I need to adjust the right hand selection to the same settings as the left one. The result should be perfect and invisble...
Do i use levels, layer or what? and is it possible to copy the values in one selection to another, and how do i do it?
I've got a model and i created a new level as normal, propogated extents etc but when i created as section North to South (Vertical) in the model the level does not show. When i create a section from East to west (horizontal) then the level appears fine. I've tried creating many sections and this is always the case. If i select a level in the section and click on select all instances in entire project the number includes the additional level but i can't see it. It is not hidden in the view, not on a different workset or anything unusual...
View 5 Replies View RelatedI know there's the setting in the Tools/Application Options/File dialogue that allows you to set a system wide setting of which LOD that opens each time you activate an assembly.
But what about a file specific setting where you are able to set a specific LOD that always opens for that specific assembly file? Or will that conflict with the system wide settings?
Granted, I know Inventor will open the last saved LOD (based on that system wide setting), but my client has users that, for a lack of better terms, are not paying attention or being aware of what LOD they are opening and thus editing the wrong LOD, etc.
I am trying to edit lighting styles for models in the edit wondow (not studio). On one only or several assembly models at once I am finding that the Style & Stnd/Lighting Editor has stability issues during editing.
After a number of edits to light settings using the scroll bars to change the lighting location, various buttons start to dissapear or turn black & the dialog fails to function, sometimes locking up Inventor.
Only solution is to close down & restart Inventor. Subsequent attempts to reopen & do it again result in same behavior if not worse.
If I copy something from one later and paste it onto another layer, it puts it dead centre and then I have to move it to align it with where it was. This is a bit of a hassle. Is there a way to copy from one level and then paste that item to the exact same place on another level?
View 4 Replies View RelatedWhat is the best way to add a floor level to a space where it does not interfere with how the building looks in section and elevation.
Everytime I add a floor and go to the section the walls are above the floor.
How to find the cross section details like area and movement of inertia at particular cross section
in( solid works there is a direct option select the section and select the face and click on the calculate automatically gives the are and movement of inertia etc in part and sassy level also) but in inventor in part level its possible but in an assembly level.
I can find a method to copy a Design View to a Level of Detatil (DesignViewRepresentation.CopyToLevelOfDetail)
But the opposite way (i.e. LevelOfDetailRepresentation.CopyToDesignView) doesn't seem to exist - it is possible in the GUI.
Will I have to traverse the complete structure and set visibillity one by one to obtain the function then? Or are there a better/faster way to go?
Where is the setting to tell the section line to begin? This line is cutting through our callout annotation circle, which happens to be sized larger than Revit’s default.
View 2 Replies View RelatedHow to set (not to get) maximum or minimum elevation of a grid of specific section view in COM API c++?
or Just tell me the name of the function in COM API c++?
The issue I'm having involves setting the number of copies to print in Photoshop's print dialog. Most applications I've worked with will set the dm Copies of the DEVMODE to this value and send a single page to be printed. Photoshop, however, is setting dm Copies to "1" (even if the default DEVMODE provide by my driver has dmCopies set to another value) and sending several identical pages to the driver. Obviously this can slow down printing dramatically when the copy count is in the hundreds.
I've observed the same behavior from Photoshop when printing with 3rd party drivers, so it doesn't seem isolated to the drivers I maintain.
My question is, does Photoshop always send multiple copies of an image as individual pages, or is it trying to set the copy count through an interface I don't support? If it is using a different interface to set the copy count what interface is it using?
I am just starting out in Civil 3D and we are using the 2011 version. Anyway I have created cross sections along the centerline of a profile. How do I get the elevations and offsets to show up without digits to the right of the decimal, in other words to the nearest foot (ie. 3820.00 = 3820, 50.00 = 50)?
View 1 Replies View RelatedWhy I can't copy a section of a layer.
I open a .jpg file and then using the Rectangle select tool highlight a section of the image. I then click CTRL+X and it actually cuts the whole layer showing me just the empty background.
All I want to do, is open the .jpg, copy or cut a section from it to a new image.
I am trying to adjust the noise level with the level tool but its not working. I move the arrows every which way see that it changes. I get it to were i want it them press ok and it only changes a little bit.
It become what it was in the preview. The level tool works when I add it as a new adjustment layer but I don't want like that I want to be able to copy the new level of noise I just made and can't if I add new adjustment. what should I do to fix this? O and this is the trial version and It wasn't working earlier with lots of other tool but i uninstalled it and now they are working except the level tool how I want it to.
I have created two images that have gradients applied to them and want to join them together with the gradients.I can't stretch the image because the lighter gradient follows and I just want that on the outside edges of both as shown in the image.
