I have the following hardware/software combination: Lenovo ThinkPad W700dsNVidia FX2700M (512MB)Windows Ultimate 64-bitAdobe Photoshop CS4 After installing Adobe, I have been noticing that the text of the menus is cropped (Please check the image below). This makes it very difficult for me to read the menu items (especially when the text is cropped horizontally).
View 4 RepliesI just got a new system with an 80 gig hard drive and 4 gigs of ram, and had my computer person put in the latest and greatest<g>, Vista Ultima, and I've reinstalled all of my programs, including CS3. I work largely in PS (have been since v. 2.5) and somewhat with CorelDraw (because I'm too busy to teach myself Illustrator). <br /><br />Now that everything seems to be up and running, I'm noticing that quite a few of my favorite fonts are no longer on my fonts list. Particularly needed are Germanic-looking ones, which I have used considerably in small amounts, like titles, and had a choice among and still need.
View 35 Replies View RelatedI have Vista operating system and for whatever reason when I try to install new fonts and filters for CS3 they aren't compatible. Is there a patch I can download or do I have to change my operating system back to XP?
View 7 Replies View Relatedi have a new HP Pavilion laptop with Vista Home Premium.
the problem is that the screen contrast is very low.
there are no hardware controls to adjust this.
so the only solution i could think of is to "install" Adobe Gamma Loader.
i did this by copying the files from my WinXP machine and put it into the Common Files folder into my Vista laptop.
i also put a shortcut in the Startup folder.
now here is the strange part...
when i boot up the laptop, Adobe Gamma Loader loads up for about 10 seconds, then it unloads.
i have to manually click on the Gamma Loader shortcut in order for my screen to remain adjusted.
how can i get the Gamma Loader to stay loaded?
also, there is Adobe Gamma Loader isnt listed in the Control Panel, like it is in XP. though i suspect the reason for this is because i copy and pasted it to the Common Files, rather than installing it Photoshop or Illustrator. can someone confirm this for me?
I recently upgraded to Windows Vista. Adobe Photoshop 3.0 was installed on my prior Windows XP version but did not transfer over to Vista so many of my photos on my hard drive I cannot open.
#1: Is there driver software that I can download so that I can install Adobe 3 or do I have to buy new Adobe software.
#2: If I do have to buy new software, will I beable to open the pictures that I cannot open.
I'm using white text on a colored background and Helvetica 65 (T1 font) is coming out very pixelated. I haven't messed around with the color profile or changed any of the settings, so it shouldn't be doing this.This is not good. I have Vista on my laptop and Windows 7 on my desktop at home, it has not done this on my desktop, so maybe it's a Vista issue. Nothing surprises me when it comes to Vista anymore.
View 1 Replies View RelatedWanting add a font to X3 using Vista I've downloaded, extracted  but does not see it  in X3 so how do I get into X3.Looked in archives for same but no find,  stuff like adding  in bullets is all, finding using Ctrl+F11.
View 5 Replies View Relatedi use Adobe Photoshop CS5.1 and i know that it's possible to add some fonts on it. I've downloaded them but don't know where to put them, i can't find the "Fonts" folder in Adobe folder. Also i want the font that is on this website: URL....
View 1 Replies View RelatedI just got suitcase, the font manager. I dont know how to get the fonts from suitcase into Adobe Photoshop CS.
View 2 Replies View RelatedI am trying to work with my previous Photoshop files I created last night on CS5.5 and Suitcase Fusion 4. All my loaded and active fonts are not active in Photoshop. How do i get my fonts to be activated in my adobe applications?
