how to prevent Photochop from popping up and asking what JPEG quality to save the photo as. I want my action to end by saving the result as JPEG but dont want the interference of the dialog box asking me what quality to save the JPEG.
View 4 RepliesI just tried to create Pdf.
I used high quality jpegs and chose a 100% quality setting and at 300 dpi.
I also chose the same pixel dimensions as the original documents.
But the outcome is blurry - as if the original had been highly compressed. The sum of the sizes of all files is about 40% larger than the final pdf file.
How can I get rid of this compression and create a pdf document whose pages are as sharp and high quality as the original?
I'd like to use the "Jump into Group" feature, but I don't want the background artwork to be grayed, or washed out. Is there any way to disable the default action by AICS 5?
I understand the reasoning, but when working with elements that interact with elements outside the group, the effect is not useful.
I should use the right term… I talking about "Isolation Mode".
I am new to photoshop and am curious to see what quality setting others use when saving photos as jpeg The size difference between saving at 10 and 12 is almost 3 times the size, I see no quality loss when saving at quality 10.
I have some photos that are original size of around 5mb, after editing the photos saving at quality 10 gives a file size of around 5mb while quality 12 a file size of around 12mb-15mb.
I'm in the process of cropping 5000 family pictures. They were all scanned on a flatbed with about 4 pictures per scan. I've realized that the cropped pictures are much larger in size than their original counterparts.
For example 45 of the original scans are 27MB in size, while those same pictures cropped (157 of them) are 156MB in size.
My action automatically saves the images at the maximum JPEG quality of 12. I'm wondering what the lowest i can lower the quality to is, while preserving the original scan quality of 300DPI?
I am trying to save a psd picture 125x500 picture. It is a simple gradient with nothing else in the picture. The psd saves with good quality. As soon as I save for web or even save as a jpeg or gif the quality is junky. Even with the jpeg file at maximum and not optiized there are chunky vertical lines. How can I fix this? The psd file is like 138k, but I can't save it more than 12k as a jpeg or gif.
View 3 Replies View RelatedI have 300dpi color images. Some have cloud with blue sky in them. When I look at them on the monitor they look fine. But, when printed on a color laser printer the sky has a somewhat orange cast. What can I do to fix this, if anything, and get the color laser print as accurate a reproduction of the digital image as possible?
View 2 Replies View RelatedHave a photograph which I have modified in wporkspace rgb/8. Looks great in
Photoshop with the exact colours I want.
If I now save in a jpeg or png format the resulting image is much lighter
and appears to have white speckles.
I then thought I'd try the save for web option and to my suprise I find that
on that screen my Original is not displayed as in my PS main screen but
rather as the pasty looking image I see after exporting.
When saving a jpeg it gives the option of inserting a number on quality. I have mine auto set to 10 but I have no idea whether 1 is better or worse or what number I should be putting in to preserve the original quality?
View 6 Replies View RelatedI have been told that when sending my JPEGS to my PRO lab that I can save them with a JPEG image quality of 10 instead of the maximum of 12. They say that there is no difference in the 10 versus the 12 in print quality. Is this true or are they just telling me this to save capacity and space on their server? The bulk of my print sizes are in the range from 4x6 to 8x10. Why are there 12 quality options to choose from? What are the differences from low, medium, high and maximum?
View 9 Replies View RelatedWhat is the best way to achieve lossless JPEG quality in Photoshop? Is setting the quality of the file to "maximum" essentially lossless? I've been using .png files a lot more, but some of my clients still don't welcome that format.
View 9 Replies View RelatedIs there anyway to suppress or disable the save as jpeg options dialog box on individiual images/pictures?
View 1 Replies View Related when saving an image as a JPEG I would click "Save As", select my folder and the Image Quality dialog box would pop up and I would then select 12/Maximum as the image quailty and hit "OK". Thereafter, every time I saved an image, Photoshop applied the same settings as the previous save i.e., 12/Maximum was pre-selected and I would just hit OK and move to my next image.
However, since yesterday Photoshop is no longer pre applying the last setting used and is defaulting to quality 8/High every time. Si everytime I save, I am now having to slide the slider to 12 which is kind of interrupting my work flow.
I have tried delete my preferences settings in the hope that this glitch would be fixed by resetting the program, but the problem persists.
In relation to Photoshop, in the status bar at the bottom it displays what it calls “document sizes”. How to clarify can this be used to determin the quality of a jpeg file ?
For example if I open up a jpeg with no compression (file size on disk is 4.57mb) it displays Doc:34.5M/34.5M however if I open the same file with compression set at 5 (file size on disk is 748kb) and ‘document size’ doesn’t change. How does the document size relate to jpeg compression etc...?
I am a little bit lost when reading discussions regarding the best way to have photos accepted by Istockphoto. They are extremely demanding about the quality of the pictures and they accept zero artifacts for example.
I read that any corrections made of a RAW picture in Lightroom 4 must be very minimal (almost no correction for saturation, vibrace, exposure, and sharpening, noise etc.).
In this case it would mean that Lightroom is of no use and whay not use directly Photoshop CS6 to convert the RAW photo into a high quality JPEG. If this is true, what are the best settings in CS6 to convert a RAW photo into a JPEG format ?
I used CS2 to edit my photos but I notice that when i flatten the image and save it, the images saved has some quality loss in it. It really has started to annoy me and I cnt edit my images. Please tell me a way to reduce this quality loss. I have to save the images in JPEG as I have to post them on the internet.
and i hv also noticed that sme colors change when i save the image..like the saved image is a bit darker than what i see in photoshop...
