Photoshop :: Color Sweeps
Nov 14, 2002How were the various different colour "sweeps" () done? I think that they're rediculously cool but I have very little idea of how to do them this well.
View 17 Replies
ADVERTISEMENT
AutoCAD Inventor :: 3D Sketch Vs Sweeps
May 10, 2007In Inventor R11, SP2 why :
(1) Why can't you use the Sweep command with a 3D sketch?
(2) Why can't you draw circles in the 3D sketch environment? What do you do if you need to sweep a cut with a circular profile along a 3D sketch line?
Revit :: How To Create Cornice Using Wall Sweeps
Sep 1, 2011I am trying to create a cornice using a wall sweep. I created the profile I need but when I load the profile and try to add the sweep to the wall Revit shuts down completely.
View 1 Replies View RelatedRevit :: Create EQ Ashlar Panels And Sweeps With Joints?
Feb 9, 2012What's the best way to create the attached: EQ ashlar panels, and wall sweeps with joints?
View 8 Replies View RelatedRevit :: Can't Update Wall Profile With Sweeps On Both Side
May 30, 2013I'm, trying to update my wall profile so that all of my interior walls have baseboard/molding on them. I've been successful in creating a wall profile with molding, but only on one side. Looks like this in plan view. (Molding is highlighted and only on one side.)So, I first try to update my wall profile like this:
And I either duplicate, or add another sweep to the wall, and make that "Exterior" as to be on the "other" side of the wall.However, after pressing "OK" and "OK" at the wall profile editing box, I get the following error box:
When I click on "Show", I'm shown nothing. When I click on "Enjoin Elements", this same box comes up no matter how many times I click on the "Enjoin Elements" button.
Having problems adding molding to both sides of their interior walls? Am I going about this the right way? Tried to smallify the actual .rvt file, but I can't get it down to an acceptable size for posting here.
Revit :: Adding Wall Sweeps To Wall Profile?
Jul 29, 2011I have a question about wall profiles. I want to make a profile on a wall so I can make Zinc Panels on the wall that are 10" X 20". I've attached a picture of what I'm going for. I'd like it to have a 1/2" spacing between them and with a joint depth of 1" and I'd like to do this is the wall type so that I can use this wall in multiple places rather than having it model-in-place. Anyway I have made a profile that is 1" X 10" so that it can become my panel profile. But when I go to add it to the wall as a wall sweep as I have seen people do I get hung up on how to make it tile up the wall and also I don't understand how to make the profile so that it is 20" wide. I have a screen shot of where I'm editing this too. Below is the link of the site.
View 8 Replies View RelatedCorelDRAW Graphics Suite X5 :: Apply Color To Selected Objects Without Having To Search For Color In Color Palette
Mar 13, 2012Is there a way to apply a color to selected objects without having to search for the color in the color palette. So say if I am working with an image that has multiple colors but want to use only one of the colors in that image, is there a way to apply it without having to create or add it to the palette.
View 3 Replies View RelatedPhotoshop :: How To Sample Color From Image And Apply To Encore Menu Color Sets
Aug 6, 2013I'm about 3 months and many hours of tutorials into Premiere ProCC, Audition CC, and Encore CS6. Apparently the nifty dynamic links from PPro and Audition CS6 no longer work with encore, as encore was not upgraded to CC. So,
I want to sample color from an original Photoshop image, and create an Encore menu color set, so that my menu buttons, etc. are colored to match the main photo image in the menu. Is there an eyedropper kind of tool in Encore that would let me sample the color from the image, and then apply that to color swatches in the Encore button layers?
Photoshop :: Impossible To Synchronize Regulations Of Color / File Of Parameters Of Color Is Untraceable
Dec 4, 2012Error message in the opening of Photoshop CS6. " Impossible to synchronize the regulations of color, because the file of parameters of color is untraceable ". Computor with Vista SP2
View 1 Replies View RelatedPhotoshop Elements :: Could Not Use Color Replacement Tool - Only Works In Full Color Mode
Feb 19, 2013I have a PSD file open and I added a new layer via the copy command. I have added a Layer Mask to the new layer and I'm trying to use the Brush Tool with black forground to cover part of the new layer. I'm following an online tutorial step by step, but when I try to use the Brush Tool I get "could not use color replacement tool because it only works in full color mode". The Image>Mode is set to RGB.
