thought CS5 was bad, but brushing with CS6 all brush strokes are very, very slow. If I make a brush stoke I have literally have to put my hand on my chin and wait for the brush to catch up. I cannot work like this. what to do to speed up the brushes? Forget about adding anything else to Photoshop, work on speeding up exisiting functions.
Â
Photoshop CS6, 13x 64Bit Model Name:Mac Pro Model Identifier:MacPro3,1 Processor Name:Quad-Core Intel Xeon Processor Speed:2.8 GHz Number Of Processors:2 Total Number Of Cores:8 L2 Cache (per processor):12 MB Memory:10 GB Bus Speed:1.6 GHz Boot ROM Version:MP31.006C.B05ATI Radeon HD 2600 XT:
Â
 Chipset Model:   ATI Radeon HD 2600
 Type:   GPU
 Bus:   PCIe
 Slot:   Slot-1
I work as a graphic designer and illustrator. As such, most of what I do with Photoshop is drawing, using my Wacom tablet and the brush. So I purchased the cloud services a few days ago to be up to speed and have the newest updates and everything.But when I started working with CS6 64bit I noticed how after some minutes working on a file there's just an INCREDIBLE lag on the brush. (usually if I beforehand do several zooms in and out and skip through the history) But I don't mean a little lag, like if I use a special brush with special attributes and it's really huge. I use the standart round brush, not even that big in diameter, (5px) draw, and have to wait several seconds for a simple line to materialize.It's like working in slow motion. Â I tried drawing without the tablet to make sure it's got nothing to do with the Wacom Plugin, but no. Even if I use the mouse, it's like this. Â It doesn't matter if I restart the system and photoshop just before. Some files I open, and it's lagtime.So now I have to use PS CS6 32bit, because there it's possible to work without the lag. But for some reason the programm crashes from time to time. Â These are my systems specifics:
Intel Xeon CPU E31225 3.10GHz 3.10 GHz 8 GB RAM 64 Bit System
my brush drawing slowly. I am retouching an 8x10" 300dpi 8 bit image and using a soft brush at 15% opacity. It could take 5 or 10 seconds for the brush to finish drawing a 6 inch long soft line. There is a delay and I cant do anything else till it finishes. I Have Photoshop CS4 running on Windows XP on a 3 gig machine... with 4 gigs of RAM. I am using 55% memory for the allocation with 20 histroy states and 4 for the cache. I have 1.6 Gigs of available memory and 37 gigs free in a separate scratch disk. I have a Radeon 9800 dual card with 125 megs onboard memory. Do I need to reset preferences because of something funny? My system seerms to be fast enough...but I may need a new video card possibly...I dont have GL2 enabled because its grayed out. My version of CS3 works fine.
In CS4, when I try to paint on an 8x10 300dpi portrait with a large, soft, low opacity brush...the appliction of the brush sometimes runs 2-5 seconds delayed behind where I am. I put down a few dabs and its OK... but then... when I put down 10 dabs in succession...then there is a few seconds delay. This same thing Does NOT happen in CS3. Im trying really hard to fix this by optimizing all I can. I have CS4 on Win XP SP3, and a 3 gig CPU, 4 Gigs of Ram, and an Adobe recommended Gforce 9600 512mb video Card set for open GL2. Ive set the preferences to 55% of memory for photoshop with 2 gigs of free memory, I set the history states to 20 and tried adjusting cache levels from 4 to 6, and I have a separate SATA scratch disk with 32 gigs free. AND, Ive upgraded to version 11.01 I dont get it. Why are my brushes taking so long in CS4 when they run perfectly in CS3?
The psd processor spins not stop until I pick up the wacom mouse and click on an adjacent layer then back to the layer I was working on. Then the wacom pen work with the brush tool. This seems to happen when every time I pick up the pen and go back to the brush tool.
