I'm sure I'm trying to do something fairly basic here but the manual doesn't seem to work for me re canvas re-sizing (unless I'm missing something).
I want to take several images straight from the camera (say 3-4Mb each) and combine them to eventually make a single JPEG. Is this done by resizing canvas? Is it a case of taking one image and resizing the canvas or starting with a blank new canvas?
Imagine you have a picture with some parts (surfaces) in a XXX specific color. How to easily select only all these parts to modify their color?
View 2 Replies View RelatedI recently downloaded a Trial Version of PSP X5, and one of Adobe PSE11. For my purposes, I find PSP easier to use and therefore preferable. However, in PSE11, a scan of several photos contained in a single file can be "auto" split or divided into individual files, and as such can be edited individually. Try as I have, I have found nothing similar in PSP X5. This could be a deal breaker, as I have numerous old photos to scan and edit, and I find that doing 3 to 5 at a time is a big time saver. Does PSP 5 has this feature?
View 2 Replies View RelatedI have the paint shop pro x2 and I didn't realize before that when I converted my raw images over to jpeg it took the size down from 8MP to 1MP and my clients want wall photos. I need to know how to maintain the large file size.
View 5 Replies View RelatedI have a PC. When I try to import photos from my Olympus Ib program I transfer only the JPEGs to my pictures.
How do I transfer my RAW photos to PSP 4x?
I've tried to import then directly from the camera but it doesn't seem to work.
I just purchced x3 about two months ago and when it starts up there are a bunch of pictures from my computer at the bottom. And I have to click on one of the pictures and then close the picture. I'd rather not have my photos automatically displayed at the bottom of the page at start up. Is there a way to open x3 without the pictures being displayed at the bottom of the screen.
View 2 Replies View Relatedi can`t share photos on facebook.it was working ,now it is not working.
View 1 Replies View RelatedI am having a rather strange problem with PSP X14. I will describe my general workflow and where the problem occurs.
I do some editing to my photo and save it as a full size image. Next I resize it to a much smaller version for use online. I have no problems at all with these two steps. Next, I cancel the resized dimensions and resize it again to a file closer to the original size, after I sometimes sharpen it and add a canvas. Many of the thumbnails for this last step have horizontal color bars across the bottom of the thumbnail, ranging roughly from 1/16 to 1/3 of the image size. When I hit on it and open the file, the bar is not there. I tried opening this thumbnail in another photo editing program and when I have access to the thumbnails for opening, that bar is there on select images, and when I open the file, it's gone. Unfortunately I haven't had the opportunity to try printing it yet.
I've been following this basic formula for preparing and editing photos for a very long time and haven't had this problem until recently. And it's random, as not all images have this problem. I tried changing this process and reopening the full size file that has been edited and resize that one, but am getting the same random results. I have no problems with the thumbnails for the full size and the first reduced size images.
I have been a long time user of PSP...since v.7 and upgrade versions regularly. I'm running Windows 7 premium, 64-bit on a laptop with an Intel i-7 processor.
In X2 all I had to do was go to file- either 'twain acquire' or -'from scanner' and my scanner software would open in X2 and i could directly import the scan.
In X3 all the acquire choices are grayed out unless I first choose, file- new, and then a dialogue box for size options opens.Once I have a new (empty) file on the editor screen I can then acquire . Is this a new change in X3 ?
I'm using Paint Shop Pro X2. Within the past 2 days a problem arises when I try to load more than one photo on the screen. I have multiple photos of the same thing and I want to compare them. When I switch to one of the other photos, all of a sudden I lose the top bar that contains the 3 icons to close, minimize or expand. My only alternative is to shut the program down and restart it.
View 3 Replies View RelatedAll my pictures are in folders by date, not by events...! How can I create virtual folders (like albums in PSP) to group photos from same occasion but from different folders?
View 4 Replies View RelatedIs it possible to do panoramas and stitching photos together with PSPPX3?
View 4 Replies View RelatedWell I have tried all the video tutorials and instructions found on the net but NOTHING works as yet.As far as the printed results from net searches go I get so far along and then the instructions cannot be followed because the item it says is on the menu is just not there on MY menu.
What I want to do is to take a portrait from one photo (Freehand Selection tool to select JUST the face?) and blend/merge it on the background photo. I want to be able to change the size and opacity of the face so that I get the EXACT result I want.
I cannot edit or adjust photos at this time. the program come up ok but when I click edit there is no picture there. It is the same on adjust. Not sure if I unclicked something or what.
View 5 Replies View RelatedHow do I change a batch of pictures to 300 dpi? I am writng my first book and I need to change more than 100 pictures to 300 dpi.
View 7 Replies View RelatedI just downloaded PSP 13...I can't put a few photos on the work space....I only see one photo at a time and when I move a photo I see the checkered area and not the other photos...at the top left I see the photo names and i can click on them and the photo appears but only one at a time...around each photo I always had an area where I could see the X at the top right , click on it and the photo would leave...but now it's hard to see where the X is...
View 2 Replies View RelatedCan I do this so that I can store my RAW photos in an external drive?
View 2 Replies View RelatedTried a search in the help file in Paint Shop Pro X3, but could not come up with anything. Is that an option/tool it has?
