I select all 19 layers using shift+click, all are highlighted (in the layer pane).
2) I select a region using the selection tool, in this case a rectangular region that is 172px high and 35px wide.
3) I right click the selection, and then select: layer via copy. (Note, Layer via cut is disabled for some reason)
4) *problem* It creates 19 new layers with the full image from the selected layers and not the selection which is what I wanted to place in the new layers.
5) *problem* when I right click the selection and select "Free Transform", the transform box surrounds the entire canvas and not the selection.
6) *problem* when I skew, it skews the entire image and not just the selection.
7) *problem* Previously, I have been able to select a layer from the layer pane, go to image menu, select adjustments, brightness/contrast, and adjust the brightness/contrast for just that layer. Now it wont let me.
8) *related problem* If I have 3 layers (background, 1, and 2) on a 1200x1200 canvas, with the image in layer 1 being 150px, and the image in layer 2 being 150x, each rasterized, and then stack the images on 1 and 2 over eachother, then select both layers, then select a region inside the stacked images, then select free transform, the free transform selection embodies all pixels inside the canvas (not the entire canvas this time) and performs the transform on these pixels and not the original selection.
If I do it making all the layers visible as well as selected, it behaves the same.What appears to be happening is Photoshop is ignoring the selection and for some reason is using a pixel region (or if pixels cover the entire canvas, the whole image) when performing actions intended for the selection.
What's strange is when I made these textures, I started out with 19 150x150 pictures, I set the canvas size to 1200x1200, selected all the layers in the layer pane, selected the 150x150 image in the middle, and was able to move all 19 textures to the top right corner, able to switch to transform on all 19 pictures, able to rotate 180 degrees all 19 pictures, was able to flip horizontal all 19 pictures, then able to copy all 19 pictures to new layers, move the 19 pictures all at the same time to the right 150 pixels, rinse and repeat, to eventually come out with 19 1200x1200 textures tiled from the 150px pictures. In other words, I did exactly what I am attempting to do with the 1200x1200 pictures with the 150x150 pixtures and it worked like a champ.
The end goal of course is to take a selection of all 19 of the 1200x1200 pictures, transform, then skew that image to make a collage of images applied to an added background. Performing this on all 19 textures and getting the same exact skew, etc would take days considering I need to do about 15 of different portions of the tile.
I've got a large project with an object that's dependent on a multitude of layers (over 17).
I don't want to flatten them because it's a large no no, and with they way the whole image is setup, idk if it's possible.
I want to just copy all the layers into a new .pdn file and save it separately so I can experiment with flattening without wrecking the big picture, as well as just having it for versatility for use in future projects.
So is there any way to copy an entire layer over? I don't mean magic wand it over to a new project (I just tried that.). I need all the settings with the layer, the opacity, filter settings, Title etc etc.
Pasting it over won't work since a lot of layers have filter settings like Overlay and the such.
I tried manually reapplying the settings, but there's so many different layers it's virtually impossible to figure which one needs which settings. It would be easier if AT LEAST the layer titles were transferred over, that way I could at least figure out which layers I'm looking at between the two projects, but I haven't figure a way to do it yet.
So is there any way to do this? Or any alternative?
And if not can it be added to a 4.X version? I think this would be a killer feature. I can think of a few other occasions
Is there a way to copy layers and all the objects associated with it from one drawing to another?
For ex: I am trying to copy office numbers and names (on one layer) from one drawing to another furniture plan drawing. Is there a way to import that layer and all the objects (the office numbers and names in this case) instead of copy/paste each object?
I have pdn file that has multiple layers so when I go to the one I want to copy to another canvas entirely, I used the lasso selection tool and copy.
Well, it did but what it copied was a blank lasso with the nubs around it. I think (I was just trying any and everything to get it to copy the image not a blank.) I think! I made a duplicate layer and then it showed up.
Is that the way to transfer one layer's image into another canvas? Or is there a surer and easier way.
I have about 25 layers and within my layers are sublayers and groups etc . I wanted to paste them to a new document but when I do this everything is pasted all on separate layers. Is there a way so it pastes as is with the current layer configuration?? I dont want to have to regroup and organise everything all over again.
View 2 Replies View RelatedI have AutoCAD Map 3D 2013. How do I copy/move objects such as lines and arces between layers that are in the Task Pane window, not the regular layers? I can't find the Layer Manager.