I own a copy of Photoshop CS6.Switching from Photoshop CS to CS6, I have found this version to be extremely slow and I can not find a reason why it is like this. It is impossible for me to work on it. Â Problem: Slow performance, when using the brush tool there is a long delay - lag. The brush takes more than 8 seconds to catch up with my strokes.
Tried: - Memory usage allowed upgraded to 6GB, nothing changed. - Default selected "Scratch Disk" is the main SSD which has over 58GB of free space, I've tried selecting the secondary HDD as well but nothing changes. - Disabled the "Use Graphic Processor" square. nothing changed. - Disabled the "Use open CL" square in advanced Graphic Processor Settings. Nothing changed. - Changed power management settings in windows to "High Performance". nothing changed. - Disabling tablet pc service doesn't work.  Notes: - Graphic drivers are the latest release on AMD website - Windows is completely updated - SSD Firmware is the latest available. - The issue happens both with mouse and tablet. - 1px brush and 5000px brush lag just alike in zoomed and not zoomed canvas. - This happens on both x64 and x86 versions of the software.
I started to edit a picture with the brush. I refined the selection of my area. More I refined, more Lightroom was slow. I have only this brush modifier on this picture. I created dynamic snapshot & 1:1 snapshot during the import of this picture. My RAW is located on a network NAS et my catalog is on my SSD.
My PC config : SSD, Intel i7 Quad core, 8Gb RAM, Nvidia GTX 560 Ti.
My config is good for me to edit only one picture.
I've encountered a problem which is a first for me with Ai CS4, and that is I'm working on a cat illustration but I'm drawing hairs using a brush I've made that have anywhere from 4-5 strokes with multiple colors to mimic the look of hair. Everything was working fine until I used the hand tool to move the artboard around and the image pixelated a bit. Zooming in/out takes a bit of time as well, and then drawing any further strokes from a fresh boot now that I've saved my progress seem to be cached, then appear slowly one at a time afterwards.  I've got a Macbook Pro with 2.4ghz i5 cpu, 4gb ram, running osx 10.7.5. I'm wondering if I'm pushing the limits of the intel integrated graphics card. I have a Mac Pro at home with 8gb of ram although I learned recently that Ai CS4 only utilises 2gb of ram max. Regardless, my tower at home has a dedicated graphics card, ATI I believe.  System monitor reads 346mb free, 920mb wired, 2.03 active, 750mb inactive, used 3.66gb.  Trying to narrow it down to being operator error IE: too complex for Illustrator, or possibly the laptop hardware. I'd love to get back to work on this project of mine  Consequently the artboard size is 11.49in x 14.92in
Situation: You have two hard drives - you intend to have programs reside on one and data on the other. All things being equal - one drive spins faster than the other. i.e. 7200 Rpm vs 5200 rpm vs 10,000 rpm
Question: Would you place the X3 program on the faster drive and the data on the slower drive OR visa versa. I am thinking (dangerous) the data (smart proxy files, saved projects and video files) should be on the faster drive since the "program" probably doesn't use the program drive much and uses more CPU / memory. I have two hard drives - one is faster than the other - which drive should I put the X3 program on and which should I put the data on?[/b][/size]
What can I do to increase render speeds? I'm getting about 400mbps on my raid. I've got a good gfx card, a ton of ram, but smoke just doesn't seem to take advantage of any of it. Watching my cpu/gpu cycles while rendering it always shows that I am using less than 25% of both. Is there a way to tell it to use everything I've got, I know in nuke, and resolve you can do something like this.
Im recording 1080p 30fps with my Canon t3i and it lags during the video preview. Is it possible to render the file to a different format to increase its speeds? I heard this was possible, I just transfered over from Sony Vegas, and in Vegas I didnt have much lag under 1/4 preview.
how to make my photshop application fast few days ago it was working good but now its performance is slow and my computers speed is also slow. How to fix it?
you can see what i mean in the following picture examples.  Selecting a brush (any 1 pixel) brush  [URL]........
shows my selection . Drawing a straight line  [URL]........  Zooming in to the line (600%) you can see i can draw a marquee through half of it ...  [URL].........  No matter what 1 single pixel brush i use this will happen... no matter which computer i use cs6 on and different copies of the installation.  Anyway have any insight into this? frankly... it's somewhat limiting that i can't use the brush for stroking a shape if i need a pixel line and yet soft curves that a pencil won't get you.Â
The brush preview size does not match brush stroke. I've insert a pic of the problem. I tried allmost everythning, but nothing works. Â I use a wacom tablet.