In effect - i want to take a small slice of the darker gradient and continue it on the x-axis to the other image without distorting the gradient effects.
I need to copy only the section views to other sheets.
View 2 Replies View RelatedWe have recently found the feature of copying the model iProperties to the drawing would be beneficial to searching for files in our ERP database. I am looking for a way to turn on the ability to copy model iProperties and select which properties to copy with a macro. There are several articles showing how to enable the feature and several ways to macro the same process. I have not been able to find a way to turn it on with a macro.
We plan to adjust our templates to enable the feature on all new drawings and add additional custom iProperties to the models that were previously only used in the drawings. I have wrote a macro to add iProperties to existing models that didn't have them when they were created. Now I am looking for a way to enable everything in the drawing. I see a great benefit to clicking a single button to enable the copy model iProperties feature and select several iProperties that will be copied without having to do it manually for every old drawing.
Is there a way to access the check box to enable this and to select properties within the API? If not, would creating a macro to do the copy from the model to the drawing be the best way to create that functionality in an older drawing or not? We have a little program that will give programmatic control over the mouse but creating code to access the feature that way would be more hassle than teaching our users to manually check the boxes.
I am having a little trouble with some doors showing up on the level 1 door schedule that are actually on level 2. They are curtain wall doors.
View 6 Replies View RelatedThe underlay does not show up for Level 1 when I am on Level 2, but it does show up for Level 2 when I am on Level 1. the underlay option is on for Level 1, so I'm not sure why it's not showing up. I am using Revit 2014.
View 1 Replies View RelatedSay I have an image where I'm attempting to extract a mask from and I've found that one of the channels will serve as a good starting point. Further suppose that I have found that I want to increase the luminance level of pixels in the range of 60 - 65 by 10 luminance levels each:
i.e. all pixels with luminance values of 60,61,62,63,64,65 would, after the operation have luminance values of 70,71,72,73,74,75. Is such a thing possible with Photoshop?
What is the difference between sharpen and sharpen copy in the presets section of LR? they seem to have the same effect, dont know which one to use
View 2 Replies View RelatedI have a keyboard shortcut for Copy (see directly below). This command doesn't copy multiple. But if I type "Copy" at the comment prompt (AutoCAD 2013) the copy multiple is the default. Copymode is already set to "0".
(DEFUN C:C()
(setvar "SNAPMODE" 1)(COMMAND "_COPY")
(PRIN1)
)
Best practices for setting up systems in a lab environment. We have a lab enviroment of about 200 systems that access AutoCad, Inventor, Mechanical and others.
We need to have a customized interface come up when Autocad is opened by students.I have read that you can do this with profiles and workspaces and also with loading a acad.lsp file.
In the past we have just copied the Windows admin profile used to customize AutoCad to the default profile. In AutoCad 2013 that does not seem to grab everything. It doesn't seem to be the best way to do what we need.
We will also be moving to Windows 7 soon which will also cause an issue.I want to find the best way to do this with out having to deal with the Windows profile.
I am trying to verify the bending strength of a solid part. Need to calculate the section modulus on certain cross section. Don't know how to do it using inventor.
View 7 Replies View RelatedI'm looking to basically do what this video shows:
[URL]........
I just want to create a section from the point cloud, but the point cloud won't allow me to select it as an object in the 'Generate 2D/3D section' dialogue as it's not a solid/surface.
On an unrelated note, I find snapping to the point cloud impossible - is there an option in OSNAP that I'm missing? I've tried this with attached PCGs and RCP point clouds, no difference.
I have lots of section views with some surfaces and pipes. Unfortunately, in a number of section views pipes are not shown in full height because the section view level range is too little. What I am wondering is - is it possible to automatically adjust section level ranges so that they fully include pipe sections? Please see also the image in the attachment.
View 2 Replies View RelatedC3D 2012...but this feature has probably been in C3D for sometime
1-What is a 'Line Marker in Section' Section component of an Alignment Style?
2-How is it used (example )?
When i am creating section sheets from multiple section views ,section sheet view port scale changes.I did set it correctly in my template.
For example it changs from 1:150 to 1:150_1
Then in section sheets scetions views are not displaying correctly.
When i change view port scale manually it shows correctly.But it should do to all sheets.
What should I do?
In model spacr multiple section views are showing correctly.
AutoCAD Civil 3D 2012 SP 2
Sri Lanka
Is it possible to add additional cross sections (sample lines added after views were created) to an existing Section View Group?
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
The section view behaves strangely with the ‘section participation: none’ components
Invertor2012 sp2
Win7 x64
why my section is not parallel with my section line. I did constrain my section line in the section line sketch.
View 2 Replies View Related