Photoshop :: Convert To Png Or Jpeg Quality
Mar 23, 2008
Have a photograph which I have modified in wporkspace rgb/8. Looks great in
Photoshop with the exact colours I want.
If I now save in a jpeg or png format the resulting image is much lighter
and appears to have white speckles.
I then thought I'd try the save for web option and to my suprise I find that
on that screen my Original is not displayed as in my PS main screen but
rather as the pasty looking image I see after exporting.
View 9 Replies
ADVERTISEMENT
Feb 20, 2013
I am a little bit lost when reading discussions regarding the best way to have photos accepted by Istockphoto. They are extremely demanding about the quality of the pictures and they accept zero artifacts for example.
I read that any corrections made of a RAW picture in Lightroom 4 must be very minimal (almost no correction for saturation, vibrace, exposure, and sharpening, noise etc.).
In this case it would mean that Lightroom is of no use and whay not use directly Photoshop CS6 to convert the RAW photo into a high quality JPEG. If this is true, what are the best settings in CS6 to convert a RAW photo into a JPEG format ?
View 1 Replies
View Related
Mar 4, 2013
I am new to photoshop and am curious to see what quality setting others use when saving photos as jpeg The size difference between saving at 10 and 12 is almost 3 times the size, I see no quality loss when saving at quality 10.
I have some photos that are original size of around 5mb, after editing the photos saving at quality 10 gives a file size of around 5mb while quality 12 a file size of around 12mb-15mb.
View 9 Replies
View Related
Dec 9, 2002
I'm in the process of cropping 5000 family pictures. They were all scanned on a flatbed with about 4 pictures per scan. I've realized that the cropped pictures are much larger in size than their original counterparts.
For example 45 of the original scans are 27MB in size, while those same pictures cropped (157 of them) are 156MB in size.
My action automatically saves the images at the maximum JPEG quality of 12. I'm wondering what the lowest i can lower the quality to is, while preserving the original scan quality of 300DPI?
View 8 Replies
View Related
May 10, 2004
I am trying to save a psd picture 125x500 picture. It is a simple gradient with nothing else in the picture. The psd saves with good quality. As soon as I save for web or even save as a jpeg or gif the quality is junky. Even with the jpeg file at maximum and not optiized there are chunky vertical lines. How can I fix this? The psd file is like 138k, but I can't save it more than 12k as a jpeg or gif.
View 3 Replies
View Related
Jun 22, 2008
I have 300dpi color images. Some have cloud with blue sky in them. When I look at them on the monitor they look fine. But, when printed on a color laser printer the sky has a somewhat orange cast. What can I do to fix this, if anything, and get the color laser print as accurate a reproduction of the digital image as possible?
View 2 Replies
View Related
Jun 9, 2006
When saving a jpeg it gives the option of inserting a number on quality. I have mine auto set to 10 but I have no idea whether 1 is better or worse or what number I should be putting in to preserve the original quality?
View 6 Replies
View Related
Oct 16, 2006
I have been told that when sending my JPEGS to my PRO lab that I can save them with a JPEG image quality of 10 instead of the maximum of 12. They say that there is no difference in the 10 versus the 12 in print quality. Is this true or are they just telling me this to save capacity and space on their server? The bulk of my print sizes are in the range from 4x6 to 8x10. Why are there 12 quality options to choose from? What are the differences from low, medium, high and maximum?
View 9 Replies
View Related
Apr 25, 2008
What is the best way to achieve lossless JPEG quality in Photoshop? Is setting the quality of the file to "maximum" essentially lossless? I've been using .png files a lot more, but some of my clients still don't welcome that format.
View 9 Replies
View Related
Mar 20, 2012
when saving an image as a JPEG I would click "Save As", select my folder and the Image Quality dialog box would pop up and I would then select 12/Maximum as the image quailty and hit "OK". Thereafter, every time I saved an image, Photoshop applied the same settings as the previous save i.e., 12/Maximum was pre-selected and I would just hit OK and move to my next image.
However, since yesterday Photoshop is no longer pre applying the last setting used and is defaulting to quality 8/High every time. Si everytime I save, I am now having to slide the slider to 12 which is kind of interrupting my work flow.
I have tried delete my preferences settings in the hope that this glitch would be fixed by resetting the program, but the problem persists.
View 5 Replies
View Related
Sep 20, 2012
In relation to Photoshop, in the status bar at the bottom it displays what it calls “document sizes”. How to clarify can this be used to determin the quality of a jpeg file ?
For example if I open up a jpeg with no compression (file size on disk is 4.57mb) it displays Doc:34.5M/34.5M however if I open the same file with compression set at 5 (file size on disk is 748kb) and ‘document size’ doesn’t change. How does the document size relate to jpeg compression etc...?
View 9 Replies
View Related
May 8, 2009
how to prevent Photochop from popping up and asking what JPEG quality to save the photo as. I want my action to end by saving the result as JPEG but dont want the interference of the dialog box asking me what quality to save the JPEG.
View 4 Replies
View Related
Oct 15, 2007
I used CS2 to edit my photos but I notice that when i flatten the image and save it, the images saved has some quality loss in it. It really has started to annoy me and I cnt edit my images. Please tell me a way to reduce this quality loss. I have to save the images in JPEG as I have to post them on the internet.
and i hv also noticed that sme colors change when i save the image..like the saved image is a bit darker than what i see in photoshop...
