Photoshop :: Russell Brown Script Error CS6 Windows 7?
Feb 5, 2013
i accidentally tried to apply a texture as the texture panel was loading a folder and i got the blue screen of death... the computer recovered by itself, but i am now unable to open photoshop. I get the 'program has stopped wotking' after the splash screen
i tried russell browns' just fixit' and it didnt seem to do anything, but i got an error about 'endscript toolkit 32bit stopped working' ...then photoshop started opening and closing by itself a few times, still with the error notice.i uninstalled the script using the extension manager, no difference, then i reinstalled ths script.. what next?
computer is i7 3770 CPU 3.5 ghz 32 gigs ram, and several drives inside for programs/data/ scratch disk/ backup catalogues etc. picture drives are external.
View 18 Replies
ADVERTISEMENT
Dec 30, 2005
Everything is brown. It goes from white to brown to dark brown to black.
Here is an image I got by screenshooting twice.
View 4 Replies
View Related
Apr 8, 2008
I have plain old Photoshop CS and recently when I opened it to use it all my white went tan/brown almost like a light sepia toning. I've tried changing the color preferences to no avail. Anyone have any suggestions how to get white to be white again?
View 6 Replies
View Related
Aug 29, 2006
I have a pen and ink image that is black and white. I want to make the black .. brown. I did that no problem. When I move this image onto a blank document, it goes back to brown. How do I maintain my brown image on a new document?
View 2 Replies
View Related
Feb 23, 2009
When I double click on a PSD file in Windows explorer on a Win XP Sp3 I get an error from Photoshop -
Adobe Dialog manager: "Unable to load required component Unicows.dll". Clicking Ok causes Photoshop (CS3) to hang and it has to be killed in Process Explorer.
The problem does not occur if the file is opened within Photoshop via the file open dialog.
View 4 Replies
View Related
Apr 22, 2013
I'm trying to make a display picture (An avatar of sorts) to use, but whenever I try to, any picture I place using "File > Place" gains like a seipatone color instead of its normal colors. Here is what I do, step-by-step:
1. Open Adobe Photoshop CS6 (64-bit)
2. Start a New Project.
-Width: 160, Height: 220, Resolution: 72 (Width and Height are in Pixels)
-Color Mode: RGB 16-bit (I've tried all bits of RGB mode)
3. File>Place and browse for the image. It is not at all brown-scaled right now.
4. It turns brown.
Here is the example I'm showing:
Normal Picture: [URL].......
In Photoshop: [URL]............
I've used this same version, same steps, and created all kinds of artwork. But all of a sudden, everything turns up brown.
View 13 Replies
View Related
Sep 21, 2012
I had a hard drive crash which required a new hard drive, unfortunately unconfigured. I am up and running but my printer, Epson SPR1900, produces very dark images with a heavy brown overcast. I have a Dell Desktop running Windows 7, Dell Monitor, ,NVIDIA GeForce 220 graphics card with a new driver update.
I have calibrated the monitor with my Spyder2 and use the following settings:
Under EDIT >Color Settings>Custom. Working space>ProPhoto. VIEW>Proof Setup>Device to Simulate> SPR1900 Premium Glossy. PRINT (PS-CS6) Color Management ICM>off, No Color Management.. In Color Management, Color Handling>PS Manages Color. Printer Profile>SPR1900 Premium Glossy.
Rendering is Relative Colorimetric. Prints still very dark with a marked brown overtone. Prints were beautiful before the hard drive crash.
View 1 Replies
View Related
Jan 27, 2013
So I have 64-bit Windows 8, 64-bit Photoshop CS6 and an ATI Radeon HD 4770 GPU. When I go to the settings in PS, it tells me that there is a problem with my display driver so I cannot use GPU graphics processing. I would really like these features to be available to me, especially since my GPU meets the recommendations by Adobe. I installed the latest driver from AMD.
View 5 Replies
View Related
Feb 8, 2013
I reformatted my computer and installed a fresh copy of Windows 7 service pack 1 and installed Photoshop CS6 and when I print my work the color gray prints as brown and the yellow green has a shade of brown in it as well so its darker. I did calibrate my monitor, I use sRGB IEC61966-2.1 as ICC profile and RGB in working spaces, and US Web Coated v2 as CMYK. I changed the mode to CMYK 16 bit and proof setup to Working CMYK. In printer setting I set the color handling to Photoshop manages colors and set it to hardproofing. I did match it with the color management in display settings.
I think my Epson T1100 printers are fine because they both print the same color gray as brown so it must be in Photoshop where the problem is.
