This after an install of CS6. They do appear in the flyout menus, but every folder inside the preset folder are apparently empty. I open the install file and found all the preset files there but for some reason they didn't load. ???
[URL]
MacPro 2.6 - OS 10.6.8
I just did a clean install of Photoshop CS6 and I notice it created a Presets folder here:
HardDrive > Users > "Me" > Library > Application Support > Adobe > Adobe Photoshop CS6 > Presets
(the only other folder in that location is one named "AutoRecover")
Of course, I also have my normal customized Presets in the following location:
HardDrive > Applications > Adobe Photoshop CS6 > Presets
I have always used/modified my presets in the second location listed - so what is the bare-bones Presets folder for in Application Support? What is that needed?
I made some presets to effects, toolbar customization (including creating my own), create picture frame and so on. I would like to backup these information considering the case of reinstall PSP and recovery my settings.
a) which are the folders that stores presets, customization and my settings?
b) If I install PSP in other computer, could I just replace these folders in order to recovery my presets, customizations and settings?
c) Recently I reset (shift + F8) the PSP to its factory setting and I lost all these stuffs ! Were the customizations deleted or there is any way to recovery them?
Is it possible to create folders within the tool preset panel to group tool presets, instead of having a long list?
View 2 Replies View RelatedWhen trying to print in Elements 11, after clicking "Print/Page Setup/Presets/Show Presets", the box freezes. Clicking Cancel or OK does not work. I then have to Force Quit Elements to clear it. Apple say that it is a problem with Elements. Using the same procedure in other applications, clicking Cancel or OK does work.
View 8 Replies View RelatedDeleting temp files, if I can just do a blanket Erase, or will this potentially damage autocad drawings. My temp file is on my local drive, but all of our drawings are stored on a network drive. It seems to me I remember these things storing up over time with crashes, etc. But as they build up performance seems to dwindle.
These files range from .tmp files to Texture folders, .cvr files, and nonsense names like A$C5DCD5F31.Can I just window and Delete All?
My new CS5 HDRPRO & Photomerge from Tools & Atuomate would not accet files and was giving me dialog boxes that did relate to the action or would not load the files.
After level one of trouble shooting then more work with a Sr.?Tech last night we isolated that the folders and method of transferring my images from my Nikon D7000 may be causing the HRO & Photomerge function from not accepting
image files in some Folders.
A. Could be the port in my MacBook Pro has failed & is corruting the files.
B. Could be that when I take the origional image files out of the folder created by the Nikon Photoshop does not like that.
C. Photoshop does not like image files after they have been moved from one folder to another.
Somehow my Adobe Photoshop Elements 9 has been corrupted. The photos I added are scattered throughout several folders. And when I open a file, the wrong folder name appears at the top of the display. It seems to have pushed files down through the folder tree, moving previous files into folders that are about 5 folders down. I was going to reinstall, but I received a warning upon "uninstallation" that I need to deactivate my access number, but I don't know how to do that.
View 3 Replies View RelatedWe are new to Adobe Photo Elements (version 8) and are having trouble bringing files into our catalog. When we go to Files> Get Photos and Videos> From Files and Folders, we can select a folder in the root, but then it disappears from view and we can't navigate down to a subfolder.
We anticipated that the folder pane, which looks a lot like Windows Explorer, would allow us to navigate the folder hierarchy until we found the folder or file we wanted to import or open. Apparently, this is not how it works. In our case, we do not want to catalog the whole folder hierarchy, but one of the subfolders.
I want to create a user preset for exporting full size jpegs to a folder to be named later. Whenever I try and save it Lightroom defaults to email.
Here are my settings:
Lightroom 4.2
export to hard drive
choose folder later
jpeg format
Adobe RGB
quality=95
I am having trouble getting my presets to show up under presets on the left hand side of the screen. They are still in develop presets but there not showing up and Ive tried deleting them and adding them again then closing out of lightroom 4 and going back in but I can not seem to get them to show up again. I must have hit something but there not showing up again
View 2 Replies View Relatedopening CS files with embedded subfolders, as you know the Photoshop CS version allows you to have multiple subfolders within folders. But the problem is the shop I work at requires us to work in Photoshop 7 for backward compatibility issues. What happens is when I open the CS files that have embedded subfolders will get lost or combined.
Question: Is there another way to rectify the problem with out opening the file in CS and manually move any embedded subfolders out to the outer hierarchy ? So when I open the CS file all of the layers will show up properly?
I have upgreaded to Elements 10 and when doing the catalog conversion many of the folders in the new catalog are missing the files(photos). When I right-click on those folders and try to add the files I can see the missing files attempting to transfer but on completion I receive this: :The files or folders selected to import did not contain any supported file types or the files are already in this folder"-BUT-the files are NOt in the folder in the catalog. They are in the folder on my computer as I am able to access them easily-They simply did not end up in the catalog's respective folders. I am using Windows XP Pro and all my Folders and Files are on an external drive and are saved there when I download the photos from my camera. I have not had this issue before--How might I get these files into the folder in the catalog?-I tried setting up a new catalog and attempted to convert again with the same results.
View 4 Replies View RelatedHow I move pictures from my files or folders or whatever they are called (pictures I already have in my computer) to Photoshop Elements 11 so that I can edit them. I am having a hard time with this!
