Photoshop :: 5.1 - Cannot Access Edit Function
Sep 30, 2013I still use Photoshop 5. I cannot access the edit function. How do i access edit ?
View 1 Replies
ADVERTISEMENT
Photoshop Elements :: 10 Cannot Access Edit Function Windows 7
Nov 20, 2012I have used Tech Support twice in past 4 months trying to get the Edit function to work. Have reinstalled program twice from an On-line download license. When attempting to open EDIT, the system either cycle for 30 seconds and then simply disappears, or a pop-up appears "PSE 10 has stopped working" and cycles for 30 seconds and then closes the program.
View 1 Replies View RelatedPhotoshop :: How To Access Edit Original (edit With) Option To Edit Photo That Has Not Been Edited
Sep 3, 2013I am trying to access the edit original (edit with) option to edit a photo that has not been edited yet. I right click and go through the edit menu and does not appear or is not available? Would I have to reopen it manual in photoshop or is there a way around this to access that setting? it sometimes does not appear on my already edited photos.
I would prefer not to open each photo again, as some files i do not have and were imported into the document with another computer.
Photoshop :: Unable To Access CC 3D Function
Oct 19, 2013I have a problem with Photoshop CC and the 3D functions. I cannot access them in any way. I cannot choose them in any menu, like they aren't in the software. In the options i activated 3D and so on, but it still isn't there.
I have an integrated intel hd graphics family... is that the problem?But i can use high end programs like cinema4d without any issues. So whats going wrong Photoshop?
My system is running windows 7 64 bit, photoshop is 64 bit version too.
Edge Animate CC :: Access Element In Parent Document From Function?
Apr 5, 2013Very, very new to Edge Animate.
I want to know if I can access elements in the parent document from the Function I attach to the Stage or other element within my animation.i.e. the equivalent of window.parent.document.getElementById
I notice that the function automatically passes 'sym' which I'm guessing is the animation document reference so can I get to sym.parent?
Photoshop :: Edit Transform Function
Jan 20, 2005My digital camera has a tendency to distort as the image nears the outside of the frame. Is there a photoshop function that can correct this? I have tried the Transform functions (skew, distort, etc), and correcting half of the image is easy by dragging the corner grips away from the center to stretch the image, but, when I go to the opposite end of each given side, the distortion returns. The problem is the grip at the midpoint on each side moves with the rest of the side when using this feature. Is there a transform feature or other command that does something similar, but the midpoint grips stay stationary, basically taking the rectangular shape of the image and making it into an hourglass or four pointed star?
View 1 Replies View RelatedPhotoshop :: Cannot Access Edit Workspace
Oct 2, 2012I cannot access the edit workspace. I get an error message saying it's an invalid address. This just happened today and I don't know why. It is an old program.
View 9 Replies View RelatedPhotoshop Elements :: How To Unlock (Edit In Progress) Function
Aug 21, 2013Cannot get out of it in fix or organize.
View 1 Replies View RelatedVideoStudio :: Edit Colours Function
May 25, 2011I'm a Corel VideoStudio X4 user and I have recently noticed a small problem. Every time I am trying to copy a color in the font area (Edit Colors) and keep it for later on (color pick function), I get no luck with it. The color does not stay in the box (add for custom colors).
View 2 Replies View RelatedIllustrator :: How To Use The Edit Original Function
Feb 26, 2011I want to use the "edit original" function inside illustrator, so my picture will open in photoshop, and the changes I make there will be saved in Illustrator. But when I choose edit original it opens paint - how do I change this? And yes I have checked the link-box when selecting the image. I have windows 7 if it matters.
View 8 Replies View RelatedCorelDRAW X5 :: X6 Killed Edit Bitmap Function
Apr 13, 2012After Installing Corel X6 I found it's no longer possible to edit bitmaps directly from CorelDraw X5. I uninstalled Photopaint X5 but that didn't work. I checked the filetype and made sure that cpt files were opening with Photopaint X6 but Edit Bitmap remains greyed out in CorelDraw X5. Is this because X5 is 32 bit and X6 is 64 bit? I still need to use X5 because various macros don't work with X6. How can I get Edit Bitmap to work both in Draw X5 and Draw X6?
View 1 Replies View RelatedLightroom :: Edit In CS5 Function Does Not Carry Over All Adjustments?
Dec 8, 2011LR 3.3 with ACR 6.3
After selecting "Edit in CS5" I do not get the dialogue box asking if I would like to apply Lightroom adjustments.
Image opened in CS5 includes some adjustments from the Develop Module, but not the Transform Lens Corrections that I had applied.
Lightroom :: Edit In Function Doesn't Connect With PS CC?
Feb 6, 2014Since i have updated to PS CC en Lr5.3 the edit in function in Lightroom doesn't function properly. Or sometimes not at all. I removed the adobe plist files. And then it will work. Accept when I restart the computer the next day. The problem keeps comming back! The operating system is Apple mavericks.
