Paint Shop Pro :: X5 - Retouch Of Photos With Color Disperse Failures?
Jun 24, 2013
I have hundreds of paper based photos, damaged in color disperse caused by a flood in our basement. I cleaned and dried them all, and I made a digital copy with my mobile phone camera. I'm using PSP X5 to resize the photos and I used "intelligent correction" from PSP. Result of copy is now better than the original, but the color disperse is still there, if there is a way to reduce this damage with PSP
View 6 Replies
ADVERTISEMENT
May 8, 2013
I am having a rather strange problem with PSP X14. I will describe my general workflow and where the problem occurs.
I do some editing to my photo and save it as a full size image. Next I resize it to a much smaller version for use online. I have no problems at all with these two steps. Next, I cancel the resized dimensions and resize it again to a file closer to the original size, after I sometimes sharpen it and add a canvas. Many of the thumbnails for this last step have horizontal color bars across the bottom of the thumbnail, ranging roughly from 1/16 to 1/3 of the image size. When I hit on it and open the file, the bar is not there. I tried opening this thumbnail in another photo editing program and when I have access to the thumbnails for opening, that bar is there on select images, and when I open the file, it's gone. Unfortunately I haven't had the opportunity to try printing it yet.
I've been following this basic formula for preparing and editing photos for a very long time and haven't had this problem until recently. And it's random, as not all images have this problem. I tried changing this process and reopening the full size file that has been edited and resize that one, but am getting the same random results. I have no problems with the thumbnails for the full size and the first reduced size images.
I have been a long time user of PSP...since v.7 and upgrade versions regularly. I'm running Windows 7 premium, 64-bit on a laptop with an Intel i-7 processor.
View 4 Replies
View Related
Nov 21, 2011
I'm exporting Tiff Prophoto files from Lightroom into PSPX4 for further processing. The images are 1 to 2 stops under exposed when compared to Lightroom's image.I have selected PSPX4 color profile to match LR export color space.
I have tried exporting the Tiffs as sRGB and adode1998 and still the images are under exposed. I have little knowledge about color management and have searched around the web for possible answers, but no luck.
View 6 Replies
View Related
Oct 18, 2012
For family history purposes, wish to improve the legibility of some hand written 1930 telegrams; the ink has faded with time so I want to change its colour to black. The form printing has not faded.
The user guide draws attention to the fact that the color selected for replacement must be in the image. Using the Dropper tool with sample size 1 pixel I position the dropper where I want it, see the color in the preview window, then right-click and the selected color appears in the background window on the Materials panel. So far, so good. I then place the Dropper tool over black in the swatch on the Materials panel, click and black appears in the Foreground window of the Materials panel. I think I'm set.
When I select the Color Replacer tool the background window immediately reverts to another color, usually white.Incidentally, the user guide suggests you read up on selecting colors with the Dropper; when you do this you learn that its OK to pick colors from the Materials panel.
View 6 Replies
View Related
Jul 29, 2011
Question #1.
Were can I change the "color saturation" to use for my "color changer"?
Question #2.
When using "point-to-point" or "edge seeker", is there a way to go back one or two steps, without having to start all over again?
View 11 Replies
View Related
Aug 6, 2011
I have the paint shop pro x2 and I didn't realize before that when I converted my raw images over to jpeg it took the size down from 8MP to 1MP and my clients want wall photos. I need to know how to maintain the large file size.
View 5 Replies
View Related
Apr 20, 2012
I have a PC. When I try to import photos from my Olympus Ib program I transfer only the JPEGs to my pictures.
How do I transfer my RAW photos to PSP 4x?
I've tried to import then directly from the camera but it doesn't seem to work.
View 3 Replies
View Related
May 15, 2012
I want to use the paint brush for editing a photo I have, but the only color available is black. No matter where I've looked in PSP, there was no option to change the color of the paint brush. I've read online that you need to change the pallet to material pallet, then go to "Foreground & Stroke Properties" and set the color box to the color I want, but the only colors I get are different hues of black and gray.
Even in Paint it's just a matter of clicking the desired color to use different colors. Why isn't it so simple in PSP?