This is frustrating..Before I reformatted I was using Photoshop CS5 and my prints are fine but when I reformatted and installed a fresh copy of Windows 7 and Photoshop CS6 the printing problems starts, I reinstalled Photoshop CS5 but the print outs still has problems, color gray prints as brown..By the way, I print on white bond papers and white box boards, so color blending is not the case I'm sure..
View 30 Replies
View Related
Jun 10, 2013
I was wondering if I can paint the brown box with blue but still keep the texture.
View 7 Replies
View Related
Feb 6, 2009
I need to change some lines that are in a layer from a black/gray to brown. So I tried to change it by right clicking (PS 7.0) and blending options then tried a bunch of stuff and nothing seems to work: color overlay, blend mode, blend if... but I can't get the color.
I would greatly appreciate it if someone tell me how to do this? The color I need is somewhere between #734002 and #B16203.
View 2 Replies
View Related
Oct 10, 2007
i tried to do that with one of my own pictures but i have brown eyes!
So when i try to turn it into green or bleu it looks so unatural.
View 4 Replies
View Related
Dec 18, 2007
i am trying to remove brown discolouration on petals of a frangipani.
i have tried a few different tools.
what is/are the best tools for this?
View 3 Replies
View Related
Oct 10, 2007
to change the eye colour but there aint any to change the eye colour if you have brown eyes because the colour doesnt look so natural so does anyone has a tutorial for me to change the brown colour Green Or Bleu
View 1 Replies
View Related
May 6, 2013
I downloaded and installed cs6 for windows 7 32 bit and cant open it to use,i get the message" adobe photoshop cs6 has stopped working" I have tried different graphics drivers but still the same. My other adobe softaware works fine,IE: elements11 and lightroom4.
View 5 Replies
View Related
Mar 13, 2013
On my new Dell XPS 8500 Win 8 computer Photoshop CS6 keeps stopping working. I've tried both 64-bit and 32-bit versions and updated the video driver after phoning Dell. Also installed latest Adobe program updates. I keep getting the error message "Adobe Photoshop CS6 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
View 14 Replies
View Related
Aug 25, 2013
When I try to start the CC in 64 bit mode I get the error 0x0000005. (in 32 bit there is no problem)
I'm using Windows 7, 64 bit and have been using other Photoshop versions without any problem. My current version of Photoshop is CS6. I've updated the Nvidia driver and that didn't work.
View 1 Replies
View Related
May 27, 2013
When I try to install Photoshop Elements 1.0.1 on a Windows 8 64 bit computer, it says I must have IE 4.0 or higher and I have IE 10 installed. How do I get Photoshop Elements 1.0.1 to install.
View 1 Replies
View Related
Nov 13, 2013
Here's the skinny..... I obviously have chosen to have photoshop control the color management. The closest I have come is to use the printing profile: Japan Color 2002 Newspaper without black point compensation (I think I used Relative Compensation). The only way I can get the yellow to show on the brown is to actually PRINT a brown paper background ON TOP of the brown colored paper.
Obviously, this is causing the brown paper to look quite dark. The yellow is perfect and I've now lost every other color (Navy & 3 shades of Gray). They're all dull against the multi-layered brown. I have tried manipulating the yellow to be more green or more orange and sure enough, they turn out looking green or orange. Should I switch to CMYK instead of RGB? If orange is a variation of brown, why does orange show up on brown so much easier than yellow?
Is there a way to manipulate the newspaper profiles to adjust for browner paper rather than grayer paper?
View 3 Replies
View Related
Jul 27, 2013
I took photos at a wedding over the weekend. The river behind was a perfect setting however, the water was brown from recent rain. I'm using Elements 11 and I'm wanting to know if there is a way to make the water look less brown and more blue?
View 3 Replies
View Related
Feb 20, 2012
Upon launch of my Photoshop CS3 (legit copy, purchased when CS3 was new) yesterday, I received the message [URL] I tried everything there to no effect. I tried to reinstall to no avail.
View 5 Replies
View Related
Jun 11, 2013
13.0.1.2 Installation failed / Error Code / U44M2P7 ?I need it to work.
View 3 Replies
View Related
Aug 28, 2012
I uninstalled Photoshop CS5.1 ME (Middle Eastern) version from my 64bit operating system (Windows 7 Home Premium) and went on to install CS6 EXTENDED after a fresh restart (I also deleted remaining CS5 folders in "Program Files' Adobe directory"). The setup went fine. But, when it finished, it gave an error message saying that Adobe Photoshop CS6 didn't install or didn't install correctly. From there, I copied the error report/log it gave out:
Exit Code: 6 see specific errors and warnings below for troubleshooting. For example, ERROR: DF050, DW063 ... WARNING: DF029 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 6 error(s), 1 warning(s)
----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 -----------
[code]...
