What is the best way to add a floor level to a space where it does not interfere with how the building looks in section and elevation.
Everytime I add a floor and go to the section the walls are above the floor.
How do I show high level walkways and balconies (in dashed outline) on the ground floor plan in a high volume space?
Obviously I can turn the first floor RCP on in the view and manually draw the information, but I assume these lines won't move if the walkways above move (or am I wrong?). Also this seems slightly wrong given the amount of automation available.
My template don't have Floor Plan and Level.
View 1 Replies View RelatedI accidentally created 2 levels representing the third floor. This is confusing and no doubt will lead to unexpected behavior when the model gets more complex. How can I delete a level?
View 5 Replies View RelatedIs there a way to change the level that a floor plan view is associated to?
View 4 Replies View RelatedI have a floor joist/subfloor/finish floor system where the joists are hung from the sill inside the foundation wall, this means that the joists stop at the wall but the subfloor will continue over the sill plate and the finish floor will stop at the inside edge of the bottom wall plate. As near as I can figure, in order to get this to show correctly in section I really need to create the complete floor assembly by stacking 3 separate floor sub-assemblies (framing, sub-floor, finish floor) is this correct? (this is the method I'm currently using) Is there a way to manipulate the sub-components in section that I haven't found?
View 2 Replies View RelatedI've got a model and i created a new level as normal, propogated extents etc but when i created as section North to South (Vertical) in the model the level does not show. When i create a section from East to west (horizontal) then the level appears fine. I've tried creating many sections and this is always the case. If i select a level in the section and click on select all instances in entire project the number includes the additional level but i can't see it. It is not hidden in the view, not on a different workset or anything unusual...
View 5 Replies View RelatedI have made my sections cuts through the floor plans, but when I view them, the walls I have cut through are not poched in to show that there is a solid wall there.
View 1 Replies View RelatedI created an underground parking level but for some reason, I can't create a Space for it even though it has walls, a ceiling, and a floor.
View 1 Replies View Related2 part question:
1) How do I keep a section line from showing up in two different elevations:....have a section line in east elev.....it shows up in same spot in west elev.....but the view is the east elev....only want to see section line in east elev?
2) While looking at my west elevation, I can see things in the east elev, which is 100' apart.....how do I keep from seeing(and selecting!) things in the east elev while looking at the west elev?
I'm looking to basically do what this video shows:
[URL]........
I just want to create a section from the point cloud, but the point cloud won't allow me to select it as an object in the 'Generate 2D/3D section' dialogue as it's not a solid/surface.
On an unrelated note, I find snapping to the point cloud impossible - is there an option in OSNAP that I'm missing? I've tried this with attached PCGs and RCP point clouds, no difference.
I am trying to figure out how to see the first floor in a five floor building. This model is a 3D Cad file imported into Revit. I need to look inside the building and place equipment on the first floor.
View 3 Replies View RelatedI am having a little trouble with some doors showing up on the level 1 door schedule that are actually on level 2. They are curtain wall doors.
View 6 Replies View RelatedThe underlay does not show up for Level 1 when I am on Level 2, but it does show up for Level 2 when I am on Level 1. the underlay option is on for Level 1, so I'm not sure why it's not showing up. I am using Revit 2014.
View 1 Replies View RelatedI am trying to make a autoamtic elevevation as attached. but still no luck, i dont know how to do it.
View 6 Replies View RelatedI need to adjust the right hand selection to the same settings as the left one. The result should be perfect and invisble...
Do i use levels, layer or what? and is it possible to copy the values in one selection to another, and how do i do it?
How come i cant see the changes to the 2d section after adding objects to the model. I have refreshed the section and have also change to a different 2d style, however if i create a new section, i am able to see the changes on this new section but not on the old one. Is there any switch to this.
View 7 Replies View Relateddraw an interior wall elevation using the Golden Section as a basis for my design. I downloaded the AutoCAD 2012 version and it seems very hard to use.
View 5 Replies View RelatedHow to find the cross section details like area and movement of inertia at particular cross section
in( solid works there is a direct option select the section and select the face and click on the calculate automatically gives the are and movement of inertia etc in part and sassy level also) but in inventor in part level its possible but in an assembly level.
Attached is a pdf showing the issue I'm having with the way elevations labels appear on the outside edges of cross sections.
Issue #1:
I added the dimension to show that the bottom of the cross section is actually at 97.5 but is labeled as 98
Issue #2:
I would prefer the bottom of the cross section to be at an even elevation (98 not 97.5)
Can I use AEC Dimension in a Section/Elevation View in ACA? So, when an Wall height changes, the AEC will change too after refresh the section/elevation.
View 1 Replies View RelatedWhy not show the labels in sections?
View 2 Replies View RelatedHow to set the “height” of each floor?
I’m wondering how to set the height of each floor in the Revit to adjust the “height” of the wall accordingly?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
How do I turn off the elevation grid in the section editor when looking at the cross-sections of my corridor?
View 1 Replies View RelatedI have created the super elevation to my road as you can see on the attached picture, but I can't see the super elevation on my section view.
See attached.
I have duplicated many floors now in the Revit program and applied the same material to them and no matter what I end up with a duplicate area for that material in the floor material schedule takeoff.
Steps taken to correct this so far are:
1. Technical support @ Autodesk suggested that I uncheck the wrap part in the floor edit. The floor already has it unchecked and furthermore the wrap part is greyed out.
2. I have used parts and I guess that I can do this for it works. it is just that I would like to do floors because I don't have to spend time dividing them for a simple material takeoff.
I just want to be able to apply a material to a floor and have that floor shedule the area of that material only ONCE!
The issue is cutting an opening in an existing floor so that in only shows in a new phase.I have created a floor based generic family with an opening tool and added an edge liner as a sweep. It hosts onto the floor and cuts it OK (in section and 3D). BUT in plan view objects below dont show through - see blue dashed on the screen clip. You will see that the red dotted opening>vertical cut show the stair below OK. Have a go (floor opening lined.rfa) and tell me why the opening is opaque!
View 2 Replies View RelatedI want to attach a wall to a floor as shown in the picture. The wall has 2 layers. The Finish-Layer is supposed to cover the floor. (Now done by using the function "Top Extension Distance" for the finish layer.)I am searching for a solution that allows me to change the shape of the floor. The wall should then follow the shape of the floor.
View 1 Replies View RelatedMy stairs won't extend up to second floor. I am using Revit 13 and have created many stairs in past with other models. I have tried stair by sketch and stair by component but they keep stopping about 2 feet short of the floor drawing a standard U shape.
View 2 Replies View RelatedI imported a scanned drawing into Revit and traced it. I put the walls and floors in, then was inserting doors. I tried to find a particular door, but found I clicked on the wrong door and closed Revit instead of the screen I was in. However, when I brought Revit back up, I could no longer see any Floorplan, but my 3d was still visible. How do I retrieve or make visible Level 1 or 2? (When I tile the Floorplan Level 1 and the 3D drawing, my 3d drawing will turn blue if I box in the blank area on my Floorplan screen, so I assume it must still be there).
The other question I need answered is how to insert the geometric figure/camera that shows each side of an elevation? When I imported my scanned drawing, it was much larger than the area within the four “eyeballs”, but I have tried moving it and don’t see them.
I have a file that I have applied different floor finishes to different rooms based on flooring patterns and hatches - they are not visible in the floor plans . Funny thing is if I make a seperate room outside the project in the same view and assign it flooring patterns - it does show up all the floor finishes. The only reason I can think of is phases. I have attached images for reference.
View 1 Replies View Related
