I'm trying to make a display picture (An avatar of sorts) to use, but whenever I try to, any picture I place using "File > Place" gains like a seipatone color instead of its normal colors. Here is what I do, step-by-step:
1. Open Adobe Photoshop CS6 (64-bit)
2. Start a New Project.
-Width: 160, Height: 220, Resolution: 72 (Width and Height are in Pixels)
-Color Mode: RGB 16-bit (I've tried all bits of RGB mode)
3. File>Place and browse for the image. It is not at all brown-scaled right now.
4. It turns brown.
Here is the example I'm showing:
Normal Picture: [URL].......
In Photoshop: [URL]............
I've used this same version, same steps, and created all kinds of artwork. But all of a sudden, everything turns up brown.
I have plain old Photoshop CS and recently when I opened it to use it all my white went tan/brown almost like a light sepia toning. I've tried changing the color preferences to no avail. Anyone have any suggestions how to get white to be white again?
I have a pen and ink image that is black and white. I want to make the black .. brown. I did that no problem. When I move this image onto a blank document, it goes back to brown. How do I maintain my brown image on a new document?
I had a hard drive crash which required a new hard drive, unfortunately unconfigured. I am up and running but my printer, Epson SPR1900, produces very dark images with a heavy brown overcast. I have a Dell Desktop running Windows 7, Dell Monitor, ,NVIDIA GeForce 220 graphics card with a new driver update.
I have calibrated the monitor with my Spyder2 and use the following settings:
Under EDIT >Color Settings>Custom. Working space>ProPhoto. VIEW>Proof Setup>Device to Simulate> SPR1900 Premium Glossy. PRINT (PS-CS6) Color Management ICM>off, No Color Management.. In Color Management, Color Handling>PS Manages Color. Printer Profile>SPR1900 Premium Glossy.
Rendering is Relative Colorimetric. Prints still very dark with a marked brown overtone. Prints were beautiful before the hard drive crash.
I reformatted my computer and installed a fresh copy of Windows 7 service pack 1 and installed Photoshop CS6 and when I print my work the color gray prints as brown and the yellow green has a shade of brown in it as well so its darker. I did calibrate my monitor, I use sRGB IEC61966-2.1 as ICC profile and RGB in working spaces, and US Web Coated v2 as CMYK. I changed the mode to CMYK 16 bit and proof setup to Working CMYK. In printer setting I set the color handling to Photoshop manages colors and set it to hardproofing. I did match it with the color management in display settings.
I think my Epson T1100 printers are fine because they both print the same color gray as brown so it must be in Photoshop where the problem is.
This is frustrating..Before I reformatted I was using Photoshop CS5 and my prints are fine but when I reformatted and installed a fresh copy of Windows 7 and Photoshop CS6 the printing problems starts, I reinstalled Photoshop CS5 but the print outs still has problems, color gray prints as brown..By the way, I print on white bond papers and white box boards, so color blending is not the case I'm sure..
I need to change some lines that are in a layer from a black/gray to brown. So I tried to change it by right clicking (PS 7.0) and blending options then tried a bunch of stuff and nothing seems to work: color overlay, blend mode, blend if... but I can't get the color.
I would greatly appreciate it if someone tell me how to do this? The color I need is somewhere between #734002 and #B16203.
to change the eye colour but there aint any to change the eye colour if you have brown eyes because the colour doesnt look so natural so does anyone has a tutorial for me to change the brown colour Green Or Bleu
i accidentally tried to apply a texture as the texture panel was loading a folder and i got the blue screen of death... the computer recovered by itself, but i am now unable to open photoshop. I get the 'program has stopped wotking' after the splash screen
i tried russell browns' just fixit' and it didnt seem to do anything, but i got an error about 'endscript toolkit 32bit stopped working' ...then photoshop started opening and closing by itself a few times, still with the error notice.i uninstalled the script using the extension manager, no difference, then i reinstalled ths script.. what next?
computer is i7 3770 CPU 3.5 ghz 32 gigs ram, and several drives inside for programs/data/ scratch disk/ backup catalogues etc. picture drives are external.
Here's the skinny..... I obviously have chosen to have photoshop control the color management. The closest I have come is to use the printing profile: Japan Color 2002 Newspaper without black point compensation (I think I used Relative Compensation). The only way I can get the yellow to show on the brown is to actually PRINT a brown paper background ON TOP of the brown colored paper.
Obviously, this is causing the brown paper to look quite dark. The yellow is perfect and I've now lost every other color (Navy & 3 shades of Gray). They're all dull against the multi-layered brown. I have tried manipulating the yellow to be more green or more orange and sure enough, they turn out looking green or orange. Should I switch to CMYK instead of RGB? If orange is a variation of brown, why does orange show up on brown so much easier than yellow?
Is there a way to manipulate the newspaper profiles to adjust for browner paper rather than grayer paper?