View 8 Replies View RelatedWhy can't I use Vietnamese fonts with Adobe Elements 10
View 3 Replies View RelatedSince applying the latest Microsoft updates to XP/SP3 last week I can now no longer add Open Type 1 or Type 1 fonts to Fonts in Windows, and therefore can't add more fonts for use in Photoshop CS3. I tried a new hard drive, reloaded with XP/SP3 plus updates and the exact same thing occurs. Any of those types of fonts I try to add come up as corrupt/can't load, when in fact they are not corrupt and the exact same font files load with no problem in another XP/SP3 machine that hasn't had the updates applied, and they also load without a hitch in a Vista machine. Anyone else, who has all the updates installed noticing this? Anyone have a solution? I know that this isn't exactly 100% related to Photoshop only, but it does affect the program.
View 1 Replies View RelatedI have a couple of Adobe Post Script fonts installed using Adobe Type Manager. I'm using Windows Vista Enterprise. First of all, is this C:PSFONTS and C:PSFONTSPFM the correct location for Adobe fonts under Windows Vista? I just installed about four Adobe post script fonts using Type Manager and it does not show up any of Adobe's product including Photoshop and LiveCycle. I also went back into Adobe Type Manager and look at the fonts that I just installed under the Fonts tab and I could not find it.
View 2 Replies View RelatedI tried to install Photoshop 7.0 on my laptop with vista home premium. When Photoshop was almost installed, the setup said he was ready but the setup screen didn't went away. I closed the screen.
when I tried to open Photoshop then, the program starts normal but before you can do something there's a report saying: 'couldn't execute your request because of missing or invalid personalisation-information' (this is not perfect because I tried to translate it from dutch)
So, the program doesn't start. After this, I tried to remove Photoshop from the laptop but he says there's a log error and they can't remove Photoshop.
I have consequently a program that doesn't work and that I can't remove.
Is there a solution?
When I installed Photoshop I used another name than the name of the computer, maybe vista doesn't accept this? Normally, you can do that, but I didn't do something like that on vista. If that's the problem, how can you change that name if the program doesn't start normally?
I cannot access my fonts menu. The drop down menu is blank box and snaps shut. I also have trouble with "save as" and file format...ie save as jpg...the drop down quickly snaps shut, I can often catch it after several tries but seriously lol.
These issues have something to do with user settings...I made a secondary account and the program works fine but changing between accounts is not the best solution. Where/what I need to look at in user settings ?
I just purchased, downloaded and installed PSE 12. I am running Windows 7. Everything seems to be working fine. My question is this: Why are the titles in tlhe menu bar (task bar?) at the top so small? When you actually pull down the menu it is fine but the titles (file, edit, image, filters etc) are extremely small and very hard to see. Also the path selection tool is just a dot (actually two tiny dots) and not the normal cursor arrow.
View 4 Replies View Relatedi have to install photoshop cs6 on a new machine..os windows 7 64bit the installation gives me some options
Â
1) install 64bit and 32bit or only 64bit
Â
2) extra fonts
Â
may i ask you a explanation?
Â
1) install 64bit and 32bit is for old plugins compatibility?
Â
2) does the installer store the extra fonts in the adobe folder? i mean does photoshop share these fonts with windows or are used only by photoshop.
I have the Adobe Font Folio (Open Type) but I don't know where to start. I do a lot of small ads and so I use a lot of small type.
Does anyone know which fonts in this pack are good for small type? Maybe something thick that will look better at a smaller font size.
I've tried going through the fonts by highlighting the font name in the box and using the arrow keys to rifle through them, but as you know, it highlights what's on the page, making it near to impossible to see how the font would actually look if it weren't highlighted.
ttf files into the windows/font folder like everybody says, but they wont appear in the font select menu. I've tried closing and opening photoshop, and I've tried uninstalling and reinstalling photoshop, AND uninstalling and reinstalling illustrator just to make sure, but to no avail. They all appear in the font folder, but photoshop will not recognize them. Furthermore, I've been able to add new fonts in the past, they display in the font menu just fine...but not the ones I recently tried to put in. What's going on here? Are there more than one kind of .ttf ? Is there a way to force photoshop to look at the font folder?
I've been tearing out my hair, trying to do this for hours...
