Photoshop :: Setting Print Copy Count In CS6
Sep 13, 2012
The issue I'm having involves setting the number of copies to print in Photoshop's print dialog. Most applications I've worked with will set the dm Copies of the DEVMODE to this value and send a single page to be printed. Photoshop, however, is setting dm Copies to "1" (even if the default DEVMODE provide by my driver has dmCopies set to another value) and sending several identical pages to the driver. Obviously this can slow down printing dramatically when the copy count is in the hundreds.
I've observed the same behavior from Photoshop when printing with 3rd party drivers, so it doesn't seem isolated to the drivers I maintain.
My question is, does Photoshop always send multiple copies of an image as individual pages, or is it trying to set the copy count through an interface I don't support? If it is using a different interface to set the copy count what interface is it using?
View 2 Replies
ADVERTISEMENT
Feb 28, 2014
I have just bought and installed Lightroom 5 and need to set my print size to A3 and in the future even bigger. I do not have the facility at home and need to have them sized correctly for the print shop so they do not have to waste time resizing them. I am at a loss how to do this. I cant find any settings for this size print. A3 is roughly 42 x 29.7 cm.
View 2 Replies
View Related
Jul 10, 2006
I need to adjust the right hand selection to the same settings as the left one. The result should be perfect and invisble...
Do i use levels, layer or what? and is it possible to copy the values in one selection to another, and how do i do it?
View 9 Replies
View Related
Aug 10, 2012
Here's a quick tip where you can set the magnification of "View > Print Size" to reflect the actual physical size of your document.
1. Measure the horizontal viewable size of your monitor or laptop screen. For example: 13.75 inches.
2. Note your horizontal resolution. 1366 pixels for instance.
3. Divide pixels into inches to get your screen resolution per inch. 1366/13.75 = 99.3 pixels/in
4 In Photoshop's Preferences > Units & Rulers, enter this value under New Document Preset Resolutions shown in the screenshot. Save and close.
After that,when you select Print Size,the document and even the onscreen rulers will reflect actual size. Now with Open GL graphics cards being fairly common,the odd magnification needed for those results won't appear jagged.
View 1 Replies
View Related
Oct 14, 2012
Print setting on a printer dialog is not responding. Now I have a new printer driver (Epsom stylus Photo R800)I cannot set paper size.This is a recurring problem. I have been trying to relaunch app holding control+ option+shift without effect.
View 49 Replies
View Related
Mar 25, 2014
How can i create a digital file for print with a CMYK setting?
View 3 Replies
View Related
Apr 9, 2012
Is there a way to print out the exact scale just like using manual printing or I just can use
// a 1 inch: 2 units scaleacPlSetVdr.SetStdScale(acPlSet, 0.5);// a 2 inches: 1 unit scaleacPlSetVdr.SetStdScale(acPlSet, 2);
By the way, setting for example (acPlSetVdr.SetStdScale(acPlSet, 2.04);
I get eInvalidInput error.
View 1 Replies
View Related
Jun 13, 2013
The Print setting in Photoshop remember everything for the file once reopened like 'type of paper, color profile, etc.', but not in Illustrator. It doesn't save the information about the Printing Preferences set with the printer for the printed file.
I don't have CS6 yet, but I'd love ask if this can be done in CS6?
View 2 Replies
View Related
Jul 24, 2013
I have a picture package I want to create. This needs to be the same image on different sized outputs. But you can only create a print package with one custom file size. Is there a way of setting LR to print to different sizes?
I know I can select page size as master size, and print with different sized cells on each page, but I actually want the page size to be different.
For example
page 1 = 8x10 page size, with 8x10 cell
page 2 = 8x12 page size with 8x12 cell
page 3 = 8x6 page size with 8x6 cell
page 4 = 8x6 page size with 2 of 4x6 cells.
I single image, printed on 4 different size pages...
Could you modify the LRtemplate file? Its the global settings bit that concerns me, I dont want a global setting of
_globalSettings = {customFileHeight = 576,customFileWidth = 432,I could do with these file dimensions different for each print.
Can it be done?? has it been done??
even if itspeople pointing me towards different software.
PS - I'm using LR4 but LR5 doesnt have this option either.
