I'm using PhotoshopCS2 education version on a Windows XP computer. When I open up the channel mixer window, there is no option for channel mixer presets. How can I load presets into Photoshop? Or is this feature only available on later versions?
View 1 Replies
I have just installed.
Photoshop CS4 Extended as part of the master suite.
I have also CS3 on the same PC.
Now the channel mixer doesn't show the sliders for tint (hue and saturation); the same happens on the B & W adjustment window.
I try to run CS3 (shortcuts or the program itself), CS4 comes up instead.
With these settings, I think that I should get the same result with the red channel of the original image ... isn't it? But, it is different from the red channel .
View 4 Replies View RelatedWhen I'm doing RGB retouch I'm often converting the image to CMYK just to use the Channel Mixer in that mode. I can never seem to get the hang of channel mixer in RGB to the same result, I guess I just understand CMYK plates better.
Is there any way of seeing the CMYK slider in RGB mode?
I have converted the same image from color to black and white using the channel mixer and using the black and white adjustment, and there appears to be a slight, almost imperceptible, loss of sharpness in the image converted with the channel mixer. Is there any research showing that a loss of sharpness will, in fact, occur when using using channel mixer when converting color images to black and white?
View 2 Replies View RelatedWhen I convert a picture in BW from a channel (for ex : green channel) and compare it with the result from the Channel Mixer technique (Monochrome, R : 0%, G : 100%, B : 0%), there's a little difference.
View 3 Replies View RelatedWIndows 7 x64 | PS CS6. Just now while attempting to edit a Channel Mixer adjustment layer's creation dialogue settings, about 15 browser windows (not tabs but individual windows) trying to load Adobe docs all popped opened simultaneously.Killed Firefox's process and went back to PS.Every time I went back to PS though, it would happen again, when I clicked in the Channel Mixer settings.
Got out of the loop by mashing the ESC button as I switched back to PS, which successfully killed the Channel Mixer dialogue.I've seen this behavior in PS for about 4 versions now, but never this severe. How dysfunctional.
I'm comparing the CS5 & CS6 mixer brush, with moist, light mix, right now...At first I wondered why the CS6 mixer brush was slower, until I realized that it looks like the actual brush stroke in CS6 is more advanced. The CS6 stroke looks like it's calculating the overlapping brush strokes & it's interaction with the texture more accurately to real life.
I haven't read any articles on improvements to the CS6 mixer brush. Has it actually improved or are my settings just different in CS6 from CS5? since I'll probably need to work with "Sample All Layers" unchecked when working with the CS6 mixer brush.
When trying to print in Elements 11, after clicking "Print/Page Setup/Presets/Show Presets", the box freezes. Clicking Cancel or OK does not work. I then have to Force Quit Elements to clear it. Apple say that it is a problem with Elements. Using the same procedure in other applications, clicking Cancel or OK does work.
View 8 Replies View RelatedI am a screen printer and I print my separations from Photoshop. I routinely work with multi channel files or RGB files with additional spot color channels. I have created actions to place my registration marks, re-size images, etc to get ready to print but I manually have to create the text labels for each screen if they are missing from the original artwork.
The files I work with have channels named as "Base White, Red, Green, 284 Blue" etc indicating the ink color. What i would like to be able to do is click an action that would copy the text from the channel name and insert it into a separate or each/all channels near the top of the file so that when I print each positive it has a corresponding label for ink color.
I am not sure if this is even possible, and I am limited on my knowledge when it comes to actions and have pretty much got lucky in the past getting them to do what I want without unnecessary steps.
On my registration target action it creates a new channel with each individual reg mark then combines them into one separate channel in which I just copy the contents and select all the ink channels and fill with black to make them appear, i'm happy with the steps it takes as it isn't too much trouble and if this could do the same with labels I would be happy with that.
I am having trouble getting my presets to show up under presets on the left hand side of the screen. They are still in develop presets but there not showing up and Ive tried deleting them and adding them again then closing out of lightroom 4 and going back in but I can not seem to get them to show up again. I must have hit something but there not showing up again
View 2 Replies View RelatedJust made sure updates for the video card and all the hardware were current and still getting this problem where when I go to adjust a channel of video a random frame from the below channel will insert itself into the clip that I just moved as if it was married into the source footage.