View 4 Replies View RelatedLightroom :: No Watermark Function Under Edit Drop Down Box In V3.4
Apr 30, 2013There is no Watermark function under the Edit drop down box in my Lightroom v 3.4 How do I get it to appear so I can use it?
View 4 Replies View Related3ds Max Modeling :: Collapse Function Broken In Edit Poly Mode
Dec 19, 2013Whenever I try to collapse a group of edges in Edit Poly mode there is always 1 edge that is left intact therefore creating undesired results. This doesn't happen in Edit Mesh mode, and also behaves accordingly in previous versions of Max.
Currently using Autodesk® 3ds Max® 2014 Version 16.0 commercial
Mesh mode example:
Specs:
Autodesk® 3ds Max® 2014 16.0 SP3 commercial
Windows 8.1 x64
Nitrous (Direct 3D 11.0 Feature Level 11 - NVIDIA GeForce GTX 780)
AutoCAD 2010 :: How To Access Dialog To Edit Image
Mar 25, 2012In previous version of AutoCAd 2008 (or earlier) the images dialog to edit the images (i.e., brightness, sharpness, etc, it has been a long time and I forgot what they were, but they were there and with many options) was obvious, versatile, and very easily found then, but I could not find it in AutoCAD 2012.
how to get it in AutoCAD 2012?
Xara :: Can't Access Dialog Box Because Edit Brush Button Is Greyed Out?
Jun 1, 2012I'm using P&GD2013. I draw with a wacom tablet and use the freehand brush tool in sketch mode with pressure enabled. I want to edit the properties of the brush . The help pages are quite clear except that I can't access the dialog box because the 'edit brush' button is greyed out.
View 2 Replies View RelatedCorelDRAW Graphics Suite X6 :: Edit Bitmap Menu - Unable To Access?
Apr 1, 2012The tool now appears to be greyed out , have done file repair each time , but only lasts a few goes then goes back to greyed out state.
It is impossible to get anywork done because of this bug.
As an emerbgency have had to go back to X5.
Also serial number does not work in Website Creator X6 ... more bugs.
AutoCAD Architecture :: How To Access And Edit Attribute Data Of Sub Blocks Inside MVB
Mar 26, 2011Seems like Multi-View Blocks are like that hot red-head in high school that you really want to get to know until you get to know them.
I made a bunch of blocks for my electrical plans. Annotative symbols for plan view, 3D blocks for model view, and elevation blocks for elevations. I then started creating the MVBs.
Upon insertion the annotative blocks appear super small and the model view blocks scale way up. The model view blocks are not annotative and are not supposed to scale at all. It seems MVBs see any block inside that is annotative as an indication that the entire MVB shall be annotative. Fustrated, I finally found a work-around that is a bit half-arsed:
I made another block as a sort of holder for the annotative symbols that was set to not be annotative and inserted that into the MVB. VOILA! the MVB itself doesn't scale, but the annotative symbol inside the non-annotative block does. This works fine except for one caveat: I can't edit attributes that are in blocks inside of blocks. If I made another block to use in the MVB for the attributes, it would work, so long as I don't make it annotative, which isn't what I want.
So, A) is there a better work-around than the block-in-a-block-in-a-multi-view-block method, or B) Is there a way to access and edit attribute data of sub-blocks inside a MVB?
Maybe my next thread will be about red-headed Multi-View Blocks with carpets that match the drapes.
Edit: Running ACA 2009
CorelDRAW X4 :: Failed To Launch Server Application / Error When Calling Edit Bitmap - Function
Jun 5, 2008URL.... "Failed to launch server application" when trying to edit a bitmap out of CorelDraw, only later saw that specific post was for X3. I have the same trouble, only with X4.
To recap my problem: When calling the "edit bitmap" function in X4 - I receive this message: "Failed to launch server application". Paint opens, closes, opens, closes and then the message pops up.
I tested several files, different bitmaps, different dpi's, new files with newly converted bitmaps (filled rectangle to bitmap). To no avail.
AutoCAD Civil 3D :: Access File / Edit / View / Insert / Format In Menu Bar
Jun 27, 2011I have just installed C3D 2012 and when I show the menu bar, the only choice is Express which used to be the last tool in previous versions. What happened to File - Edit - View - Insert - Format, etc in the menu bar? I need to access them.
View 4 Replies View RelatedCorelDRAW Graphics Suite X4 :: Failed To Launch Server Application Error When Calling Edit Bitmap Function
Jun 9, 2011complete Corel X4 uninstall 3 times already .... even went so far as to reboot the registry to a date before I installed Corel X4 Suite to no avail.
The program has had no issues until the last 2 weeks. The actual issue I am having is Paint works fine as a separate entity however when I try to edit a bitmap from within X4 an error pops up telling me "Failed to launch server application" This is a major PITB as I own a graphics company and this is causing no end of problems
AutoCAD Visual LISP / AutoLISP :: No Function Definition With Distance Function
Oct 25, 2013This seems absolutly silly.