View 1 Replies View RelatedPhotoshop Elements :: MS (Color Dialogue Box) Popping Up Instead Of (Adobe Color Picker) Inside PSE 10
Dec 9, 2012--Toolbox: The 2 columns of Tools on the left side of the Editor screen.
--Foreground Color & Background Color: The color filled squares at the bottom of the Toolbox.
--Color dialogue box: This is the pop-up that is labeled at the top with "Color". It shows 48 different color squares (6 rows by 8 columns); they are labeled "Basic colors:". Right below the "Basic colors:" array is another 16 empty squares (2 rows by 8 columns) to be filled with colors to be defined. There is a "Define Custom Colors>>" button when clicked opens up a color picker with HSB RGB stacked below the color field screen. See this link to the Microsoft "Color Dialogue Box", [URL]
--Adobe Color Picker: The interactive dialogue box with the color field screen to the left and the HSB RGB numbers stacked on the right side.
[URL]
The problem:In PSE 10, when using the Eyedropper Tool or clicking on the Foreground Color or the Background Color, the Microsoft Microsoft "Color Dialogue Box" pops up instead of the "Adobe Color Picker" dialogue box. This started about a month ago. I use Windows 7.
I want the "Adobe Color Picker" to pop up (like it used to) inside PSE 10.
Photoshop :: Use Color Checker As Reference To Correct Overall Image Color And Contrast
Nov 8, 2012I have a photo of a painting that was taken with Kodak color checker patches on one corner. It looks like I need to adjust the colors in Photoshop.
I want to use the color checker as a reference to correct the overall image color and contrast. However, I don't know how to use it as I have never worked with color checker patches before.
how to color correct the image on photoshop?
I am attaching a cropped sample image. The original image is in RGB. The colors on the Kodak patch as follows: Blue, Cyan, Gree, Yellow, Red, Magenta, White, 3/Color, Black.
Photoshop :: How To Make Meadow Take On Color Tones Of Color From Swatch Panel
Jan 2, 2013To create a special effect (but not TOO garish!) I'd like to change this brownish meadow so that it looks much more like one of the swatches from my color swatches panel.
Do I need to create a new adjustment layer, or are there other approaches? Below is a screen shot.
Photoshop Elements :: Make Document One Color And Type In Text Of Different Color?
Apr 5, 2013How does one make a document one color and type in text of a different color?
View 2 Replies View RelatedPhotoshop :: RGB 48bit Color Versus SRGB 24bit Color For Scanning Documents And Resolutions
Dec 30, 2012I have alot of paper that I want to reduce & eliminate, I have a bunch of certificates, magazine/newspaper clippings that I have from high school & college to scan & would like to know what color settings would be best.
I also have a bunch of brochures, other odd papers, receipts, & handwritten notes.
I am using an Epson perfection photo 4490 flatbed scanner, on a mac running lion 10.7.5.
I would also like to know what would be the best resolution to use.
I read a little about bit depth, & from what I gather, the human eye can only see so many colors, & going with bigger color depths is good where one has to do alot of editing.
most of these items are for records & archives, & maybe to be able to print from the scans, so I can throw out some of my paper.Also, when I scan in Adobe RGB, would it be best to use 48 bit depth to go with the fuller color? & when I use sRGB use 24 bit depth?
Photoshop :: CS4 - Color Picker Window Showing Different Color To What Displayed?
Jun 14, 2012if you look at the image attached the colours on the right are what the color picker is displaying and if I use that hex code thats the colour the web page displays, but if i fill in any element the colours circled on the left are shown in photoshop.
Why is the color picker window showing a different color to the whats displayed?
Photoshop :: How To Fix Color Picker To Work Across Different Color-managed Monitors
Apr 17, 2013I'm assuming this problem I'm having stems from having color-calibrated monitors, but let me know if I'm wrong!