View 6 Replies View RelatedI have a company template file with standard layers that I need to match the layer properties of with a drawing I have already created. How do I do this?
View 7 Replies View RelatedI'm trying to build a sprite image for a website based on a graphic that I created with Paint.NET.
The graphic has about 6 different layers.
To make the sprite image, I need the items in one layer to be duplicated in the exact same spots only shifted down by an integral number of the height. So, if the original image is 400px, I stretch the canvas out to 1200px. Now I want to copy each of the 6 layers and paste them exactly 400px down, then copy each of the 6 layers and paste them exactly 800px down.
I'm guessing there is a way to do something like this using the scripting ability of Paint.NET, but I have never used that feature before.
I download an image of the net of a dog with a .png transparent background. open in paint it's showing the transparency which is great, now say i make another image (not a layer) of 400px, by 400px, and fill it white, I'm so used to in photoshop just dragging transparency masks/layers from one image directly into a new image,
I've tried everything in paint.net even tried making a new layer, filling that white, bringing the transparency image to the front. so the white layer is behind the transparency one, then copy/cut to the new image with a filled in "white" background.
but all that copies across is the transparency layer, unlike Photoshop there's no copy merged, move merged option. so how do you get to cut/move a bunch of layers as 1 into a new image either by drag and drop, or cut and paste?
How can I get rid of the "copy" suffix after duplicating layers, in a non manual way naturaly?
View 4 Replies View RelatedUsing GIMP 2.6.11 under Windows XP
Is this real? I am really amazed that there is no way to do this. Am I missing something? I have multiple images, each with a unique background layer. On top are multiple other layers, both images and text layers. I was editing one and was about to save it but then realized it was on the wrong background.
All I want to do is select four or five layers from this unsaved image with Background A, copy them and then open an image with Background B and paste them in so there will be minimal issues with alignments and such. I have been editing each of these four layers and there are a fair bit of changes that have been made to just throw them away and start over. The background is not the only difference between the images, it is just what I use as a reference so copying that over to the unsaved image would also require multiple layer copy/pasting.
I have already tried linking the layers but any copy/cut/paste seems to only work on the active layer, unless I am again missing something. This seems like a really fundamental function to not be supported.
How do I copy PARTS of layers containing many objects from one CS5 AI (v.15.0.2) doc into a new CS5 AI doc and keep/create the same layer names?
To start with, I have one fairly complex AI document with 100 layers, with several hundred items in each layer. For example, one layer named "Stars" contains 400 separate stars (not grouped), another layer named "Crosses" contains 300 separate crosses, and a 3rd layer named "Text" contains 200 separate words (not outlined).
If I select, by marqueeing a section of the image/artboard, some (but not all) of the individual items contained in the several layers, then paste that selection into a new CS5 AI doc, I cannot get them to create new layers of the same name. Instead they go into one general layer (e.g. "Layer 101") as a jumble of discrete, but unorganized objects (no layers or sublayers). In other words, I have lost the 3 main layers from which I selected a bunch of objects.
Checking "Paste Remembers Layers" has no effect on this result. In fact "Paste Remembers Layers" does not remember layers at all. Only if I select ALL the items in the several layers will it paste those layers by those names into the new doc (or create new layers of the same names).
Of course it is a COLOSSAL waste of time copying the ENTIRE document, then pasting the WHOLE thing into the new doc (with layers retained), then deleting the parts I DON'T need.
I am working on a project and when I try to copy and paste unlocked layers to paste them in to another image it doesn't paste. The only thing it pastes is the text unformatted. I tried resetting the settings by removing the setting file to see if I can set Illustrator back to square one and it isn't working. See Picture for before (copy) and After (paste)
[URL]
I am also using windows 8 on a pc. I would say it was the OS but it was working fine untill yesterday.
If I have BLOCKA on a layer (or specifically layer 0), how do you copy blockA onto every layers? I'm sure there are 5 ways of doing this.
View 9 Replies View RelatedI've tried dragging layers across drawings using the design center interface, but what I've noticed is that while the layer in question gets copied over, the layer is empty. The objects within the layer do not get copied over. How do I copy objects AND layers that I've selected across drawings using Autocad Design Center?
View 5 Replies View RelatedAdd a new menu item "Edit->Copy Flattened" which allows one to copy the selection from ALL the visible layers, instead of just the currently selected layer.
View 1 Replies View Related