View 4 Replies View RelatedHave used previous versions for years but not on this PC. Each time I try to import, it goes through some number of photos, up through 2,00 plus sometimes and then says import failed and I get nothing. It claims the file is the wrong type (only jpgs and psds). I don't know what the stumbling block is or why elements doesn't jut ignore files it can't read and go on to the next.
View 2 Replies View RelatedI have created a few presets for exporting pdf files. Now I want to delete some of these presets and I don't know how to do it.
I do have Illustrator CS4 on mac 10.8.4.....
When I import raw files into Lightroom 4 it seems to apply different settings or some presets to the images which changes the look of the raw file slightly. How can I setup Lightroom so it doesn't apply any changes to my raw files? I prefer to make the changes myself starting with camera calibration, exposure, white balance etc.
View 1 Replies View RelatedI have recenty had to reinstall all my software, and manged to find most of my old Lightroom settings in the Lightroom Presets folder (inside the Appdata folder on a PC) but I seem to have lost my custom tone curves.
Do you know which folder they should be in (indise the Lightroom Presets folder)
I STILL don't understand why there are TWO comminty forums for Lightroom;
New to Elements 12. How can I import photo files and folders from Picasa?
View 1 Replies View RelatedCan I auto export like auto import. I want to auto import raw files, add presets, then auto export DNGs or JPGs.
View 4 Replies View RelatedPhotoshop Elements 6
Windows 7, 64 bit
All Pictures in Folders and Sub folders on hard drive.
New installation of Photoshop Elements 6
I can import all the Picture files but they do not show up in folders. How can I import and keep current organization? Or, must I reorganize?
Is there a way to have the organizer folders set up the same was as Windows Explorer? I have a main folder called Family with sub folders for all the years and in each of the subfolders there could be other subfolders. It wouldn't allow me to click on main folder and get all sub folders. I had to open main folder and then it shows all folders and sub folders separately. They are no longer nested.
Along the same lines, I wanted to create an album of Family with all subfolders, but that doesn't work.that is definitely a short coming which is why I never have used the organizer program, but just PSE for editing.
I have just bought Elements 12. Great programme. I used to use Picasa 3, a good free programme. In Picasa it is easy to move images around in their folders by simply click, drag and drop. This does not work in elements. Is it possible to achieve this somehow?
View 1 Replies View RelatedToday everytime I save a file this message comes up "Folders and files cannot be saved when Autodesk 360 is not running. Start Autodesk 360 and try again"
Why is this showing up all of a sudden and how do I get rid of it or start Autodesk 360.
LR5 stopped listing my previously imported folders/files from my external drive.They show up in the Import dialogue but as the images were previously imported, they are "grayed out" and cannot be reimported. How do I get LR to list them?
View 8 Replies View RelatedHow do you add files to the same catalog from different folders?
View 1 Replies View RelatedHaving organized, edited and rated my photos using Bridge CS4 but recently started getting seriously into LR3 I still want to keep that file structure, either in a transitional period or indefinitely.
I normally use Bridge to import the photos, then spend some time creating sub-folders (one folder per event), organizing them. I'm hoping that I can add those (already organized) folders into LR, but can't figure out how. I see how I can import the photos, but I don't want that as I want to keep them all in the same location (they're all organized on the hard drive as I want them), just have LR "see" them so I can further edit and rate them. How do I do that?
I also want LR to understand and see the edits I've made to my RAW files as well as my ratings, keywords etc.
Are there other things I should keep in mind when having my photos work with both Bridge and LR?
I am trying to organize files and folders in lightroom and I am assuming it works the same way as bridge or better yet Apple Finder.
The file structure does not match from finder to lightroom. I am finding so many duplicated files.
All of my imports seem to go into a 2011 folder. I also tried to create a sub folder within 2011 and promote it to the master Lightroom Photos Folder but it does not work. I've been using a mac for over 20 years and this seems just wrong.
I'm using LR 5.0 in a Windows 7/64 environment.
1. When attempting to rename a folder, why do I get this message: "The folder XYZ could not be renamed or moved."? It only happens to certain folders but not others. I may come back to that folder several days later and the problem won't reoccur.
2. When moving a group of files from one folder location to another, all but maybe one or two will move. Although I receive an error, I try moving those two again, and they move normally.
Admittedly, I am fairly new with Lightroom but I am totally at a loss to explain what has happened. I wanted to create a new catalog to move some files into. I went File>New Catalog and then in the "Create folder with new catalog" dialogue box, I typed in my new name and hit "save". Boom. Lightroom closed right down. When I opened it back up, all of my folders and catologs were gone. Nothing appears in the navigation section on the left side other than the headings, "Catalogs", "Folders", "Collections", etc and they are empty. In "My Computer" all of the folders are still there with the DNG files in place, but LR will not show them to me. why I can no longer access my catalogs?
View 16 Replies View RelatedI have thousands of images and I want to create a resized copy of each in a new tree, is there a way of using scripts to traverse a tree of folders, resize each image and create the new image in a new folder tree? I know this is quite advanced but doing it manually (even with scripts) would take ages.
View 2 Replies View Related