I am creating a document in Tamil. Normally I type in Google document. Then copy and paste in Word. It works perfectly.
Â
Now I am creating a poster in Adobe illustrator. I did type in google and pasted in notepad. It works perfectly.
Â
When I copy and past in Adobe Illustrator the font is not displaying correctly.                   Â
Â
In preferences-->Type-->Text Engine options I selected 'Middle Eastern', previousy it was 'East Asia', after that the Tamil letters are getting displayed correctly.
 Â
I have seen another post which says I need to enable show Indic option. [URL] Unfortunately I do not have Indic option. My screen looks different
Â
I have some tamil fount installed. When I tried to change the fount to tamil font, it does not work either. I have another font called Latha. When I changed to Latha font the character displayed in Tamil but all spelling went wrong in Tamil.
Is it possible to edit TrueType fonts with Adobe Illustrator?
View 3 Replies View RelatedWhy the fonts used in a document are not present in their variant in the top of the menu fonts
Only the police group is present. You have to scroll to find the font variant font used in the document!
Is there any way to make this scroll bar appear? I can't each time try font by font to find the suitable one.
View 13 Replies View RelatedI was working on a project and went to change to a different font and all that was there are the last 6 or so that I used. When I go to the drop down menu It doesn't show any other fonts. I know there are a lot of fonts in the computer but cannot get them on the program.
View 7 Replies View RelatedWhen designing a sign for a customer, I take a photo of the existing signs, place on a new document in illustrator cs6, type text then scroll through the text character drop down menu to match the new sign text to the font that is currently on the customers signs, business card etc.
There are many different types of fonts and I would prefer not to have the adobe system fonts, asian, arabic and other fonts that are not used for my purposes.
Â
Is there a way to remove them from this list.
Â
I have tried deleteing them from the window 7 font manager but they are essential system fonts and it displays a message that some programes will not work if I delete them.
Â
I have tried show/hide in the windows 7 font manager but this has no effect on the fonts displayed in illustrator.
Was going to do another round of revisons to some ice cream labels, this came up while opening 11 flavors. Only came up on one, and is gone now. Seems like the fonts for showing the font technology changed to a font similar to Apple color Emoji, amybe a font in the show package contents.
View 2 Replies View RelatedCan we place a custom menu and commands in Adobe Illustrator and invoke custom actions? The need for us is to call a C# DLL from these menu commands. I see C++ support but none on COM or NET support.
View 2 Replies View RelatedI want to see "resent" fonts when choosing, be able to type letter to get down the list quickly, group similar fonts, etc. Maybe have a magnifying glass attached to cursor to see fonts better.... Why have this not been done?
View 1 Replies View RelatedOnce I installed windows 7, while I WAS using PSE 9, I had the tiny font problem. I stopped using PSE for 2 years. I just installed PSE 11. Though better, the Font is still way smaller than I would like. Maybe it's just tougher for seniors? Can they not make the font adjustable? I was told there is no way to increase the size of the font?
View 4 Replies View RelatedIt used to be that I very rarely used fonts within CS5 but recently I have. I realized that all of the fonts supposedly included with CS5 are not available via my drop down menu.
Â
I then found these fonts in Windows/fonts so I copied all of those fonts into Program Files/Common Files/Adobe/Fonts. These unavailble fonts are now listed in that folder but are still not available via the dropdown menu in PS CS5.
Â
I've recently read that the fonts don't really even NEED to be in the Program Files/Common Files/Adobe/Fonts folder and that PS should actually make all of the fonts in Windows/Fonts available via the dropdown menu. Yes, I have restarted PS after copying the files and also tried rebooting my PC after copying the files. The fonts are still not available via the drop down text menu within PS even though all of them are now in both locations.
I have put some new fonts into C:/windows/fonts and they have come up in other programs e.g. Microsoft office but they are not showing up in photoshop.
i am using vista home premium with SP1 and it is 32bit and photoshop cs4.