Adobe Premiere Pro
Running an nVidia 660 with 331 drivers installed
Win7 64 bit ultimate
How can I get the channel subassembly to attach to the assembly insertion point at the channel flowline marker? I need the flowline to follow my profile elevations.
View 4 Replies View RelatedI have recenty had to reinstall all my software, and manged to find most of my old Lightroom settings in the Lightroom Presets folder (inside the Appdata folder on a PC) but I seem to have lost my custom tone curves.
Do you know which folder they should be in (indise the Lightroom Presets folder)
I STILL don't understand why there are TWO comminty forums for Lightroom;
In CS6, I am trying to apply color to the Canvas with the Mixer Brush, though it is not working. I am using Wet, Heavy, Mix brush and I select Blue as my foreground color, the color is showing in the toolbox and up above in the options bar, though when I paint it just seems to smudge the colors on the canvas. What is wrong with my settings?.
View 3 Replies View RelatedRunning Photoshop CC 64, Win7 x64 on an i7-3820 based machine with 32GB of ram, 256GB SSD, several 2TB drives and a GeForce GTX 650 Ti 1GB 16X video card.Running the latest non-beta WHQL drivers for the video card,
i have photoshop set to: use graphics acceleration, drawing mode advanced, opencl. When I'm using the mixer brush and with the brush set to sample all layers, depending on brush size, I experience a large lag in rendering. When doing this, my CPU usage is around 10% and disk usage is also low so I'm assuming the graphics card is the bottleneck here.
Images are from a 21MP canon 5dMK II, 8 bit files. I can replicate the problem with a single background layer and mixing/smudging on a 2nd transparent layer set to use all layers.
I'm a user of CS5, on a MacPro.
I was so disappointed with the amazing slow response when trying to use the Mixer Brushes; fine when using small files, suitable for web, but when working with larger files intended for large printing, it was painful!! Have the people at Adobe sorted the problem out with CS6?
The CS6 mixer brush stops painting and turns into a hand icon, with only the index finger out, when I paint near the top left of my screen. It's about 3 inches from the left and 2 inches from the top.
I don't have this problem in CS5.5/CS5.1 or CS5 . what the hand icon with only index finger out is for? It's not the move tool icon. I should also add that I'm using Win7 and a Cintiq. and I should add that the standard brushes don't have this problem in CS6.
why I'm having trouble with VSX5 Pro's "Sound Mixer?" It isn't working, and I don't know if my issue is one that has been reported already, or not. In my timeline (under 'voice track') I have an audio file which I separated from the main video file. The main video file is now 'muted' so that only my voice track plays the sounds. Note: I copied the same voice track and pasted 3 copies of it only to lengthen the overall playtime, but they are each on the same voice track.
The problem I'm having is that the volume adjustment settings don't work. After selecting the first segment on my voice track, I then move the slider up to maximum volume (from level 0 to 12), and then I right-click on it to save it as "default," but it ALWAYS jumps back to volume level zero (0)! It does the same thing even if I don't "right-click" and save it. The setting never stays where I want it to. What else can I do to increase the volume of the sounds on my 3 segments in my voice track, and have them stay at level 12?
EDITED: Also, is there some way I can save/export my "voice track" to an external sound file and/or convert it into a different sound format? I haven't seen a way to do that.
I've created animation mixer clips for edit animations that have a bug of time and I want to extended and the time line was cleared and now I wants to put the animations again in the time line to export, how do that?
View 1 Replies View RelatedI'm contemplating purchasing a Mackie MCU to automate some of the volume edits I have to make using 5 tracks in the Audio Clip Mixer over 80 hours of video. I've tried to contact Adobe support, but they are about as cluless as a bag of hammers. When I asked if the clip mixer works with a control surface (after 4 calls and 4 different agents) I was told no. Which is total BS as there is toggle in the clip mixer called "Toggle Control Surface Clip Mixer Mode". They read from scripts and have no clue what they are talking about. I guess I should not be surprised as its an outsourced call center staffed with drones who have never even used the software, much less in production! Adobe you should be ashamed of your support, it's appauling! (BTW I own an online Magazine in the 3d industry and will be writting an article about your appauling support soon)
Anyway, onto my specific questions:
1) The Mackie MCU has overlay cards for button mappings for many different apps, but PP is not one of them. What functionaliy is mapped to the control surface specially from PP and the clipmixer?