View 1 Replies
View Related
Oct 17, 2013
From what I can make of it, lossy is the option on GIF files, and therefore I am assuming that the optimisation is lossless for a JPEG at 100 percent quality and lossy when the quality is reduced?I just want to clarify that I am saving images for the web at the smallest size I can without losing too much quality.
All the images I save are 450px wide @ 75 dpi, but vary in length from 800px high to 1500px high, but have to be saved under 100kb. lossless and lossy in JPEG format in save for web?
View 2 Replies
View Related
Nov 22, 2012
How can I set the Instant Fix mode to save as maximum JPEG image quality?
View 1 Replies
View Related
Jun 26, 2013
How do I convert my cr2 image from camera into a jepeg to send online without losing the color and quality of the cr2 image? Mine gets really bad when I convert to jpeg. Can I size a cr2 also?
View 4 Replies
View Related
Jan 29, 2014
I have a photocopy of a newsprint photograph...
I know I can use BLUR etc to convert it to photo print quality, but am unsure of the steps...
View 2 Replies
View Related
Jul 7, 2013
Listing on ebay some clocks i do, looking at the latest requirements. They want a jpg image 1600 pixels on the longest size, ok its big but fair enough.
They also want it to be 90 on the 0-99 JPEG quality scale. Someone has shown me that scale in Ifranview but where do i find it in Corel Draw X4 blowed if i can find it, I don't really want to add another program just to sort this out, i am confident Corel Draw X4 can do it.
View 8 Replies
View Related
Sep 10, 2012
I'm using LR4.1 on Windows 7 64-bit and I'm running into something quite annoying; When I open a jpeg image in an external editor (in my case Nik Software Editors) and I choose to " Edit a copy with Lightroom Adjustments" and JPEG file format I end up with a much smaller size, lower quality file before it's even saved by the external editor. I can't seem to find any settings for the jpeg quality and I'm starting wonder if I'm missing something big here...
I have dug through the forums and google searches with no luck. I do prefer to work with RAW but some of the cameras I use only output JPEG and I don't want to make unecessary conversions to TIFF.
View 5 Replies
View Related
Jun 11, 2008
I have a free trial version of Adobe Photoshop CS2 and for some unknown reason when I open a PDF file Photoshop is reading it as a Bitmap Image and when I go to save it as a JPEG it will not let me.
View 1 Replies
View Related
Jun 2, 2012
I'd like to convert my file.ai to file.pdf in high quality. It is for a professional printer.(I have the CS5.5 complet with Adobe Acrobat Xpro and Illustrator.) I choose the parameter "high quality" and I save my file to pdf.
So I obtain my pdf with a beautiful image but a bad quality for one part of my text.
View 1 Replies
View Related
Aug 13, 2012
I have cs5 and I have a whole bunch of old tiff's and I want to convert them all to jpeg's...is there a way I can do a mass conversion from one to the other. Also I want to change pix size and resolution. If so how do I do it?? I know it can be done on Elements, if I can do it on that then there must be a way to do it on cs5.
View 8 Replies
View Related
May 29, 2012
Years ago I scanned old family photos using Adobe Photoshop and saved them as pdf files. Now I don't have the software to open them. I've read online that I may have success if I download software called Image Converter Plus. Should I go that route or will today's Adobe Photoshop software convert them? I currently do not own any of the Adobe products.
View 4 Replies
View Related
Aug 8, 2012
I opened a JPEG image, it was all b&w and I used layers/curves to add color to certain parts of the pic. It saved as a psd automatically now I can't get it to convert so I can upload the image, I've looked up all kinds of things to try and it's not working.
View 36 Replies
View Related
Aug 15, 2004
I have a jpeg that has a white background. I want to remove teh white background so I can drag the jpeg into a layer on another iamge. I tried using the magnetic lassoo tool but it didnty come out all that good. I remember when i used to use Paitshop pro you could choose a colour in an image that you would like to make transparent. Can something like this be done in PS?
View 3 Replies
View Related
Mar 13, 2013
Can I convert RAW .ORF to JPEG with PSE 11 ?
View 4 Replies
View Related
Dec 14, 2013
Is there a link update for PSE 9 to convert raw images to Jpeg.
View 1 Replies
View Related
Jun 16, 2013
I am using pse9, I resized photos with Perfect Resize and they are now in psd files. I copied them to a flash drive and tried to move them to a converter, but the converter does not recognize them.
View 1 Replies
View Related
Sep 29, 2010
I am using VS Pro X2. There is a problem with batch conversion. When I export the videos individually using "share", I get a good quality output, but when I export the same video using "batch convert", the quality degrades, for example the title gets blurry. I am using the exact same output setting in both situations:
MPEG-4 Files
24 bits, 640 x 480, 30 fps
Frame-based
MPEG-4 SP Video: 2000 Kbps
44100 Hz, 16 Bit, Stereo
MPEG AAC Audio: 128 Kbps
View 5 Replies
View Related
Oct 18, 2013
How to Convert a Kodak.PCD file from a DVD to .JPEG
View 3 Replies
View Related
Jul 11, 2013
I want to convert a large tiff(490MB) into a JPEG in Photoshop with CS5. The "save as" options don't show JPEG as an option. The image is in 8 bit mode already, and I've tried cmyk and rgb mode. "Save for web and devices" is also not an option. The image is one layer.
View 2 Replies
View Related