To preface, this is the setup I have:
Windows 73 monitors as follows, all have individual color profiles calibrated using the Spyder 3Cintiq 12WX Dell U2410Dell 2409WFPPhotoshop CS6 - Proofed with Monitor RGB, and tested with color-managed and non-color-managed documents . I usually do most of my work on the Cintiq 12WX, but pull the Photoshop window to my main monitor to do large previews and some corrections. I noticed that the color picker wouldn't pick colors consistently depending on the monitor the Photoshop window is on.
Here are some video examples:
This is how the color picker works on my Dell U2410:
[URL]........
This is how it works on my Cintiq 12WX:
[URL].........
Main Question
I know the Cintiq's video capture makes the picture look more saturated than the Dell's, but it actually looks fine physically, which is okay. But notice how the Cintiq's colour picker doesn't pick a matching colour. It was actually happening the opposite way for a while (Dell was off, Cintiq was fine), but it magically swapped while I was trying to figure out what was going on.
Semi-related Question regarding Color Management
Color management has always been the elephant-in-the-room for me when I first tried to calibrate my monitors with a Spyder colourimeter years ago. My monitors looked great, but Photoshop's colors became unpredictable and I decided to abandon the idea of calibrating my monitors for years until recently. I decided to give it another chance and follow some tutorials and articles in an attempt to keep my colors consistent across Photoshop and web browsers, at least. I've been proofing against monitor color and exporting for web without an attached profile to keep pictures looking good on web browsers. However, pictures exported as such will look horrible when uploaded to Facebook. Uploading pictures with an attached color profile makes it look good on Facebook. This has forced me to export 2 versions of a picture, one with an attached color profile and one without, each time I want to share it across different platform. Is there no way to fix this issue?
Pictures viewed in Windows Photo Viewer are also off-color, but I think that's because it's not color managed... but that's a lesser concern.
Photoshop :: Replacing Object Color With Specific Swatch Of Color
Jun 10, 2013I have a colored object, and I have a specific swatch of color that I need to change the current color of the object to. The problem I'm having is that the specific color that I'm trying to apply to the object doesn't look integrated with the object itself, it just looks like I've applied a color film over it. It's milky-looking and there's not enough contrast. I've tried adjusting levels, using different blending modes, using the Match Color command ..I can't seem to keep the integrity of the color I'm applying to the object, while still keeping the integrity of the details of the object itself. How should I tackle this using multiple layers and blending modes, and so the new color looks integrated and believable?
View 8 Replies View RelatedPhotoshop :: Which Color Mode In CS4 Is Best To Use For 2-color Project / Grayscale Or CMYK
Mar 21, 2012The project is a photo montage. It was 4-color, now must become 2 colors. So I've changed each of the original 4-color photos (jpg and eps) into separate psd files (as grayscale/duotone/montage-and assigned it One pantone color)
In a new psd "montage" file, I plan to place each photo on its own layer, adjust tints, transparency, etc, to create one new montage/flattened.I'm not sure which color mode is best when setting up this new file, CMYK or grayscale?
Once the PS doc is done, the job will be saved as a PDF for 2-color printing.I want to insure the 2 pantone colors separate properly at press.
Photoshop :: Wrong Color Appears When Using Color Replacement Tool
Oct 17, 2013I'm using this tool in CS4 on an image with a transparent background.When I set the foreground color to R165 G165 B165 and apply, the resultant color on my image is R64 G64 B64.
View 4 Replies View RelatedPhotoshop :: Color-picker Selecting Background Color Instead Of Foreground?
May 19, 2012You know how when you're painting, you can hold ALT and it will pick a colour from the canvas? Well, for some reason, mine still picks up the colour but it sets it to the background colour instead of the foreground colour.
And when I actually select the colour picker tool, it will only select the background colour but when I hold Alt, it selects the foreground colour. Basically it's flipped where it's supposed to select.