I'm a web developer but have little knowledge of Photoshop. I got a web design job to create something very similar to URL.... Firstly i want to know how to make a brush mild like the white brush on that website. It doesn't overshadow the blue background.
There are a few things I just don't get about brush settings. Sometimes it seems my brushes go all wonky.  When I change the settings for 1 brush... say I add some jitter to a smooth brush - then suddenly the other brushes get the same jitter applied to them.  How can I set the brushes so that each brush has a different setting that doesn't change when I change any other brush settings?  p.s. I also don't get why Adobe has you lock a brush by UNlocking it? Seems to me it should be the other way around?
I have contacted Adobe about issues with Photoshop brushes recently. My issue is that the brush size is smaller than the circle that represents the brush. In other words, when I hoover over the area that I want to paint or erase with the circle and then click, the painted or erased area is smaller that the circle. It's really frustrating when fine tuning an image, you never know how close you are to what you want to correct. This is only visible when you zoom in quit a bit. I worked with an Adobe tech for over an hour and he could not simulate the problem. Then he finally asked if I was using a retina display, (he was not).Â
the brush, stamp brush and eraser tools are giving me a hard time the actual working area from the tool is so much smaller than the outside frame of it URL....
i'm using cs6.the picture i'm working with was enlarged to 400%.the brush, stamp brush tool was at size: 12px, hardness 100%.opacity 100% Â in the presettings i saw the brush was set to normal size.also i played with the jitter sizes, to no avail.
I tried defining a new brush but the sample doesn't recognize color and texture. Is there a way of sampling a small piece of a drawing and making a brush out of it? With the multi colors of the sample?
When I use the healing brush is tends to "skip". It leaves a line of circles like a stamp would instead of a flowing line like it should leave. No matter how slow I move the brush it leaves a circle and then as I continue to draw nothing happens until I reach the edge of the first circle, it then drops another circle and it continues that way as long as I draw with it.  The brush tool works fine, leaves a smooth line. The Spot Healing and Patch Tool work fine but the healing brush will not heal in a smooth stroke. It skips along a leaves a tail of circles the size of the brush. I am using a fast computer, i7 processor, 16bg ram and a SSD drive so I do not think speed is an issue. I upgraded from CS4 where the healing brush worked fine on this computer
Hi, I'm having some issues with my brush. It won't brush any other color, I select different colors on "set foreground" and "set background" colors and no matter what I select it brushes white. Does anyone know why?
Is there any way to add a favorite brush stroke to the list of brush strokes, or do you always have to open the original file to access the brush stroke?
I'm using a tablet with gimp and I want to be able to set the brush size for the paint brush and also for the eraser, separately. What happens now is that I'll set the paintbrush size to 10px, paint for a little while, turn the pen over to erase and the eraser will now be at 10px. So I'll adjust the eraser size to something like 50px, erase, turn over, and now the paintbrush is at 50px. Grrrrrrr... I tried creating new brushes for both the paintbrush and the eraser, but there's no brush size option. This is my first time using gimp so I'm probably missing something.
I'm having a problem with the Blob Brush tool where I can't change the basic brush to something else. Whenever I pick a brush I want and I try draw with the Blob Brush tool, the brush I picked reverts back to the basic brush. Here are screenshots: Â I pick a brush that I like first
But when I start drawing with the Blob Brush tool, it reverts back to the basic brush automatically
Am I doing something wrong or is the Blob Brush tool only capable of using the basic brush?
