I''m trying mystical light and others, but can't figure it out. I don't see anything happening even though I'm pulling all sliders. Don't see a preview box either. What am I doing wrong?
View 2 Replies
In CS3 you could change something to make all filters act like smart filters, even though they won't. I found this worked very well, now I have CS4 and would like to do the same but can't remember what to do to make it work.
View 6 Replies View RelatedI would like to take my many photos and videos and be able to batch edit a folder's worth at a time after they have been added to my timeline. I have several that have the same lighting problems and that would save me allot of time.
View 1 Replies View RelatedDo all filters work with a 16bit image in Phoshop 13.0.1 x64?
View 14 Replies View RelatedFor some reason some of my filters seem to only work as "embossed." I don't get it. If I try to place a cross-hatch over the entire layer only the edges seem to be affected.
View 3 Replies View RelatedI create new file, add 1st layer, pick colors on color pallette, and try to do difference clouds or halftone pattern and i get an error message saying that nothing is selected. I click on the layer in the layers pallette to be sure that the layer is selected, and it still won't work. Is there something special i need to do? i know in older versions, you could just use the filter...
View 1 Replies View Relatedif there are any tutorials using PIP for VS X3. Also have found that some of the FX filters do not work and I was of the understanding that they were included with purchase = such as Ripple and Twist? I sometimes get a message when trying to use one of these FX filters asking me to register - what is that for is it for the newsletter from Blue FX?? I do not want the feature if it is only a trial and then you discover you can't remove it like previously.
View 2 Replies View RelatedNik Filters do not work with LR4. Contacted Nik three times today. At their request, un-installed all filters, then re-installed, to no avail. They then said "some are having success un-installing Elements, then re-installing." Tried it to no avail.
View 3 Replies View RelatedYesterday, Library Filters worked in Lightroom 4, but today they do not. Whenever I pull up the Metadata filters and select a parameter, the title of the filter switches to "Custom Filter" and nothing is selected.
View 1 Replies View RelatedWhen I paste into Photoshop CS5, the illustrator selection is too small or too big... auto Resize does'nt work. It used to work perfectly in CS4.What can i do ?
View 2 Replies View Related In "Categories" of the filters window, it can be selected things which composes its mass, such as Mass Exterior Wall, Mass Glazing, Mass Roof. And these things can be clicked only after its mass become energy model.
I set up a filter rule of Mass Roof and applied it to V/G Filters of a view, but it did not displayed in Analyze Mass Model, the same as Mass Exterior Wall, Mass Glazing.
I'm trying to find a way of filtering the 'work in progress' section visibilities from a plan by view filters. The filter I use is 'Sheet Name' equal '<None>'. Then turning off visibility. It works when used in the Browser organisation filters but not in the view filter for the sheets.
I don't want to create a check box or dialogue box for the sheet as this will add to the required maintenance.
I just got PSE CS6 and the blur too will NOT work ....blur filters work, but not BLUR in the tools panel I have tried: unintstall/reinstall, updating, using it no a picture straight after opening it, duplicate layers, selecting an area and then blurring....flattening an image, every single different setting in the the blur tools menu bar NOTHING works. And everything I find about blur is the new blur filters....
View 1 Replies View RelatedIm working with IV2012 and my autodrop feature doesn't work altough the checkbox in the content center is checked on. i can't seem to find a solution on my own.
As far as I know the feature has never worked since I went from IV2011 to IV2012. (alot of troubles in the beginning btw, most of it is gone since service pack installed)
when importing in Lightroom 4, the auto tone adjustment function does not work properly. Most images come out strongly overexposed and there is no way to stop it
View 2 Replies View RelatedTHe auto key button doesn't seem to work in a gmask node in CFX. keyframe added even if autokey is off. bug?
View 1 Replies View RelatedIn LR5, Slideshow module, the arrow keys do not move to the next or previous image in the auto mode. They do work in the manual mode, but I need them to work in the auto mode as well.
View 5 Replies View RelatedI have photoshop cs4 and I cannot find the Auto smart fix, auto levels, and auto contrast nor the adjustment for each that I had with photoshop elements.
View 10 Replies View RelatedI have hardly ever used filters for any of my work as I have preferred using Xara's native tools and effects to get what I wanted. But recently, I was inspired by some animation work which used backgrounds painted in Photoshop. They used a lot of textures which enhanced the look of the animation and so I thought I'd try to simulate it within Xara.
It works very well and I can export it as a PSD retaining the layers and Alpha channel. But here come my questions.
1. How can I remove the two Alien Skin demo plugins as I already have the full versions.
2. Why don't the native Photoshop plugins--Artistic, Sketch, etc.--seem to work?
I just downloaded a bunch of filters and I dragged them into the filters directory under plugins, but when I open photoshop, none of the filters are there.