View 3 Replies
View Related
Jul 1, 2011
I just purchced x3 about two months ago and when it starts up there are a bunch of pictures from my computer at the bottom. And I have to click on one of the pictures and then close the picture. I'd rather not have my photos automatically displayed at the bottom of the page at start up. Is there a way to open x3 without the pictures being displayed at the bottom of the screen.
View 2 Replies
View Related
Jun 5, 2011
I'm sure I'm trying to do something fairly basic here but the manual doesn't seem to work for me re canvas re-sizing (unless I'm missing something).
I want to take several images straight from the camera (say 3-4Mb each) and combine them to eventually make a single JPEG. Is this done by resizing canvas? Is it a case of taking one image and resizing the canvas or starting with a blank new canvas?
View 5 Replies
View Related
Feb 23, 2012
i can`t share photos on facebook.it was working ,now it is not working.
View 1 Replies
View Related
Sep 20, 2010
In X2 all I had to do was go to file- either 'twain acquire' or -'from scanner' and my scanner software would open in X2 and i could directly import the scan.
In X3 all the acquire choices are grayed out unless I first choose, file- new, and then a dialogue box for size options opens.Once I have a new (empty) file on the editor screen I can then acquire . Is this a new change in X3 ?
View 7 Replies
View Related
Jun 16, 2012
I'm using Paint Shop Pro X2. Within the past 2 days a problem arises when I try to load more than one photo on the screen. I have multiple photos of the same thing and I want to compare them. When I switch to one of the other photos, all of a sudden I lose the top bar that contains the 3 icons to close, minimize or expand. My only alternative is to shut the program down and restart it.
View 3 Replies
View Related
Sep 23, 2011
All my pictures are in folders by date, not by events...! How can I create virtual folders (like albums in PSP) to group photos from same occasion but from different folders?
View 4 Replies
View Related
Jun 15, 2012
Is it possible to do panoramas and stitching photos together with PSPPX3?
View 4 Replies
View Related
Apr 6, 2012
Well I have tried all the video tutorials and instructions found on the net but NOTHING works as yet.As far as the printed results from net searches go I get so far along and then the instructions cannot be followed because the item it says is on the menu is just not there on MY menu.
What I want to do is to take a portrait from one photo (Freehand Selection tool to select JUST the face?) and blend/merge it on the background photo. I want to be able to change the size and opacity of the face so that I get the EXACT result I want.
View 7 Replies
View Related
Feb 11, 2012
I cannot edit or adjust photos at this time. the program come up ok but when I click edit there is no picture there. It is the same on adjust. Not sure if I unclicked something or what.
View 5 Replies
View Related
Oct 18, 2013
How do I change a batch of pictures to 300 dpi? I am writng my first book and I need to change more than 100 pictures to 300 dpi.
View 7 Replies
View Related
Jun 13, 2011
I just downloaded PSP 13...I can't put a few photos on the work space....I only see one photo at a time and when I move a photo I see the checkered area and not the other photos...at the top left I see the photo names and i can click on them and the photo appears but only one at a time...around each photo I always had an area where I could see the X at the top right , click on it and the photo would leave...but now it's hard to see where the X is...
View 2 Replies
View Related
Apr 21, 2012
Can I do this so that I can store my RAW photos in an external drive?
View 2 Replies
View Related
Jun 28, 2011
Tried a search in the help file in Paint Shop Pro X3, but could not come up with anything. Is that an option/tool it has?
View 3 Replies
View Related
Aug 10, 2011
I have PaintShop Pro X3 and pretty much all the other programs. I scanned lots of photos (6*4) at a 300 dpi which works out at about 11 meg each photo (i think this was overkill!). However, when i created a slideshow these photos are shown as about one quarter sized. Is there any way i can correct this ? Should i for the future scan at a different dpi ? I want to view the images as a slideshow and am not interested in printing them.
View 8 Replies
View Related
Aug 8, 2011
I have used a program called mp3tag a little bit for music. Any tag editor like this for photos or video? I'm not very familiar with PSP X3, I know it can batch edit photos, but I was thinking that is different.
