Photoshop :: 3D Objects :: Appear To Pop Out Of The Background
Mar 31, 2007
if there was a way to make objects appear to "pop" out of the background. use the frame to make the object appear 3-d. I'm trying to do that with out the frame. I'm taking a cutout of myself from one picture and putting myself in another background. I want myself to appear to melt into the background, but i want my arm to pop out and look like i'm reaching out. So far, it just looks like 2 images blended together.
View 9 Replies
ADVERTISEMENT
Sep 30, 2012
I have about 125 RAW files of random objects that were shot against an white background in a homemade light box.
My goal is simple, to isolate the objects against a completely white background whilst still maintaining the shadow of the object (if possible). I have been using Lightroom 4 and a lot of brushes to complete such a task, but I know there is a simpler way to accomplish this with Photoshop. I am using Photoshop CS6.
Here are what I think are the three most tricky pictures:
DSC_0733.zipDSC_0749.zipDSC_0778.zi
View 1 Replies
View Related
Jan 25, 2007
I'm using Photoshop CS2 and I need to remove the background from an image which has tulle with many folds, how do i keep the transparency?
View 3 Replies
View Related
Sep 15, 2013
how do I isolate an objects from its background?
View 2 Replies
View Related
Dec 21, 2012
I have photoshop 7 and I wish to remove unwanted objects from photos and replace them with the current background. I have tried to use the healing brush tool , and the cloning tool, but I do not have content aware. How can I replace unwanted elements in my photos with the current background using my version of photoshop. The welcome screen to my edition says it is possible?
View 1 Replies
View Related
Aug 16, 2013
This is a cropped corner of an illustration I removed from its opaque background and placed on a transparent background. The north and west borders show the whilte line that forms whenever I place objects on a transparent background. The south and east borders are the cropped edges -- they are clean and make the trasition from object to background color without that white line. With some objects, it's possible to use the Plygonal Lasso Tool, for instance, and trim that object away from the background. With portraits or irregularly shaped objects, though, it's necessary to use the Magic Wand or other means to trim the background away from the object, which results in that unwanted white line. Defringing, Removing White Matte, Anti-aliasing, trying to predict what color you'll lay the silhouette on and working in that color, and on and on. It seems as though Photoshop would be relied upon heavily by professionals who need to place objects on top of one another without intrusion.
View 3 Replies
View Related
Feb 25, 2012
I often need to remove larger objects like this AC grille sitting on a plain coloured wall:
The brightness of the wall varies over the affected area. There are subtle gradients in both horizontal and vertical direction, so a flat colour fill doesn't work. Content-aware fill produces an unusable patchwork of bits randomly picked up from the surroundings.
So most of the time I've ended up by filling the areas with a flat colour and then using the patch tool repeatedly on smaller overlapping areas to smoothen things.
I'd want an automated way to create a non-linear gradient to match the areas adjacent to the selection.
View 4 Replies
View Related
Dec 16, 2011
I have a drawing of a tennis court that I saved as a jpg. I want to add cones with numbers on them to illustrate where to hit the ball to. I saved the cones as png's so I could make the background transparent. I don't understand how to make the clones of the cones and add them to the jpg of the tennis court.
Should I have saved the tennis court as a png file also? The background doesn't need to be transparent.
View 2 Replies
View Related
May 4, 2012
I have learned basic skills with VS x4, and made a couple of videos with animated stills, and voice overlay, but I want to do something more sophisicated now. I'd like to have either a still or video background, with objects (images or text) "orbitting" over it, that is floating across the screen in a smooth trajectory. Is that possible to do inside VS without a camcorder or other handheld? If so, can you give me a brief description of where to look in the menus, what to do, and I'll work on it from there. I assume it will involve some superimposed tracks. But how can I create objects moving along a smooth path?
View 5 Replies
View Related
Mar 27, 2014
I'm trying to stabilize some footage, but Warp Stabilizer in Premiere Pro CC seems to want to stabilize moving objects in the foreground rather than the background, creating strange effects as you can imagine.
I have seen tutorials on using Warp Stabilizer in After Effects and masking the foreground action to make Warp Stabilizer use the background as it's inputs. Is there a way to do this in Premiere Pro or even something easier (that AE method seems convoluted and some work to do).
View 1 Replies
View Related
May 1, 2011
I´ve a problem with rendering. The background-color gets mixed with the object. I´ve already reinstalled Autocad but it does n´t fixes my problem. What could be the problem?