View 3 Replies View RelatedI have PaintShop Pro X3 and pretty much all the other programs. I scanned lots of photos (6*4) at a 300 dpi which works out at about 11 meg each photo (i think this was overkill!). However, when i created a slideshow these photos are shown as about one quarter sized. Is there any way i can correct this ? Should i for the future scan at a different dpi ? I want to view the images as a slideshow and am not interested in printing them.
View 8 Replies View RelatedI have used a program called mp3tag a little bit for music. Any tag editor like this for photos or video? I'm not very familiar with PSP X3, I know it can batch edit photos, but I was thinking that is different.
View 5 Replies View RelatedI have used PSP since version 7 but mostly for graphics. I have recently purchased a dslr camera and upgraded to PSP X4. I am slowly learning some of the photo editing features but would like imput on the best workflow for "fixing" digital photos. I am aware that all digital photos need some sharpening and some noise removal. My question is this -- should the sharpening and noise removal be after other adjustments (brightness, clarify etc.) or should those come first? I should mention that I have been shooting all pictures in RAW.
View 14 Replies View RelatedJust got Photo Pro x3 Ultimate and that works fine. The Photo Project Creator on the other hand seems to have a problem. I can run it and open a new project but I cannot browse to where my pictures are stored. Pictures are only available if I put them on my desktop. The browser shows me as a user and the hard drive but when I click on them nothing happens. I have tried deleting the files in the digital studio folder and completely reinstalling the program to no avail. It does not matter who I run the program as or if I run it in compatibility mode.
Windows 7 home premium 64 bit
Phenom II x4
1 tb hd
8 gb memory
I have hundreds of paper based photos, damaged in color disperse caused by a flood in our basement. I cleaned and dried them all, and I made a digital copy with my mobile phone camera. I'm using PSP X5 to resize the photos and I used "intelligent correction" from PSP. Result of copy is now better than the original, but the color disperse is still there, if there is a way to reduce this damage with PSP
View 6 Replies View RelatedI have a rectangular screen grab (Windows application) that I would like to simply round the corners and add a border. The image is not a photograph, but since I have Paint Shop Pro X3 and like how it works, I thought I would try it . I have spent some time trying to do this with Paint Shop Pro X3 with no luck. None of the pre-defined frames seemed to do what I need. I would also like to create a drop-shadow behind the image. how to do this or a video that I can watch. A list of steps would also be OK.
View 1 Replies View RelatedHow can I create a 2D gray scale image from a color image?
View 1 Replies View RelatedI would like to get some variety of photos looking like they were taken during the civil war era. This would include white specks, black splotches, blurred edges, irregular black edges, etc. I have looked for ways in which to accomplish this and have not been successful at this.
Currently, I am using the following to varying degrees: Sepia Toning/Black and White, Blur, Salt and Pepper noise, and Vignette.
I have PSP 5
I have an image of a map and want to create a number of individual images of that map each with a large white dot with a black edge (to highlight different cities).
I have created a separate image of the dot using both transparent background and normal background and then attempted to use EDIT>COPY the image of the dot and then EDIT>PASTE to the image of the map but no matter which PASTE option I use I cannot achieve what I want to.
Also (different problem) I lost my MATERIAL PALETTE. I noted that to restore it I could use VIEW>PALETTES and select MATERIALS but it was already selected. I also used the F6 key without success. I had to start PSP by pressing the SHIFT key when I started it to restore PSP to its defaults and then I could select and display it. So what stopped me from displaying it in the first place?
A client sent me four images taken with his Canon camera - they are in Canon Raw (.CR2) file format. I can't get them to open and then save them as a .jpg or a .pspimage format in either PSP9 or in X3. In X3, when I click on the pic, it brings up the "Canon RAW Lab" dialogue box, showing a black and white image but with a deep pinkish cast to it. And there is no options to save it. What do I do from here?
View 7 Replies View RelatedI am using PaintShop Pro X5 & PaintShop Photo Pro X3
I have an image which was originally made up of two other images side by side. They are both of similar colours and content but the dividing line between them is quite obvious. I don't have the original PSP files in order to use the selection and layer method of feathering them, so what would be the best way to get the pixels to blend across the join? I thought there was a tool in PSP to do this but can't find anything.
I have learned how to remove a background and how to save the resulting image as a PNG.
View 3 Replies View RelatedI have 2 gif images. On image2 I have erased the background so as all you see is the checkerboerd.I want to place image2 (the visible part) on to image1.
I'm sure I have done all the correct procedures but the #2 image will show either a black or white background when pasted on to image 1.
These are the rules I followed. To make one image color transparent
1. Choose Image Palette Set Palette Transparency. If you are prompted to reduce the color depth and number of layers, click Yes to continue and then choose the options for decreasing color depth.
2. On the Set Palette Transparency dialog box, choose one of the following options:
• Set the transparency value to the current background color — makes the background color transparent
• Set the transparency value to a palette entry — specifies a color to be transparent. Click the color in the image, or click the color box to select from the current color picker. If you want to view the transparency, click Proof.
3. Click OK. The color is now transparent; however, it may still be displayed until you hide it.