View 5 Replies
View Related
Feb 19, 2012
I have used PSP since version 7 but mostly for graphics. I have recently purchased a dslr camera and upgraded to PSP X4. I am slowly learning some of the photo editing features but would like imput on the best workflow for "fixing" digital photos. I am aware that all digital photos need some sharpening and some noise removal. My question is this -- should the sharpening and noise removal be after other adjustments (brightness, clarify etc.) or should those come first? I should mention that I have been shooting all pictures in RAW.
View 14 Replies
View Related
Jul 27, 2011
Just got Photo Pro x3 Ultimate and that works fine. The Photo Project Creator on the other hand seems to have a problem. I can run it and open a new project but I cannot browse to where my pictures are stored. Pictures are only available if I put them on my desktop. The browser shows me as a user and the hard drive but when I click on them nothing happens. I have tried deleting the files in the digital studio folder and completely reinstalling the program to no avail. It does not matter who I run the program as or if I run it in compatibility mode.
Windows 7 home premium 64 bit
Phenom II x4
1 tb hd
8 gb memory
View 2 Replies
View Related
Nov 7, 2013
I would like to get some variety of photos looking like they were taken during the civil war era. This would include white specks, black splotches, blurred edges, irregular black edges, etc. I have looked for ways in which to accomplish this and have not been successful at this.
Currently, I am using the following to varying degrees: Sepia Toning/Black and White, Blur, Salt and Pepper noise, and Vignette.
I have PSP 5
View 4 Replies
View Related
Aug 19, 2012
I have PSP X4 SP2.
Current color working space: AdobeRGB1998.icc.
I want to take HDR photo. I have 3 pictures JPG in AdobeRGB1998. When I giving HDR/MERGE EXPOSURE program automatically changing color profile of my pictures from AdobeRGB for sRGB. Why does it happen?
View 2 Replies
View Related
Jan 25, 2012
Just updated from X3 to X4. Spent an hour looking for the workspace color so I could get rid of the huge graphite box. Updated to SP1, found this forum, saw how to change the color in the files menu, and was very disappointed that the menu backgrounds changed, but not the BIG GRAPHITE BOX IN THE MIDDLE OF THE SCREEN!!
X3 gave us control of the colors. X4 is a big disappointment.what about the big graphite elephant in the room, the workspace?
View 2 Replies
View Related
Sep 15, 2011
When I try to print, the print placement dialogue box shows the image in greyscale, and when I click the options tab, the options to print color and CMYK separations are greyed out. Going ahead to print gives me a B&W print. The same file prints perfectly in color in PSP X3. What setting I need to tweak?
View 2 Replies
View Related
May 17, 2012
the image is attached.I would like to make the pin "blue", without loosing "real" appearance.
View 6 Replies
View Related
Dec 24, 2013
I understand many of the aspects of color management: gamut, color space, profiles, calibration, and most of the accompanying pieces. The problem is that I don't understand the inter-relationships of the various steps between taking a photo and printing it.
My equipment is not wonderful. If I were serious, I would have spent 10x what I did; but I'm not a pro. I'll settle for the best I can squeeze out of it. My goal, at this point, is to get my prints to look like what's on the screen.
For software I am using PSP X6 and Windows 8.1.
The photos I get come from various sources. As I understand it, those images (primarily JPEG if they come from a camera, presumably RAW if I scan directly into PSP) should have the profile of the capturing device embedded in them. Is that correct?
In the past I've been told that I should always use the color management in my editing application, rather than whatever Windows makes available. Is that still true? So far as I can tell, there is no way to turn off Windows Color Management (WCS).
You can turn off color management in PSP. There is a checkbox for it.I've been reading that I should set my PSP color working space to sRGB. Is that turned on and off by the color management checkbox? Assuming I have a profile for my capture device (camera or scanner), should I use that profile instead?
I have factory supplied profiles for both my monitor and my printer. Supposedly the printer will automatically select one of its various profiles based upon the paper I use, but that's a setting in WCS. (I can force a particular profile if I want.) In PSP's color management, I have to pick the profile manually.
Should I turn off color management in PSP, and set everything up in WCS? WCS has a setting for viewing conditions. The default is "WCS profile for sRGB viewing conditions", the alternative is "WCS profile for ICC viewing conditions". Does that mean that I could (or should) get an ICC profile based upon my work area's lighting, etc.
View 10 Replies
View Related