When I export a Web JPG from GIMP and it offers me a sliding Quality barthat goes 0 - 100. I want to know if that's an equivalent to the similar JPG quality setting in Photoshop? The reason I'm asking is that my research on Photoshop indicated that JPG output quality settings above 75 were"theoretical." In other words, there might be measurable improvements inJPG quality past 75, but they will be imperceptible by the human eye. If the Quality settings are basically the same in both pieces of software?
View 4 Replies View RelatedThe "Quality and Media" setting is missing from the print dialog box using Illustrator. It's there in Acrobat. How do I fix it?
Adobe Illustrator CS 5 Mac OS X 10.7.4
I have had no trouble in the past using automate/batch to change images from jpeg to tiff and back again. For some reason this last set of images will not transfer. Everything I have done to the images has taken twice as long as usual, even simple things like just getting the image to show up (they are all tiffs now). When I finally got everything fixed up I went to change the folders from tiffs to jpegs.
 What happened is that the first image would change over then each successive one would overlay the one before it. So I could have ended with a "deck of cards" on the screen but nothing in the new folder I had created. I need to get these to a pr person asap but can't send a ton of CDs that the tiffs would take up.
I am trying to create an action that will, take the photo i am working with, change from 16 Bit to 8 Bit, and then save as a jpeg in the folder that the RAW file is saved. I have tried to set it up but i cannot figure out how to make the photos save in the right folder. i.e they always save to the folder that was used during the recording of the action.
View 2 Replies View Relatedhave a new Nikon Camera. using flash taking photos inside. For some reason the Histogram on the back of the camera is short of any light pixels, ie they're all grouped in the dark to centre of the histogram, ie the photos are dark. Thing is they look great on the back of the LCD screen and it seems the photos are correctly exposed.
Okay here is the question, does Photoshop have any settings at all, anywhere, which could give the user flexibility in altering any brightness settings when files from a digi camera are imported? I'm thinking a setting for import in photoshophas may have been set too low, hence a dark photo, because the difference between the back of the camera and the image popping up in Photoshop is massively different.
I'm assuming that it's no, so I can rule it out and concentrate on what Nikon have to say.
From what I can make of it, lossy is the option on GIF files, and therefore I am assuming that the optimisation is lossless for a JPEG at 100 percent quality and lossy when the quality is reduced?I just want to clarify that I am saving images for the web at the smallest size I can without losing too much quality.
All the images I save are 450px wide @ 75 dpi, but vary in length from 800px high to 1500px high, but have to be saved under 100kb. lossless and lossy in JPEG format in save for web?
When saving a file and or "Save as Copy" , we get a popup box to choose the location of our file.
After doing this we get "JPEG Option"
My question is about this JPEG Option. I wish to know if I can default this setting so it won't pop up evertime I save a file.
I've been using Photoshop for about 10 years now and I never realized how I get to perform 2 action rather then 1 when saving a file.
I wish I could default the JPEG options , because I always leave it on the same settings anyway.
I would like to modify the Quality setting shown in the "Shaded viewport options" section of the plot dialog box (see attachment). The default appears to be Normal, and the options are Draft, Preview, Normal, Presentation, Maximum, and Custom. I want to use Maximum for 11x17 PDF files but I have 1000's. I can't open each file and change the setting, and then Apply to Layout. I'd also like to know what "Custom" means, but I will settle for maximum for now.
Is this option available under PlotSettings somewhere?
I wish to diable JPEG export preview...How?
View 3 Replies View RelatedI am trying to create a simple action/droplet that will open a bunch of PDF files and make them a certain resolution on the open and then save as jpegs to a particular file. The problem is, when I create the action, the first step, when I open the PDF file, whatever name was in the name box, is it??? Every new PDF opens with that same name and overrides the next one.
Is there a way to tell Photoshop to pick the current name of the file opening and not use the one that was the original file that the action was created from?
how to change the default setting under Jpeg options when saving changes, at present its ticked for Qulaity 12 Max but we want it on Quality 8 high and its a real pain having to change this setting every time we edit an image.
View 7 Replies View RelatedHow can I set the Instant Fix mode to save as maximum JPEG image quality?
View 1 Replies View RelatedIf I have a 10 frames long clip and a 20 frames long clip for compositing, and with those clips, I wanna set the 10 frames long clip moved 5 frames in Action, How can I do it without Slip and Transparency options? I tried to find the way from Animation tap, but I could not.
View 3 Replies View RelatedListing on ebay some clocks i do, looking at the latest requirements. They want a jpg image 1600 pixels on the longest size, ok its big but fair enough.
They also want it to be 90 on the 0-99 JPEG quality scale. Someone has shown me that scale in Ifranview but where do i find it in Corel Draw X4 blowed if i can find it, I don't really want to add another program just to sort this out, i am confident Corel Draw X4 can do it.
I'm using LR4.1 on Windows 7 64-bit and I'm running into something quite annoying; When I open a jpeg image in an external editor (in my case Nik Software Editors) and I choose to " Edit a copy with Lightroom Adjustments" and JPEG file format I end up with a much smaller size, lower quality file before it's even saved by the external editor. I can't seem to find any settings for the jpeg quality and I'm starting wonder if I'm missing something big here...
I have dug through the forums and google searches with no luck. I do prefer to work with RAW but some of the cameras I use only output JPEG and I don't want to make unecessary conversions to TIFF.