I have cs5 and also cs4 and a codec, a quick time player. when I try to open a video file through import video frames to layers this comes up.I tried so many things, but nothing works, any resolutions that actually WORK?
View 4 RepliesVOB is listed as a supported video file but it does not open via drag and drop or importing via video frames to layers. I get the message, "could not complete your request because video file could not be opened". Other supported video formats work. I am running CS6 64 bit on Windows. Any other way besides converting the VOB files?
View 7 Replies View Relatedwhy can't i open video file in pts cs5?i've already installed quick time but when i open video file, it appeared this.
View 3 Replies View RelatedHow do I load an .mp4 file into Photoshop CS6 from Bridge? I followed the video tutorial from Adobe - [URL]...- which says to load them into Photoshop as layers and I keep getting an error message in Photoshop that says I have to select 2 videos. So I selected 2 videos and still get the same error. I don't know what else to do.
I've also tried from Bridge to select the .mp4 file then go to File > Open with > Photoshop CS6 and I get the following error Could not complete your request because it is not the right kind of document.
I recently upgraded to CS6 and am having a problem with Photoshop.
In my previous version (CS5.1) I could drag a single frame of video from a .mov file and drop it onto my Photoshop icon and Photoshop would open that frame as new document. But now in CS6 when I try to do this I get the following error: "Could not complete your request because Photoshop does not recognize this type of file"
Why won't this work now in CS6?
I'm on a Mac Pro, 12-core Intel with 24 gig of ram. Everything updated and licensed.
when i try to open a video in photoshop cc, error message says can not play video in this version of windows 7.
View 1 Replies View RelatedI have just unstakked CS4, but my video cardNividia 7300 GT ONLY HAS 250 mb OF MEMORY. There are some functions of GL functions (3D) that cannot be used. Also, occasionally Photoshop shuts off the enhanced GPU functions and most important, even when it is in use there is NOT the smooth zooming from increasing or decreasing the size of the image.
I realize I should be using 512 MB on a video card. Adobe has a listing of cards that work with this new function but their prices anfd functions vary greatly. I will NOT be using 3D functions for graphics and use the computer for gaming. This is mainly for the new advanced functions in Photoshop.
I know I need 512 MB and open GL 2.0, but not the most advanced and expensive card. Any choices between nividia or ATI for CS4
video layer on Adobe PhotoShop CS4 .. Now when i open video layer on Photoshop , the layer is WHITE . SO WHITE i mean WHITE no picture just white blank on the background.I can open video layer without any error message but there is no video , there is just a white blank on the background .
View 2 Replies View RelatedTrying to edit video but Photoshop cs6 wont open the VOB files. I tried to change the extension to AVI and then drag it in. It works but it's distorted.
View 8 Replies View RelatedI been using the CS6 extended 30 day trial, still have 13 days. left. I used to open the video frames for (gif) sas avi files with ease. All of a sudden I couldn't open any video frames anymore, why is that? They used to be opened with ease. Now when I clicked import video frames to layers it always comes back to the message 'cannot open video frames to layers because the file cannot be opened'. It all worked with the same file before so why didn't it work now?
View 2 Replies View RelatedIs there a way to open a Photoshop "video" project in After Effects? I have someone painting on video but I need to tweak it in AE. I can import it but it sees just the first frame and makes it a still image for the length of the comp.
Also, I am only seeing "Photoshop Sequence" and "h.264 Quicktime" as options for video export from PS. I have all the flavors of Quicktime when rendering from AE (ProRes HQ), etc. Couldn't PS do the same?
When I first started using PSCS4, I was using a nVidia gs7800 card and with it open GL was flaky so I changed to an nVidia GeForece 9500 GT w/512 RAM )claiming open GL 3.0) and then open GL was stable. With the upgrade to 11.01 and the latest nVidia drivers for my card, PSCS4 now says I have no open GL it can use and I should either change my video card and/or update its software. What gives and, more important, how can I get get PS to use the open GL I have?
View 8 Replies View RelatedAdobe accepts only NVIDIA and ATI series of video cards. I just bought a Sony laptop with a different video card (INDVID-001637-64) with 1.8 GB onboard RAM and with Open GL capabilities but PS CS4 extended 64bit does not recognize the card. Is there a work-around to get PS to recognize this card or am I just not going to be able to use the Open GL for PS. I have been to Sony Vaio to see if there are any other possibilities but can't find any updates that work on my particular computer. I am running a Windows Home Premium Vista, 64 bit system with 4 GB of RAM so I am sure all of that is OK. I just don't know where else to go for information except back to where I purchased the computer. Maybe replace the video board if possible. Or maybe Open GL just isn't worth going to the trouble. Seems like that might be the case also according to some of the discussion here.
View 2 Replies View RelatedCan not open .3gp files in Photoshop Elements 11.
Using google chrome.
Also can't get to Adobe Fash Player.
I was using photoshop cs5 and am currently on a trail of CC, everything else is working fine, just File>export>render video takes along time for the dialog box to appear, which was not the case in cs5 (almost instatly opens).
Any settings I can change to speed this up? Im using Windows 7 32bit.
I have a video clip that I have edited, and once it finishes exporting, I cannot open it in any video playing application. Upon checking the file's Properites, it says that it is a 24 byte file... this can't be right. In the Export Settings window it says that it's several gigabytes!
I'm using a custom built PC, running the most up-to-date version of Windows 8. I have a quad-core Intel Ivy Bridge Processor, AMD HD Radeon 7770 GPU, 8 GB of 1600 MHz RAM, a 256 GB SSD running the OS and frequently used applications, and a 1 TB HDD. I am running Adobe Premiere Pro CS6 and it is completely up to date.