Photoshop started fine and worked fine (only used it a bit) after the "failed" installation but, the Update option in the Help window was grayed out (trial version, just to let you know). Is that a limitation to the trial version? Or is it straight up an error?
My question is, what did the error report mean and what could be wrong with my currently installed version of PS? BTW, I didn't use Mini Bridge yet, although all of its files are present in the Program Files directory for Adobe.
View 2 Replies
View Related
Sep 19, 2013
Came pre-loaded on my PC. After using many many times, now selecting Editor causes a runtime error. Running Windows 7.
View 3 Replies
View Related
Jul 29, 2012
Yesterday, I started getting an error when trying to set the default colors and then flipping them. I also get a program error when I try to click on the foreground color and manually assigning it with white.
This is a Windows 7 Ultimate, with PS CS6.
I closed the program twice and ran into the same problem, then rebooted and got the same errors. As far as I can tell, this is the only tool or feature acting up, other than the actions which have this step in them.
Looking for an easy fix first, of course. Like maybe deleting the Prefs file? Mac people seem to have to do that regularly.
But, if nothing works, will I need to uninstall PS and reinstall it? Would that also mean I'd have to install all of my filter packages again, too?
View 4 Replies
View Related
Mar 6, 2009
I try to run Photoshop.exe, but it doesn't respond. I get this error message. How to fix it? I have no idea where is a problem? I had no problems with it earlier.
ERROR MESSAGE:
Description:
A problem caused this program to stop interacting with Windows.
Problem signature:
Problem Event Name: AppHangB1
Application Name: Photoshop.exe
Application Version: 8.0.0.0
Application Timestamp: 3fce5708
Hang Signature: 1875
Hang Type: 0
OS Version: 6.0.6001.2.1.0.256.1
Locale ID: 1063
Additional Hang Signature 1: 3732c99c21cdca196fbfee3cc7094b85
Additional Hang Signature 2: 848c
Additional Hang Signature 3: 5c7261f725b6a443e8327138a3fe0208
Additional Hang Signature 4: 1875
Additional Hang Signature 5: 3732c99c21cdca196fbfee3cc7094b85
Additional Hang Signature 6: 848c
Additional Hang Signature 7: 5c7261f725b6a443e8327138a3fe0208
View 1 Replies
View Related
Jun 7, 2009
I've been using Photoshop Elements 5.0 for a few years now on my PC running Vista. Beginning just a few days ago (and unconnected to any updates of which I am aware), I started getting an error when I tried to delete or import files in the Organizer. The error says: ODBC data source [Microsoft] [ODBC Microsoft Access Driver] Cannot open database "I". It may not be a database that your application recognizes, or the file may be corrupt. The photos are there - I can see them in Windows Photo Gallery. I can delete photos from there as well. Just not in Organizer. Wondered if anyone might be able to point me in a good direction for a fix?
View 2 Replies
View Related
Mar 24, 2012
How to install the Dr Brown and Watermark installer scripts via Adobe Extension Manager? I am running Win7 and CS 4, and have opened CS 4 as an admin. Still, no luck.
when trying to install the Dr Brown services, I get "You do not have the appropriate permissions required to perform this operation. Contact your system administrator to obtain permission."
For the Watermark script, i get "Can't create folder 'C:Program Files AdobeAdobe Photoshop CS4 (64 Bit)Plug-InsPanelsWatermark'. I created that folder manually via Explorer but that didn't work.
View 1 Replies
View Related
Feb 25, 2013
I've just tried to export a page as a pdf for the first time since upgrading to windows 8 and I'm getting a strange problem. In the image I have a text string which has a bevel, contour and drop shadow. When this exports it is surrounded by a black box. This also happens in another area with 2 circles both with shadows and again this is surrounded by the black boxes. I had previously exported an identical poster from designer pro X on windows XP without a problem.
So far I have tried exporting it at different dpi settings and in pdf 1.4 to 1.8 but not pdf/X yet.
View 5 Replies
View Related
Oct 30, 2012
After importing 48 photos into a large collection, 46,000+ photos, and reviewing in the Library module, LR 3.6 crashed and reported a database error. It suggested repairing the database, but could not. The next window suggested an Adobe Technote, but the link was broken. I have a Dell Dimension E510, w/ 4 GB RAM, Pentium D 2.8 GHz, reporting 3.62 RAM and running XP Pro, Version 2002, SP3. All my HDDs have at least 80 GB of free space w/ the one I was working on with 464 GB of free space.
View 3 Replies
View Related
Aug 9, 2013
I have run LR 3 for some time and it has worked well. I have been away and when I now wish to run the program I get an error from Microsoft C++ runtime library saying that the program has requested to terminate in an unusual way. Re-installing LR has not solved the problem
View 4 Replies
View Related