View 4 Replies View RelatedI shot an event for a couple (a reception) and I didn't have my gray card so I set my Canon 5D mkII on auto white balance (shooting with a Canon 24-70 2.8 and a Sigma 85 1.4). As you'll see from the two example photos - the shots taken in the venue lobby looked fine, but the shots from inside the event itself were amazingly saturated. The room had a ton of very bright uplighting in purple and pink - the shots looked fine in the viewfinder, but once I brought them into LR4, there was a nearly complete purple/pink cast over everything. Setting the white balance in LR to auto, tungsten, flourescent - nothing worked. Adjusting the temp sliders - only slightly better. Reducing vibrance and saturation useful a little more, but I'm really having a hard time finding a fix!
View 6 Replies View RelatedI downloaded and installed GIMP 2.8.8 in Windows XP. The Filters menu option shows only Repeat last, Re-show last and Reset all filters.Nothing else in there. Where are the filters?
View 1 Replies View RelatedI am working on a dormitory project and need to provide a required light and ventilation schedule. I have figured out how to create a schedule for each level, but I want to isolate only the Dormitories and the Kitchenette (weed out all the other rooms such as corridor, elevator, storage, toilets, showers, stairs, trash, electrical, etc.).
I tried using seclusion filters, but there are too many items to exclude and cannot fit them all into the 4 filter categories. I am trying to just get the rooms that begin with 'D' and 'K'. I tried providing the variable 'Begins With' for D and in the next line 'Begins With' K, but then nothing shows up.
Is there a way to provide information to the filter that would allow it to show only rooms beginning with D AND K? I cannot seem to get it to work. I have been playing around with separation values within one filter category (i.e. 'Begins With' D, K) but apparently you cannot add multiple variables within one of the filter items.
I was using these tool on a lot of images, because they often seemed to vastly improve them, making the colors pop on otherwise somewhat dull ones, and getting rid of unwanted color casts..
Later though I noticed that it is often at the cost of burning out hightlights in some areas beyond salvation.I also find shadow /highlight sometimes does this also.
Then I tried to protect some small areas with a mask before proceeding, but it seems that I can't find information on just painting a mask, but only videos with much more complex adjustment such as the Russel Crow or Lynda ones with maintaing hair detail while superimposing images, which is way beyond what I need in these cases.
If I try the wand to select and inverse I get unnatural looking divisions. Is it a matter of feathering to the right extent?
I have just moved from 7.0 to CS3 (and PC to Mac) and am currently trying to get to grips with the new features! Once which I love is the auto-align and auto-blend feature(s). My question is, is there any way to control how these features work? I have seen on some web sites people talk about 'fuzziness' sliders where you can control that if an object (pixels) appear in X% of the photos they should/shouldn't be included in the final image but I cannot find these.
My intention is to use these features to take photos of monuments and have the people who are moving about removed from the final image (I guess it's the auto-align that would do this.) I tried a test and took a number of photos at home but I kept moving one object around (a pen.) The pen appears in all the images but in a different location so it always appears in the final image. When I tried auto-align with a stack that included one image without the pen, the pen was removed from the final image. Given the first scenario (i.e. the object is in all the images but in a different location) is there any way of automatically removing it using auto-align or would this have to be a manual process? In the real world, it would be possible to take a photo of a monument with people in different locations but it would be much harder (or take a long time) to take one where at least one person was not in all the photos (there's always someone loitering.)
Yes, I'm probably the only person on the planet that wants this, but I liked how the Auto Tone auto adjusted the Exposure slider (ONLY!) and left all the other sliders at zero in the Lightroom 4 beta.
Is there a way to write a preset that returns that behavior?
I downloaded the Pixel Bender toolkit for my mac. The file are under utilities..how to get the filters in PS CS5.
View 13 Replies View RelatedPS CS5 filters are not all available. re-installed software, same result
View 4 Replies View RelatedWhen I'm editing a file in PS CS5, when I want to used Artistic Filters it's greyed out, as are most of the options in the Filters menu. This happens whatever type of file I'm working on, and it doesn't matter whether I'm working in layers, a flattened image or a fresh image that's completely unedited and am using the background layer.
View 2 Replies View RelatedI frequently use the BPelt Flatten and Multifill plugins and they have always worked perfectly until today. Now I get the following error: "Could not complete the [Multifill/Flatten] command because of a problem with the filter module interface."
I use Photoshop CS6 Extended with the Creative Cloud membership, and just recently updated to version 13.1.1 x64. I believe this may be related, as the plugins worked before the update and nothing else has changed.
Im makin this home page graphic...and im using a few PS filters. Is ther a way u can put a filter in a new layer on a transparent background so that u can edit it....(emboss....distort it?)
View 3 Replies View Related