I took photos at a wedding over the weekend. The river behind was a perfect setting however, the water was brown from recent rain. I'm using Elements 11 and I'm wanting to know if there is a way to make the water look less brown and more blue?
How to install the Dr Brown and Watermark installer scripts via Adobe Extension Manager? I am running Win7 and CS 4, and have opened CS 4 as an admin. Still, no luck.
when trying to install the Dr Brown services, I get "You do not have the appropriate permissions required to perform this operation. Contact your system administrator to obtain permission."
For the Watermark script, i get "Can't create folder 'C:Program Files AdobeAdobe Photoshop CS4 (64 Bit)Plug-InsPanelsWatermark'. I created that folder manually via Explorer but that didn't work.
I have a square of a bown color. I would like the same brown but mixed with white (I just want it more pale, 50% more) how can I do that? CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
I'm using Ai CS6 64bit now on windows 8, and I have a problem with the black and grey colors, because they look like brown variations...In the past I hadn't similar problems, but recently I changed my notebook to an Asus KB56, from Acer.
I attached the 1st picture to show exactly what is the problem, the colors should to be all black, but they are brown...The second picture shows them in paint, which works perfect...
I'm using Lightroom 4.1 and Photoshop Camera RAW from CS5 version 6.6
In Lightroom I'm getting some brown splotches on the faces of the groomsmen to the right. These splotches while less noticeable also appear on the bride and groom.
Process the same RAW file in Camera RAW and there are no brown splotches anywhere on the photos.
how I can get rid of this anomaly in Lightroom?
See attached photo. Lightroom file on top and camera raw file on the bottom.
I have a small grey 'play' icon which I want to change the grey area to brown. (Looks like I can't paste it here). It isn't just one color and has a side of ridge that shows an outline you'd press.Can I use PSP7 somehow to make the colour change?
I am trying to do some very basic stuff. I have a brown background and I want white letters on top of it. I have tried setting the Primary color to white and the Secondary color to brown, vice versa, and also setting both Primary and Secondary to white. No matter what I do, my letters don't show up, presumably because they are brown.
How do I get white text to actually show up on a brown background?
Im having a really bad day working on CC Illustrator, i copied a .ai file and a .eps file from my old computer to continue working on a logo. And everythings works well, without the colors.
I want it BLACK, 000000, but the Illustrator turns it into differnt blacks and brown! Never seen this before.
When I copy my work back on the old computer and open it on CS3 it shows that it is black, but when i copy it on my CC Photoshop it shows up brown?
I tired making a new file, copying things over, making a new project writing randoms things but its all brown, and i tired to change both CMYK and RBG, and ofcourse the color! It worked fine if I wanted blue or red, but not BLACK.
I would love to be able to produce gold leaf text on a brown leather background. I watched the Photoshop tutorial about it but the menus and results were too different to follow along. Are there any tutorials about doing this with Gimp 2.8.6?
I've seen some excellent tutorials about creating chrome text with effects but I can't find any for gold.
20110421veiwports turning off.jpg AutoCAD isnt being nice to me lately another hassle i have is the viewports randomly turn off ( they dont show anything) and when i turn those ones on, others turn off.
i dont know how to change the topic to "solved" however a collegue told me to enter MAXACTVP at the command line the value was 16, i was told to set it to 64 ( i had 21 viewports ) and they all came on.
I am trying to download pictures in folders and sub folders into the LR catalog. The import brings all the pics in the subfolders over but when II click on the parent folder it shows not pictures or number of pictures in it.
I imported pictures to Adobe Lightroom and exported them to my memory card. Now my memory card is broke! Is there any way to retrieve those pictures from Lightroom. Right now they are saying missing.
When I click the select tool, a brown selection type of rectangle appears in a particular area of the illustration, even though I have not clicked on the illustration yet. I assume it is some type of warning indication, but don't know what. P.S. It is draggable and scaleable - I can move it off the artboard. An example:
I am trying to place pictures into my paragraph text so that the text wraps around the picture (like you can in Word).? Can anyone let me know how to do this in Photoshop 7.0 for Windows??
All I can find is how to wrap text around object (i.e. word on a coffee cup image itself) or putting the actual picture as fill for the font.?
how to do this? I have included a PDF of a sample of what I'm trying to do.
I got a new HP computer. All I have loaded is CS3 Premium and Artizen. It has Vista Premium as the OS, it came OEM. So far I've managed to strip it down as much as I can..( remove all the trial software it came with ). This computer isn't connected to the internet nor do I want it connected. I use it strictly for Digital photography and my internet connection is on another machine. I want this one 'virus', spam and spyware free. ( sterile ).
So here's the problem... I keep getting this 'NAG' that I don't have an anti-virus program running and my computer's at risk. How do I tell the damn machine that I am not connected to the internet and don't want an anti-virus eating up my resources and to leave me alone?
