When I import raw files into Lightroom 4 it seems to apply different settings or some presets to the images which changes the look of the raw file slightly. How can I setup Lightroom so it doesn't apply any changes to my raw files? I prefer to make the changes myself starting with camera calibration, exposure, white balance etc.
View 1 RepliesI have one basic metadata preset that I apply to images after they have been imported. I've noticed that on a regular basis, every single image in my library loses its applied metadata preset and it reverts back to "none". For the life of me I cannot figure out why this is happening and I don't know whether it's a bug or a feature.
My standard workflow is that after I import images, I select all the images in the new folder I have designated for those images and apply my specific metadata preset but it seems that a few days later or after I import new images, all metadata presets are gone again. I have noticed this issue with Lightroom 3 and again with Lightroom 4 after I have upgraded so I don't think it's related to a specific version.
I am importing RAW files using LR4. Some images come up blank, from the same CF card, when other appear perfectly. These can be seen when viewed on the camera.
Locating the images through the '?' icon achieves nothing.
I have tested the card reader, another card (which also imports images on a angle), and importing images through Iphoto - incidentally importing images correctly. The images are fine viewed on the back of my D800. I'm thinking it must be the upgrade as I've never experienced this before.
View 10 Replies View RelatedI've created a number of presets for renaming files when importing into Lightroom 4.4. How do I get rid of presets that I no longer want?
View 5 Replies View RelatedI am having 2 problems.
When I am in lightroom's library (3.5), I would like to change the time of capture for multiple photos, and apply keywords.
However, when I perform either of those actions, the changes are only applied to the image shown in the "more brightly highlighted" image, not all that are selected.
Is there a setting I am missing? I just cannot seem to figure out why this is not working.
Also, I aplogize if my searching skills are weak and this has been covered already. I did attempt to see if this question has been answered before posting.
I was just looking through some images and I realized that somehow I have managed to apply lens corrections to exported jpeg and tiff files. These are images that I exported from raw to tiff to jpg through Photoshop and what I think happened was that I didn't notice that Lens Corrections were being applied when I reimported the tiff back into Lightroom. Of course, the lens correction was applied when I developed the raw and made the tiff in Photoshop (or JPEG when I exported thru Lightroom), so a second correction just distorts the image.
is there some mechanism in Lightroom that keeps you from shooting yourself in the foot this way?
After applying star/ratings to images, how do you filter your images based on the number of stars you applied?
View 5 Replies View RelatedLR4 final seems to have a very annoying bug.
When I select a number of images (in the film strip) and either
1) paste settings that I've previously copied from another image or
2) sync settings from one image to the rest
... the settings are not applied to all the selected images. The settings are only applied to a seemingly random subset of the selected images.
I'm going to try to pin down the exact circumstances that make this occur.
[URL]
I used to mark images yellow in LR if I needed to do further work on them in Photoshop. Once exported as jpegs, I'd open them in Bridge and sort for color labels. In the last year or so, Bridge stopped seeing those labels. It doesn't work in CS4 or CS6.
View 6 Replies View RelatedLightroom 4 adjustments arent applied to files.I have done some work and adjustments on Raw files in Lightroom 4 , but when I look at the files in Finder , the changes appear not to have been applied .
If during making adjustments I also edit in Photoshop 5 , then I see that the changes are applied and saved as I wish but I don't always need to make changes in Photoshop , so why do my files appear to be unaltered ?
I tried opening the images that I applied lightroom filters on, and the images did not change at all, though when I go to lightroom the filters are present. Does that mean that lightroom filters only work inside lightroom? Is there a way to save the photos with the filter(s) applied?
View 4 Replies View RelatedI want to create a user preset for exporting full size jpegs to a folder to be named later. Whenever I try and save it Lightroom defaults to email.
Here are my settings:
Lightroom 4.2
export to hard drive
choose folder later
jpeg format
Adobe RGB
quality=95
I am having trouble getting my presets to show up under presets on the left hand side of the screen. They are still in develop presets but there not showing up and Ive tried deleting them and adding them again then closing out of lightroom 4 and going back in but I can not seem to get them to show up again. I must have hit something but there not showing up again
View 2 Replies View RelatedCan I auto export like auto import. I want to auto import raw files, add presets, then auto export DNGs or JPGs.
View 4 Replies View RelatedI have recenty had to reinstall all my software, and manged to find most of my old Lightroom settings in the Lightroom Presets folder (inside the Appdata folder on a PC) but I seem to have lost my custom tone curves.
