When I convert a picture in BW from a channel (for ex : green channel) and compare it with the result from the Channel Mixer technique (Monochrome, R : 0%, G : 100%, B : 0%), there's a little difference.
View 3 RepliesI have converted the same image from color to black and white using the channel mixer and using the black and white adjustment, and there appears to be a slight, almost imperceptible, loss of sharpness in the image converted with the channel mixer. Is there any research showing that a loss of sharpness will, in fact, occur when using using channel mixer when converting color images to black and white?
View 2 Replies View RelatedSomehow I've managed to change the default When I cmd click on a channel it now selects the black instead of the white
View 1 Replies View RelatedI have just installed.
Photoshop CS4 Extended as part of the master suite.
I have also CS3 on the same PC.
Now the channel mixer doesn't show the sliders for tint (hue and saturation); the same happens on the B & W adjustment window.
I try to run CS3 (shortcuts or the program itself), CS4 comes up instead.
I want to change in CS6 the thumbnails for the red, green, and blue channels from color to black and white. How is this done?
View 1 Replies View RelatedWith these settings, I think that I should get the same result with the red channel of the original image ... isn't it? But, it is different from the red channel .
View 4 Replies View RelatedI'm using PhotoshopCS2 education version on a Windows XP computer. When I open up the channel mixer window, there is no option for channel mixer presets. How can I load presets into Photoshop? Or is this feature only available on later versions?
View 1 Replies View RelatedWhen I'm doing RGB retouch I'm often converting the image to CMYK just to use the Channel Mixer in that mode. I can never seem to get the hang of channel mixer in RGB to the same result, I guess I just understand CMYK plates better.
Â
Is there any way of seeing the CMYK slider in RGB mode?
I was simply wondering the best means in Paint.Net to use a black and white image and use it as the alpha channel of my image, with white being opaque and black being fully transparent. I looked through the plugins on the site and didn't see anything that seemed to resemble what I was after.
View 2 Replies View RelatedI have a sketched out map of a parking lot that I want to convert to a true black and white.
View 3 Replies View RelatedI'm trying to make a texture for a model in a video game, and I want some of it to be transparent. This is done by editing a text file that tells the model to use the textures alpha channel. things in the alpha channel that are white are transparent and things that are black aren't.
But I don't really know how to edit the textures alpha. Here is a video I've seen that explains how to make one in photoshop: [URL]......
How to do exactly what he does in gimp? whenever i duplicate one of the rgb layers, it isn't black and white like it is in ps. i'm also not sure how to have it turn into the alpha.
WIndows 7 x64Â Â |Â Â PS CS6. Just now while attempting to edit a Channel Mixer adjustment layer's creation dialogue settings, about 15 browser windows (not tabs but individual windows) trying to load Adobe docs all popped opened simultaneously.Killed Firefox's process and went back to PS.Every time I went back to PS though, it would happen again, when I clicked in the Channel Mixer settings.
Â
Got out of the loop by mashing the ESC button as I switched back to PS, which successfully killed the Channel Mixer dialogue.I've seen this behavior in PS for about 4 versions now, but never this severe. How dysfunctional.
After converting a color photo to black and white, the image that prints out has a sepia tone to it. The image looks black and white on my screen and when I print a black and white image directly from the internet, it prints out in good black and white mode. What adjustment is available to get rid of this sepia tone?
View 1 Replies View RelatedI am trying to convert an object's color from black to white. Like changing the color of a killer whale's black coat to sumthin like green or blue.
View 1 Replies View RelatedI wanted to make a decal to place on the acrylic window of my PC. I found the perfect picture, which is in black and white. For it to look right though, I need to switch the black to white, and vice versa. Is there a way with Photoshop to automatically switch these, instead of having to manually switch them.
View 3 Replies View RelatedI apparently changed something in CS3.
I frequently change the mode of my images from RGB to LaB to do various tasks. Now when
I convert from RGB to LaB the LaB channel is black instead of displaying the image in LaB color. For the life of me I can't see what I changed.
I'm running CS2 on an HP Pavilion with an Intel Pentium D CPU 2.80 GHz 3 G RAM on a 32 bit Vista OS. Last time I used this function it was fine but now, every time I try to create a new channel it's black, not transparent, not white but black. Whatever's pasted into it looks like an X-Ray. What have I turned on?
View 17 Replies View RelatedI scanned a black and white print in color and am trying to replace all the black with dark green. Been trying for hours in elements 9. This is all so hard. Just to ask this question I have typed it into 3 different screens, set screenname, many other hurdles.