2) Is there a way to group channels so that keyframes can be written to multiple clips at the same time by using one fader?
3) In the clip mixer there is a keyframe toggle, does such a toggle translate to the control surface?
4) Sometimes I want to manually keyframe, rather thanan make adjustments while the playhead is moving, so I will simply click the fader slider to write a keyframe, manually move the playhead and then adjust the fader to write the subsequent keyframes. As faders on a control surface can not be pushed like a button, is there a way to generate a keyframe from the control surface?
5) Are there any known limitations using the control surface vs the software for both the clip and track mixers?
When I am in the sound mixer and select for instance the music track, and want to drag the note symbol down toward the surround speakers, I have to hold the note with the mouse all the way of the entire music clip, otherwise, the symbol note returns slowly back to the center.
Is there any way to keep the note symbol fixed in the desire position without holding the mouse all the time of the entire music clip? I am using VS4.
I have animated a biped with 10 bip clips in a Transition Track. I need to insert another clip inside of the set of clips. Nothing worked in trying different things in MM, and I couldn't find any tutorials that are comprehensive. Is there a way to insert a clip inside of a mix rather than only at the end?
View 2 Replies View RelatedI am animating with mocap and biped in Max. A character that is walking, the mocap I have is a straight line. Is there a way in the mixer to have the characters walk curve without having a clip of a curved walk?
View 1 Replies View RelatedI lost my PDF Presets (CS6) so when I try to save to a PDF format, the std presets are not there. How do I reload them? I previously created a custom preset when building a book for Create Space and that is the only preset there - & I have not used this since.
View 2 Replies View RelatedI'm setting up a brand new iMac with CS5.5. I had just gotten vaguely familiar with CS5 on my laptop, and I was hoping to simply copy and paste my Keyboard Shortcuts, Preferences, and Workspace files into the same folders on the new computer. Alas, the file setups are somewhat different.
What I can't figure out is WHERE these programs actually save these types of Presets to. They seem to be able to access my "old" files from if I drop them into certain folders through the Applications menu (see list below) but when I try to save a new Workspace or Keyboard Shortcut list, these files seem to disappear into a magical hidden folder that I cannot find.
To reiterate - below are the only locations for shortcuts/workspaces/preferences that I can find (via the Applications folder) and while the programs will read my presets from them, but they are not saving new presets to these locations:
Keyboard Shortcuts
PS - will read from, but not save to, Applications/Adobe Photoshop CS5.5/Locales/en_US/Support Files/Shortcuts/Mac
AI - will also read from, but not save to, Applications/Adobe Photoshop CS5.5/Locales/en_US/Support Files/Shortcuts/Mac
ID - will also read from, but not save to, Applications/Adobe Photoshop CS5.5/Locales/en_US/Support Files/Shortcuts/Mac
Workspaces
PS - will read from, but not save to, Applications/Adobe Photoshop CS5.5/Locales/en_US/Additional Presets/Mac/Workspaces
AI - will read from, but not save to, Applications/Adobe Illustrator CS5.5/Presets/en_US/Workspaces
ID - will also read from, but not save to, Applications/Adobe InDesign CS5.5/Presets/InDesign Workspaces/en_US
None of my CS2 presets will load in CS3. I would like to use CS3 with its new features but I would have to make all new brushes and actions, and I have thousands of each. Is there any way to get CS3 to load them?
Edit: Just a note, they don't even show up in the load dialog. Neither do a few folders (Such as ones under "C:Program FilesAdobe" where the only one that appears to be in there is "Adobe Photoshop CS3" when there is in fact about 10 other folders)
Can a channel (Alpha...) be converted to a layer in the same
document?
I would like to manipulate a channel from Calculations with
Photoshop tools (filters etc.)
I saved some presets in camera raw 4.6. Now I use ACR 7.1 an the presets don't work like they did on 4.6. Is it possible to convert them?
View 2 Replies View RelatedHow do I transfer my Presets from CS5 to my just installed CS6?
View 4 Replies View RelatedI created some gradients that I now want to delete. They show up at the very bottom of my photoshop gradients dropdown menu separated from the other presets by a line. I have tried to find those files to delete them and I cannot get to them from my Finder window. I can access the preset folder from Application--CS5.1--presets but the other folder where Photoshop saved these gradients is nowhere to be found.
View 1 Replies View Related