I have been digitally converting old VHS, 8mm, and miniDV tapes. I have a digtial converter that has Composite ports and an S-Video port on it. It connects to the computer via USB. I have a program called Debut Video Capture that records the video and saves it as an uncompressed .mp4 video file. Premiere Pro also has another issue where the audio and video are always out of sync because it can't seem to handle videos with variable framerates, so, I open the videos in Quicktime 7 Pro, and save them as a Reference Movie—This makes it so the videos are at a constant framerate. I take these files and import them into Premiere Pro. My sequence is DV - NTSC Standard 48kHz (the videos are all in an old 4:3 format). I'll drop the clips into the timeline and edit them, edit out the blue screens and splice different clips and such, lower the volume, and slightly increase the Scale in the Video Effects.
When everything is done... I'll open up the Export Settings.
I set the Format to H.264 and Preset to NTSC DV or NTSC DV Widescreen depending on the ratio of the video. Some of the videos are very long (1 Hour or longer... one video is almost 4 hours long). I will go down to the Bitrate Settings and change the Bitrate Encoding to CBR, and set the Target Bitrate to a reasonably high number. I try to have a minimum of 10 Mbps, or if the video isn't that large, I'll set it to 14. If the Estimated File Size is over like 3 GB (I'm not sure of the number, but it works for these long videos when they're under like 3 GB). If the videos go over, they'll encode for an hour or longer and when it's done, it will save and appear as a 24 byte file.
The only thing I've got is to make the Target Bitrate very small, that's the only way the videos will encode, but then the quality degrades...
I have a Fujifilm HS20EXR folder which contains video.Each time I select the folder, LR5 (Mac ML) crashes.
View 3 Replies View RelatedDoes Premiere Pro CS6 support Open QL video cards in Windows. I am looking at the AMD Fire pro w500 as I want to speed up rendering of Magic Bullet Looks, Colorist and Mojo?
View 2 Replies View RelatedPlaying a video will cause Lightroom 4 to crash in Windows 7. It seems to be correlated with several videos open in the grid.
View 4 Replies View RelatedI was trying to 'create a video file' when I received this message, 'Ulead VideoStudio [2000:1:1] Failed to open the MPEG encoder.
I've made countless movies and this is the first time I'm having this problem. Maybe I had it in 2008, but I've just turned 70 and remembering what I did then is a thing of the past!
Error message:
"Failed to open MPEG encoder".
I'm using Ulead VideoStudio 11+ and when I try to render a completed video to a file I receive this error message. The video is a little large, one hour fourteen minutes, so I cut it in half, saving it under a different name and it still gave me the same error message. However, if I render a very small clip then it renders as it's suppose to.
I've never had this trouble before. I reloaded the software for 11+ but that didn't work.
Video will not play properly [audio plays well video hangs ] in Adobe Photoshop CS6 running on a Win7-64 machine equipment with a quad-core processor. Video plays properly in Lightroom 4 and Bridge CS6.
View 6 Replies View RelatedI recently purchased Video Studio Pro X3 - and after going through the knowledge base and product read me, I have been unable to find an answer to the following problem I have:
PROBLEM:
I have a number of videos (HD 1080p) that I have recorded. Each video is on average 50 minutes in length - what I want to do it to be able to do is to slice this video into 10 x 5 minute videos (based on topics discussed in the video), (so essentially clip the video into these segments and edit each one) and then when producing the video file - actually create 10 separate video files (all with editing in place) instead of one single large file.
As far as I have been able to work out, I need to go through the whole file, clip relevant sections, edit them, and then save project. I then need to go trim the saved file 10 times, to extract each time the single 5 minute video I want to create. This is a fairly manual and time consuming process, hence my hope that I can create 10 files based on the clips I have made in the larger 50 minute file in one go.
as I have 30 videos to edit, so looking for ways to save time!
I am trying to "erase" extra video and show only 1 of the moving objects in the video .on an athletic field we are trying to show only the movements of 1 player...is it possible to "delete all of the other players movements and just show one player and then overlay that video on the empty field?
View 3 Replies View Relatedwhen I upload a video to You Tube, I get a warning message that my video and audio are out of synch. Once uploaded, the video plays just fine, looks great. But I don't know why I get the warning when I upload. Video clip and audio track are the same length.
View 1 Replies View RelatedI have a LIVE show recorded and I want to add Video Filters in various places within a single 4 minute video. Do I need to cut up my video to segments to add filters too or can I apply them to different spots in a single video?
View 5 Replies View RelatedIs it possible to import a digital video sequence into photoshop and convert it into individual frames, so that each frame can be manipulated individually (drawn into, coloured etc) and then reform the individual frames into a video file for export toAfter Effects, Premier Pro or Avid?
View 3 Replies View RelatedWhen press "open" the "open"-window dosn't open. Insted it open a comandpromt by the cursor that promt me to enter full search-way and name on the file I want to open.
What can i do to get the "open"-window?
I have started a new video project with a resolution of 1920 x 1080 in Photoshop CS6with a pixel aspect ratio set to square.. In the project I add a video to the timeline. The source video was created in QuickTime and exported at a 1920 x 1080 resolution MOV file. I have check both the source clip at the canvas siye and have confirmed that both are 1920 x 1080. However, when I import the video it takes up less than the entire frame. It appears that the video is being scaled down so that there is some white space to the right and below the video clip. See the image below.
In the past I have been able to import 1920x1080 video to a 1920x1080 project without a problem. I have 4 or 5 examples that have worked well.
Why doesn't the filmstrip open when I attempt to open multiple photos in camera row? I'm using CS4.
View 4 Replies View RelatedWindows Explorer set to open image files with PSE11, but when I double click on image in WE it launches PSE11, but I then need to click on Open tab in PSE11 to get it into work window. PSE10 did not have this problem
View 1 Replies View Related