It looks like this:
It should look like this:
View 6 Replies
View Related
Jun 19, 2012
I have problem with publishing my work in PDF. I have vector background (in thin stripes like) and several polygonal bitmap objects on it but in the PDF-file everything under the bitmap objects is bitmap also... And the stripes (of my background) are very ugly and jagged - part vector, part bitmap...
Could I complete that work correctly in CDR or have to search some other resolution?
View 6 Replies
View Related
Apr 15, 2013
I am currently selecting 10 objects from a picture and then I delete the background. This leaves just the 10 objects of interest in the image.
I have hundreds of these images and would like to compare the number of pixels or diameter of the objects across the images for each of the 10 objects. Is there a way I can automate Photoshop to go through a directory of images and measure the pixels of each of the 10 objects, and then export those measurements to a file?
View 29 Replies
View Related
Sep 22, 2013
Remove the text and the white background and fill it with its respective background ?
View 4 Replies
View Related
Oct 17, 2012
How do I recover a background after accidentally deleting it from the background catalog
View 4 Replies
View Related
Aug 24, 2011
I seem to be having problems when I lasso round a specific part of a photo taken with a white background and then try to add that part of the image to a plain #000000 black background.
I always seem to get a white outline around the image when I place it on the black background, even when its on ZERO feathered. I don't like using feathered as it adds a smudge round the outside of the image.
View 9 Replies
View Related
Oct 23, 2012
I have some text documents in PDF format and would like to edit it in photoshop CS5, but each time I open them up in photoshop, the background seems to be transparent (tiny grey and white tiles), which is very eye tiring when editing/annotating with a wacom pen, how to fill the background total white?
View 2 Replies
View Related
Jan 23, 2004
Im wondering how to texture say a face with a motherboard, so that the motherboard takes the shading and everything of the face.
View 1 Replies
View Related
Aug 12, 2008
I recently saw on TV that someone had 2 nearly identical images - one with just the background, another one from exactly the same point of view featuring an object before the background.
He was then able to subtract the background so only the object in front remained. Is that possible with Photoshop as well? I have version CS3.
View 6 Replies
View Related
Jun 17, 2006
I am using my CS2 on OSX and when I view the image in a full screen mode the color around the image is grey, well it used to be grey but it is blue now. How do I change it back to neutral grey?
View 3 Replies
View Related
Nov 27, 2012
Why combine objects together cut bottom side of combined objects?
system configuration:
Win 7 Pro 64bit, Intel i5-2500, 8 GB RAM, 128 SSD SAMSUNG + 2TB on hard drives.
corel version:
X6 VERSION: 16.4.0.1280
View 14 Replies
View Related
Nov 22, 2012
I am very much new to AutoCad, but have learned quite a bit about it in the last few days. As a part of the learning I have been building a 3D model of the shed my dad is building. But I ran into a problem on the roof and cant seem to figure out how to click everything into place.
My problem: I need to keep the size and shape of all objects while also connecting the objects to the main structure. I need to keep A and B connected to the main structure and adjust the angles so that both meet at C. But if I move one then another moves out of place. (In the pic B is out of place) All I want to do is hold the beams at A and B in their spot while adjusting the rotation on both beams to meet at C all at the same time. I have tried to fine adjust the rotation on the beams individually but still cant get them together. I cant seem to get the constraints feature to work, because I guess it only works in 2D. I have tried to use the align tool but it just throws everything haywire.
View 6 Replies
View Related
Jul 26, 2012
How does one remedy this Adobe error message? "Can't scale the objects. The requested transformation would make some objects too small to use." This one always gets me. I'll spend more time trying to find the object in question. This has happened in almost al versions, but this time it's CS5.
View 3 Replies
View Related
Aug 18, 2011
I often produce graphics in CorelDRAW, export it as en eps file and insert it inside a MS Word document as an image and finally convert it to pdf. This way my vector graphics (often linedrawings with or without fill) usually is preserved in the final pdf document. I can zoom in and the lines keep on displaying perfectly sharp. This is important, since it easily looks bad when thin lines are turned into bitmaps, even when watched from a distance.
Now, in some graphics I created today, I had a circle with fountain fill and outline (symbolizing a sphere) put behind a filled rectangle, which had a uniform transparency applied to it. In the resulting pdf file, the 'sphere' was turned into bitmap. Inside CorelDRAW everything was vector graphics, but something was loast in the process. what happens with the graphics in the different steps in the process and eventually could explain a workaround to make everything look as vector in the final pdf file.
View 14 Replies
View Related
May 9, 2013
I have several .dwg files that I use as templates. I run find and replace VBA routines on the template .dwg files, ie find $Flavor$ and replace it with "Grape", and then I save the .dwg to another directory with a new name.