Photoshop :: Change Foreign Or Background Color With Color Picker
Oct 17, 2013When I have any kind of layer, and I want to change the foreign or background color (with the color picker) I just cant. When I click on the foreign or background color it automatically selects the eyedropper tool, and I don't want this to happen.
View 1 Replies View RelatedPhotoshop :: Create Color Fields Of Main Color Automatically?
Jun 24, 2013I have many images files. For each picture, I need a color field of the main color, so the one that is most commonly seen.
This color should be saved as a new image as background.How can I do it in Photoshop, so this is done automatically.
Photoshop :: Color Switch To Black While Selecting Green Color
May 8, 2013Why when I use green for foreground color and go to Fill and use the option of Foreground color the selection is filled with black? Also why when I open a file with a green square, it also turns to black? And since I am asking questions, how do I get back the ability to get content and search within photoshop, instead of always being directed to Adobe online? I am using CS5.
View 3 Replies View RelatedPhotoshop :: How To Use Color Replace Tool To Change Color Of Sheet
May 3, 2012A while back I saw a video about using the video editing capabilities. In particular the video showed a car with a colored sheet over it and the in the video the sheet was either pulled off the car or the car moved out from under the sheet (I cant remember which). Then the video showed how to use the color replace tool to change the color of the sheet throughout the entire video.
View 2 Replies View RelatedPhotoshop :: Unable To Change Color Of Star With Replace Color
Aug 3, 2012I have a star that I would like in a specific color, but am having issues changing it with the replace color and/or color replacement tool. The image is small, but I am trying to have all the pixels. The color I want to use is Pantone solid uncoated 655 U. This is the image I am trying to change.
View 4 Replies View RelatedPhotoshop :: Color Doesn't Work - Fill Sun With Proper Color (red)?
Aug 5, 2013I took a photo of the sunrise. The sun was very "red" from forest fire smoke. But when I looked at the photo later the sun had lost its "red" (due to the brightness of the sun). restore the sun color as I saw it?
Below is the photo I want changed and the next photo (not mine) is approx. the color I saw the sun as (perhaps a little redder). I want "my" sun filled with that color.
Photoshop :: Transform A 4-color Picture Into A 2-color One At Reasonably Good Quality?
Sep 8, 2012Is there anyway to transform a 4-color picture into a 2-color one at reasonably good quality?
The problem I met is at the galley.I could, or migh, only be able to get a 2-color printer at reasonably good price.
The original design is 4-color. But the actual detail is not very important.They are book covers, which only need to protect the book.
Photoshop :: Transforming Water Color Image To Pantone Color
Jan 25, 2006I am doing a thermography project for a wedding in which the printer will only do two-color processing. the text will be black and a cherry blossom jpeg is illustrated in watercolor-y pinks. all will be raised printing. how do i transform the watercolor-y pinks to one pantone pink without losing the brush stroke quality of the image? do i select & replace color pixels varying the translucency of one pink pantone color? is there an easier way? i am using photoshop cs on a mac.
View 4 Replies View RelatedPhotoshop :: Creating A Color Table For Print, Color Standards
Mar 20, 2007I was wondering what is the best way to save a photoshop file such as a business card or stationary labels so they "KEEP" their color you see on screen.
I am already building in CMYK mode. My Client has a nice gray scale scheme but I am worried that the print shop will mess up the colors.
How do I create a custom set of colors and adhere to that scheme throughout the clients stationary and media.
ie. Cards, Labels, Signs, etc.
Is there an option to print a color scale along with the image, sorta like when you calibrate your printer?
Photoshop :: Calculate Percentage Of A Color!! (know The Total Amount Of A Certain Color)
Nov 22, 2005How do you know the total amount of a certain color from an image (in percent%)?
Is there a way to calculate it?
Let's say I have an image with a white background and a red figure.
If the whole painting is 100%, what's the percentage of the white background
or the red figure?
I need to know how to calculate this (accurate)
I make paintings with only 2 colors (a 'background color' and the 'main color')
To put an objective price on my paintings I decided to calculate the amount
of 'main color' (or background color) and base my prices on this information.
This is the only way I could price my art fairly an objective.