View 1 Replies
View Related
Dec 3, 2013
We have recently found the feature of copying the model iProperties to the drawing would be beneficial to searching for files in our ERP database. I am looking for a way to turn on the ability to copy model iProperties and select which properties to copy with a macro. There are several articles showing how to enable the feature and several ways to macro the same process. I have not been able to find a way to turn it on with a macro.
We plan to adjust our templates to enable the feature on all new drawings and add additional custom iProperties to the models that were previously only used in the drawings. I have wrote a macro to add iProperties to existing models that didn't have them when they were created. Now I am looking for a way to enable everything in the drawing. I see a great benefit to clicking a single button to enable the copy model iProperties feature and select several iProperties that will be copied without having to do it manually for every old drawing.
Is there a way to access the check box to enable this and to select properties within the API? If not, would creating a macro to do the copy from the model to the drawing be the best way to create that functionality in an older drawing or not? We have a little program that will give programmatic control over the mouse but creating code to access the feature that way would be more hassle than teaching our users to manually check the boxes.
View 3 Replies
View Related
Aug 1, 2013
In the past, I've encountered the transparency issue where I've gotten the "ghosting" or discolored box around images when printing from PDFs created in Illustrator. I've always solved the issue by checking the option "print as image" in Acrobat. I noticed, however, that the colors are much less vibrant and almost "muddy" when this option is checked.
Is there another/better technique to remove the "ghosting" effect when printing in order to preserve better coloring?
View 1 Replies
View Related
Jan 23, 2012
I receive drawings from a company that uses a custom color of 0,0,255 in their drawings and it plots out blue even on monochrome. How can I make a pen setting so this plots out black?
View 5 Replies
View Related
Dec 6, 2000
I just got Autocad 2000i as an upgrade from 13 and 14. I have a summagraphics HiPlot 7200.It was set as a windows system printer on the old autocad versions, 2000i will not accept the widows driver (which works great on the old systems) and i have to use hpgl emulation wich sucks on 2000i
View 2 Replies
View Related
Oct 2, 2012
I have to set up my drawing on the model page so that I can save it as a PDF and then transfer it into adobe illustrator. My scale is 1:1, and when I put it on the model page I'm doing a 1/8" : 1' scale. It should fit on the page no problem, its only a 9" model plan on 1/4 scale, so it should be 4.5" on the page. However, it's too big for the page.
View 1 Replies
View Related
Apr 19, 2011
I'm doing some building drawings for Uni using AutoCAD 2010 and what is the best way (and process) to set line weights and types (dash, dot) for printing. What I’m currently doing doesn’t seem to be working and seems a bit inefficient.
The way I am doing it at the moment is that I have put all the various drawing elements on different layers with varying colours. I am then going through each layer in the layers dialog box and setting the line weight and line type as required.When in paper space or plotted the lines all come out solid/continuous and with same weight. (Note: I have used LTSCALE so that the dashes are viewable in model space). So here are the questions: Does the line weight and line type you set in the layer properties equal what should be printed? At the moment it does not for me. It is best to create all your layers and individually edit each layer for line weight and type, or is there a quicker way to assign line properties? I think I read that you could assign different properties to colours, but not sure what this means.
View 1 Replies
View Related
Nov 28, 2013
Let's say that I have three stops difference between the luminance of my computer screen and the paper white under the lamp in my room. Which setting should I use for the brightness slider on the print module?
View 2 Replies
View Related
Mar 3, 2013
I just purchased photoshop elements 11 and I've tried to print more than one copy. The dialoge boxs says the number I wish to print. but it still only prints one copy. Also, I saw a way try and reset this from the welcome screen, but I chose to have it open directly to editor. So my welcome screen doesn't come on anymore. How do I reset this.
View 9 Replies
View Related
Apr 23, 2012
AutoCAD 2013 crashes during the plot configuration for our printer. When I select Custom Properties for our Kip 5000 Series Printer I get an Unhandled Exception popup. When I click continue I get a message that "AutoCAD Applicaiton has encountered a problem and needs to close", the program crashes. AutoCAD 2013 will not let us select the kip 5000.pc3 file we used for Autocad 2012.
How can I set my printer up if it keeps crashing the program. Is there a new driver for 2013, if so where do I find it. Is it from AutoCad or the printer company Kip America (who have yet to reply to my email).
I have attached the error message
View 4 Replies
View Related
Jun 12, 2012
When printing from photoshop CS5 I am unable to print more than one copy at a time. Printing one copy at a time is annoying and time consuming!!