Do you know which folder they should be in (indise the Lightroom Presets folder)
I STILL don't understand why there are TWO comminty forums for Lightroom;
I am trying to create drawings for a client where we want to have everything coordinate correct and the correct dimension for roads and other info. Their units are set to Engineer and Unitless (which I do not have control over). Plus we assign a state plane coordinate system to the drawing.
When I import lidar information from a .shp file it may be placing the lines/images correctly, but I'm measuring 5' for a road that is actually 60' (I did notice that it is a multiple of 12). I can't scale everything up by 12 from the origin - because then I would lose the coordinates... In Decimal - everything is fine (naturally =] )
How do I bring in information and have it measure correctly? And more importantly, that I can then draw correctly.
I
Trying to import some still images into Smoke 2013. There are 15 files, all from the same source, all the same format (.png), however, when I open the folder in the mediahub, it reads 2 or 3 of the files and nothing else. The other files are in the folder and are no different than the ones Smoke does read, yet for some reason the other files are nowehere to be found through the mediahub. This isn't the first time I've had something like this happen.
View 1 Replies View RelatedI recently upgraded to Map 3d 2010 to Mapd 3d 2013 and i cannot figure out how to find the commands to insert images or import/export shp files.
I'm running 2013 in "autocad classic" and did so with 2010 as well. 2010 had a menu bar pull down called "Map" where I could insert an image (Image->Insert). There was also in 2010 a toolbar named "Map" that had import shp, export shp and assign coordinate system.
I can't find any of this in 2013. I can't even find the commands in the customization to create my own toolbar. The commands work (mapiinsert, mapimport, mapexport and ADESETCRDSYS) but i can't find them listed anywhere.
When importing some of the images have a warning triangle indicating that LR is having trouble reading the photo. Subsequently the rendering of the 1:1 previews stalls.
View 4 Replies View RelatedUpon importing raw images from D800 into LR5, some of the images appear as pixelated (kind of like what u see sometimes before the image gets completely rendered). Are these corrupted? Is it my card or the import process or my camera?
View 4 Replies View RelatedWould there be any difference in importing images from the latest iPhoto into the older version of LR2, then when I upgrade to the latest LR would there be any issues with those (iPhoto) images imported into LR2 into the newer LR?
View 4 Replies View RelatedIs there a way to filter images before importing them in Lightroom?
ScenarioI work with an extensive image collection stored on a server. The images contain a full set of metadata, including keywords and more. When I work on a specific project, I import the images into a Lightroom collection. That way I can easily review, rate and add additional keywords to those best-of images.
The challenge is that the images I want to add are from numerous folders. Plus, I often only want to add some images from those folders (not the entire folder). This collection process can be very time consuming -- manually locating the images and checking/unchecking the ones I want and repeating the process for the different folders the images reside in.
The process could be greatly simplified (and a lot faster) if I could filter/search for images that contain key words or other metadata to find the full set of images I want to import.
The key is that I’m not using a workflow to simply import all images from a memory card or download folder. I’m working from a large collection of existing images and want to import a subset of those images.
I imported images into Lightroom from a folder I created on my desktop, I got images from Iphoto, and now Lr tells me images are "offline". I cannot work on them. I haven't purchased license yet and am using the 30 trial, though I don't thing that should matter.
View 15 Replies View RelatedLightroom and am having trouble importing images from an SD card.
View 1 Replies View Relatedis it possible to view images on memory card in LR without importing or before importing?
View 1 Replies View RelatedImporting images from specific folders is including images from outside selected folders.
View 3 Replies View RelatedWhen I import images from my memory card, the images in preview are colored but when rendered in LR4, they are automatically converted to black and white. I made sure that in the import panel that 'Import During Import'> Develop Settings> None. My images show up in LR4 colored for an instance then convert to black and white. This is the first time I have encountered this problem. Am I missing something. I've checked my camera settings with nothing that I believe is the problem. I've been successful in using the other presets under 'Apply during Import' > Develop Settings, but using 'None' doesn't prevent the images from being converted to black and white in LR4. the same is true for importing to Bridge in PS-CS6. I get the same results of all the images being converted to black and white.
View 7 Replies View Relatedwhy Lightroom 4 is importing my images with a warmer tone, then exporting with a cooler tone. There are no presets selected on import so why is it doing this??
View 2 Replies View RelatedHow can I import images into a new LR library and retain the existing metadata for each image? It only seems possible to import and apply new metadata or to import without applying metadata which means the existing metadata is not imported...?
View 5 Replies View Relatedwhen importing my raw images into lightroom4 they are automatically editing how do i change this?
View 17 Replies View Related