These VBA routines work well for acdbText and acdbMText objects, but I have a bunch of AcdbAttributeDefinition objects in the .dwg templates as well.
After much research about the AutoCAD object model (I'm mostly a Microsoft Access VBA programmer), I have come to understand that these AcdbAttributeDefinition objects are actually "remnants" of a block that no longer exists in the drawing.
Anyway, I'd like to convert all of these orphaned AcdbAttributeDefinition objects to acdbText objects in the templates and then delete the AcdbAttributeDefinition objects. I have some code that does just that.
However, the issue that I am having with the code is that the newly created acdbText objects are not on the same layer that the original AcdbAttributeDefinition objects were on. I don't know the syntax to identify what layer the AcdbAttributeDefinition object is on or how to specify what layer on which the acdbText object is created.
how to keep the acdbText objects on the same layers as the original AcdbAttributeDefinition objects during the conversion and deletion process?
Here is the code I am using currently:
Sub AttConvert(dwg as string)Dim oDocument as AcadDocumentDim ent as AcadEntityDim aa as objectset oDocument = Documents.open(dwg) For Each ent In oDocument.ModelSpace If ent.ObjectName = "AcDbAttributeDefinition" Then' DO SOMETHING TO IDENTIFY WHAT LAYER THE ACDBATTRIBUTEDEFINITION OBJECT IS ON
' DO SOMETHING TO SPECIFY THAT THAT IS THE LAYER TO CREATE THE ACDBTEXT OBJECT ON Set aa = ThisDrawing.ModelSpace.AddText(ent.TagString, ent.InsertionPoint, ent.Height) End If Next ent For Each ent In ThisDrawing.ModelSpace If ent.ObjectName = "AcDbAttributeDefinition" Then ent.Delete End If Next ent End Sub
View 1 Replies
View Related
Apr 10, 2012
I'd like to know how to align an object in model space with the edge of my viewport in paperspace.
When I draw, I like to lay out multiple complete drawings in model space, make an appropriately scaled bounding box around them, and then snap a view port to the bounding box in my layout. I usually have multiple drawings lined up in a row in modelspace, so when I want a new layout I do a Save As and then pan around in my viewport to find the next bounding box, at which point I have to resize the viewport to get it to snap to the edges nicely. I really want to be able to to it the otehr way around- while panning I'd like to be able to grab a corner of my modelspace bouding box and snap it to the the corresponding corner of my viewport window. That way making new layouts would be a snap. Is there a way to do this in AutoCAD 2012 LT?
View 4 Replies
View Related
May 2, 2013
A user is having problems when using the copy command in AutoCAD 2013.
When they select objects, its not reporting on the commandline how many objects its found or keeping a running total of objects selected. Not even any duplications...
I've tested it on my machine but i cannot replicate the issue and have never come across this before!
Is it a bug? Is it a variable? User setting etc.
View 9 Replies
View Related
Jul 3, 2013
Something changed in my settings & I don't know how to chance it back. I can't click on to select objects inside or behind objects. What do I have to change to be able to select any item I click on regardless of where it is?
View 1 Replies
View Related
Apr 28, 2013
how to edit revit objects in 3dsMax. How do I separate objects to make them individual objects? In other words, when I try to select the roof, I get ALL objects that are "dimensional lumber" i.e. I joists, roof, fascia, etc.
I tried selecting a roof polygon and making a copy and editing it but still when I apply materials to this polygon they apply to all of the dimensional lumber. Probably because I made a copy as a clone but it didn't give me the "copy" option.
View 1 Replies
View Related
Sep 22, 2013
There are 3 elements there. the top of the clap board was placed before i started tryinbg to create the slanted dashes that are on the average clapboards. The white dash was skewed using Object > Transform > Shear. Then i attempted to rotate it to fit.
I need 4 of these skwed white squares / trapezoids on the top along with 4 to match on the top of the larger potion of the clapboard. I do not want to eye it as it will be a part of a logo.
What would be the best method to use?Is there a way to draw the 4 rectangles on top of a perfectly horizontal long black rectangle and skew the white dashes at the same time?Is there a way to skew based on the dimensions of the longer black rectangle?
View 1 Replies
View Related
Dec 22, 2011
I new to 3ds max and watched a bunch of tutorials, but I'm having trouble trying to do something simple like moving one box on top of another box.
For example, I created a table and now I want to create a lamp and put it on the table. Is there some way I can just move the lamp and have it snap to the surface of the table when it's near?
View 3 Replies
View Related