View 1 Replies
View Related
Nov 2, 2012
When I go to print a copy it automatically prints in color. If I want to go just black, which I like to copy everything in just black and white, I have to manually do it. Is there a way to make black and white the default.
View 4 Replies
View Related
Oct 2, 2013
Is there a way to copy the names of all the fonts I have listed in X-5 so that I can print the list?
I want to be able to check some things off the list and add other fonts to the list.
I tried opening the font list and highlighting to copy it to a clipboard.
View 2 Replies
View Related
Aug 29, 2013
I am a Mac user and new to AutoCAD. I am enrolled in a CAD class this semester and the instructor for my session is requiring Windows. Supposedly this is because AutoCAD for Mac does not allow for proper printing on their plot style setting.
I understand that I can install Bootcamp and Windows on my computer, but I'd really like to avoid that if I can. If I were to do my work on my Mac and then digitally transfer my files to a PC for printing purposes, would my files become corrupted or compromised in any way?
View 2 Replies
View Related
Jan 10, 2012
I'm having an issue printing to a Panasonic DP-C322 PS printer. I send my image and ask it to print multiple copies. The result is just a single copy of my image. If I use the PCL driver, the image prints in multiples, as expected.
View 1 Replies
View Related
Aug 23, 2013
I have a keyboard shortcut for Copy (see directly below). This command doesn't copy multiple. But if I type "Copy" at the comment prompt (AutoCAD 2013) the copy multiple is the default. Copymode is already set to "0".
(DEFUN C:C()
(setvar "SNAPMODE" 1)(COMMAND "_COPY")
(PRIN1)
)
View 4 Replies
View Related
May 4, 2008
I am using Photoshop CS3 for Mac with a Nikon D70s shooting JPEG images. Can I determine my shutter activation count for the D70s (metadata in EXIF) through CS3?
View 2 Replies
View Related
Sep 4, 2012
Best practices for setting up systems in a lab environment. We have a lab enviroment of about 200 systems that access AutoCad, Inventor, Mechanical and others.
We need to have a customized interface come up when Autocad is opened by students.I have read that you can do this with profiles and workspaces and also with loading a acad.lsp file.
In the past we have just copied the Windows admin profile used to customize AutoCad to the default profile. In AutoCad 2013 that does not seem to grab everything. It doesn't seem to be the best way to do what we need.
We will also be moving to Windows 7 soon which will also cause an issue.I want to find the best way to do this with out having to deal with the Windows profile.
View 1 Replies
View Related
Sep 12, 2013
I'm using CS6 (x64, windows), and I'm extruding vectors by a few points to make 3D models of decorative walls for our modelers. They've constantly told me that there are far too many polygons in the models that Photoshop generates (mine are averaging between 20,000 and 30,000) and that even 3DS Max's "optimize" tool can't take it down to a really managable number (generally they only get them down to around 10,000).
Is there a way to reduce the number of polygons in models generated this way in Photoshop? Even the super simple ones that I extrude (with no curves at all) end up containing around 8,000 or 9,000.
View 2 Replies
View Related
Sep 20, 2011
How to get count of path anchor points? I'm pathing right now pearl necklace with very diferent colors and some are almost transparent so i didn't know how to use any masking trick on it. So i'm pathing, pathing and pathing one more time. And after 1+ hour start to wondering is there any way to know how many path points i'd made?
View 10 Replies
View Related
Aug 19, 2007
Lets say I have a B&W all text document in PDF form and I want to know what percentage of the document is taken up by text (lets say I was trying to figure out how many pages I could get out of an ink cartridge based on the page yield at 15% coverage). My first thought is to drop it in photoshop rasterized at 400dpi or so, and use the magic wand or cntrl-click the layer to select all the text and open up the expanded histogram palette and read off how many pixels are selected then divide by the total number of pixels in the document to get a percentage of coverage.
This does not work however... the pixel count shows a low number (7000 pixels or so) that obviously isn't right but when I take the magic wand and start selecting character by character the pixel count quickly climbs past the original low number so obviously something isn't right.
View 2 Replies
View Related
Jan 10, 2012
why the sites spider count as trebled since the upgrade?
View 9 Replies
View Related
Apr 16, 2009
I need to know the exact number of pixels that I select for a size comparison. It's a non-rectangular selection similar to a cloud.I'm using CS2 but could upgrade if needed.
View 2 Replies
View Related