(setq p1 (getpoint))
(setq p2 (getpoint))
(setq Dist (distance p1 p2))
Why does this not work?
I'm trying to build a command to replace AutoCAD's "DI" command, to give distance and delta x, y, and z values in decimal and imperial, and keep the angles in XY plane and out of XY plane.
AutoCAD Inventor :: Passing A Function Name To Another Function
Nov 13, 2012I'm trying to be able to have a function run another function with the secondary function being passed as an argument to the first. I'm trying to create a recursive function and the recursive part works great. I just need to be able to have the recursive function run other functions to actually do stuff.
Here is something I found that should do what I need, mainly run a function from a function name in a variable.
Sub test() Dim ftnName As String Dim argument As String Dim result As String ftnName = "myFunction" argument = "cat" result = Application.Run(ftnName, argument) MsgBox resultEnd SubFunction myFunction(inString As String) As String myFunction = inString & " has " & Len(inString) & " letters."End Function
However I get the error "object required" on the "result = Application.Run(ftnName, argument)" line. So I'm guessing the Inventor VBA doesn't like this method of doing this. I'm just hoping there is a way to do this or this function will be useless or reduced to hardcoding functions which still defeats the purpose.
AutoCAD Inventor :: Internet Access Is Required To Access
Apr 26, 2012Just loaded 2013. Of course right away I get an error. "Internet access is required to access the Help" Well as you can see I have internet access.
View 4 Replies View RelatedPhotoshop :: Find To Edit Objects Is Through Edit - Free Transform
Feb 27, 2012I am just starting out with the Photoshop CS5 trial. I am trying to apply a triangular pattern to a thin rectangular shape. I used the custom shape tool>triangle, then defined the pattern successfully.However, when I apply the pattern it partially repeats it along the vertical as well as the horizontal axis. Please see attached screenshot:
I only want it to repeat horizontally, what am I doing wrong?
Also, I am Fireworks CS5 user and am really missing the properties inspector panel which allows you to quickly and esily edit sizes of objects, is there a Photoshop equivalent of this?........at the moment the only way I can find to edit objects is through Edit>Free Transform.
Photoshop Elements :: Add Edit With CS5 To Edit With Options?
Oct 31, 2012How can I add "Edit with Photoshop CS5" to the Edit With options?
View 7 Replies View RelatedLightroom :: Prompt Disappeared For RAWs Edit Original Or Edit A Copy?
Dec 16, 2013I'm running on LR 5.3, but this problem persisted in LR 5.2. Working in PS CS6 and Camera Raw 8.3. RAWs are NEFs from a Nikon D600.
I can't figure out what happened but suddenly I am not getting prompts when moving from LR to PS to "Edit Original" or "Edit a Copy".
I reset all dialog warnings and nothing. The prompt will appear for TIFFs but not for NEFs.
It's kind of pointless to not be able to choose to edit an original or copy with LR adjustments for a RAW when they are the file types that retain my RAW editing information.
Plus, when I do click on a NEF and choose to edit in PS without the prompt (it will appear with lightroom adjustments, not as original), it will open a second icon for photoshop on my dock, and prompt me to continue trial? I have a version of PS installed with the serial plugged in, and in LR "edit in PS" for a TIFF will open this primary version.
3ds Max :: Unable To Edit Vertices In Edit Poly Mode
Apr 2, 2012I was trying to play around with the software to get to know it, and... well, I think I made something weird in it. Everything was flowing nicely when I was following the tutorial about Editing Objects: I created a box, I selected that edit poly option from the modify tab and I could edit vertices totally nicely.
But then, I really don't know what happened, but, I don't know exactly when, I suddenly could not move the vertices AT ALL. They are pretty visible, but when I select them, they turn red and the axis are not editable! I'm so confused! I can edit the axis very normally if I'm using an option like Select and Move but... With the edit poly thing I just cannot! I tried everything I thought of: Made a new box, restarted the program, restarted the PC! But NOTHING worked.
EDIT: It took me almost an hour to figure out I wasn’t selecting the Select and Move tool!
Photoshop :: Escape Key Function
Sep 22, 2012I work in AI more than PS, so my habits from AI are hard to break. One interface difference I ran across was the "esc" key functionality. In AI hitting "esc" saves current changes in the symbol editor and moves the user back to the artboard. In PS, hitting "esc" cancels any editing tool, such as "transform" or "Puppet Warp" without saving changes. While the PS "esc" function is probably more appropriate, it is annoying for someone who is used to the AI worflow. Image my frustration when I worked diligently on a "Puppet Warp" session and lost it all by hitting "esc". Noticed this inconsistancy in the two programs?
View 2 Replies View RelatedPhotoshop :: Making CS6 Function Like CS3?
Aug 1, 2013How do I make my CS6 function like CS3? I just upgraded. Every image I have opened is a new window on my taskbar. I open up 50+ images at a time quite often and I just have like 50 little windows on my taskbar. I also hate the tabbed view cause I drag and drop images around on each other all the time.
View 3 Replies View Related