View 3 Replies View Relatedfollowing image shows up fine on WIndows machines, but on Macs it shows up as balck instead of navy, why? I have tried svaing in PDF, JPG, PNG, and PDF nwith Mac color profiles... what is going on? PS, the navy is #0d1125
View 3 Replies View RelatedI have a multilayered psd file. All layers should remain opaque except the black to white gradient layer where I need the white to be transparent. So that when I place the final psd on top of a block of solid colour in Indesign the gradient shows the background colour through where the black fades off.
View 4 Replies View RelatedCS5, OS 10.6.6, 2.93 GHz Quad Core Intel Xeon
Making a mask from a selection the not-selected area is 95% black, not 100%.
So the not-selected area IS affected if the mask is applied, say using an adjustment layer.
Is there a preference somewhere, or a key command that was inadvertently applied?
I'm comparing the CS5 & CS6 mixer brush, with moist, light mix, right now...At first I wondered why the CS6 mixer brush was slower, until I realized that it looks like the actual brush stroke in CS6 is more advanced. The CS6 stroke looks like it's calculating the overlapping brush strokes & it's interaction with the texture more accurately to real life.
Â
I haven't read any articles on improvements to the CS6 mixer brush. Has it actually improved or are my settings just different in CS6 from CS5? since I'll probably need to work with "Sample All Layers" unchecked when working with the CS6 mixer brush.
I'm using PSE8. I was using Filter>Render>Clouds and it was working for me. I must have done something because the clouds that are rendered are black & white not Blue and white. My photo is of course a color image. How I can correct this or what I need to do to get back to the default setting that will render blue & white instead of black and white?
View 2 Replies View RelatedI would like to draw parts in 3d view which look very basic, i.e. out of a book.
Example:
white block with black lines so you can see it is 3d.background should also be white.
How do i set autocad (2012/2013) to do this. I would like the model space to be the same and not just for printing.
In photoshop there is a tab beside the layers tab, that allows you to add a shaded alpha channel to a .dds file.
I need to add a black alpha channel to a .dds file.
I've tried every alpha pluggin I can find but cannot replicate this effect.
And if I open a .dds file created in photoshop with a black alpha channel it is completely invisible in paint.net.
Why is it completely invisible in paint.net but not in photoshop?
How can I add a black alpha channel to a .dds file in paint.net?
png texture with alpha channel but the transparency seems to be white.
How do I let the transparency in the png texture look through to the background?(alpha blend)
I should have spoke up sooner because I thought this would get fixed pretty quickly but I just upgraded to CS6 and it's still broken. I use Photoshop to generate color separations for screen printing. We do simulated spot process which means we print the prodomient colors of the image rather than gambling that CMYK will work. We print white because garments are often any color you can imagine. So I use the DCS.eps format alot. I place this linked in Illustrator. Up untill CS3 this worked fine. I skipped 4, but upgraded to 5. Five doesn't display the white channel. (These files are Multichannel mode, each channel is a Spot channel. saved as dcs/eps) I have not tried output. It may print fine.
The thing is I end up with a client perched on my shoulder like a buzzard and if the white parts of the design or the white channel/screen isn't their to support the top/upper colors I look like I don't know what I'm doing, or I left the white out, etc. I've been in both offset printing and screen printing and T&T (trinkets and trash) for a long time. Messing up paper is one thing. Messing up an Under Armor or Nike or you name it garment is a whole different ballgame so they are pretty tense when it comes to what they see. I already have to explain that it looks pixelated and rough because it's an 8 bit preview but will print sharp.
bdpnp1.png
Basically a CAD program I use only exports PNG files. The CAD program can export in black and white and in color. The color PNG files open fine in CorelDraw. The black and white PNG files just show up as a black filled box.
I attached an example PNG file. Example PNG
I have an image where i chopped seperate parts of different pictures, desaturated all 4, but on the one, there seems to be more "grays" in the black and white photo... i want the grays to be more black. Messing with the brightness and contrast isnt doing it...
View 9 Replies View RelatedMy problem is that I am converting RGB native images to CMYK and my Key (Black) comes out rich, contains equal levels of CMY and K, instead of true black, only k.
Currently my way around this is to do the standard convert to profile CMYK and with my path selected to the section I would like to be true black simply turn off all CM and Y channels and re-save the image but this is a little labor intensive.
Is there a way that I can go straight from RGB to CMYK and achieve true black without alteration?
I'm attempting to render a series of images in the cloud and my plan is to take these images into Photoshop so that I can apply a background from an image I possess.
Â
To do this I need the background to be a plain white background, export as a TIFF or PNG, then add an alpha channel in Photoshop. The problem is that whatever settings I apply in Revit, the cloud rendering always gives me the standard grey / blue horizon background. I have changed the render settings using the render setup, through the view properties, through the graphic display, still no joy....