I'm trying to reverse the path for some text I'm placing around the bottom of a circle. I've successfully placed the text around the top of the circle, but the option for reversing the path is grayed-out .
View 11 RepliesIn PSPX4 how do I make my text curve in a circle or the like?
View 3 Replies View RelatedI want to write text then make it curve up/down etc.. without using a object. But by using my mouse.
Is this possible?
I remember I was able to do this in PSP 9 but that was a long time ago. I would be able to do it with my mouse. I get the box now after I apply text to Move, Rotate, resize, but no curve. I remember in the past dragging my mouse pointer to the center of the box and getting a option where I can move the text to curve it up or down. That is what I would like to do again.
I have PSP X4
On an image of the sea and sky- I want to Place a wavy line where the sea meets the sky Have the sea beneath the line and the sky above it Place text on the wavy line to follow its path
View 1 Replies View RelatedI am able to put text in a vector however, I'm having problems having text and then adding reverse path text.
What I would like to do is add additional text at the bottom of the circle but concave instead of convex. I hope that makes sense. I want to have the text at the bottom wrap around the circle but like a smile so the text isn't upside down.
Is there any way to make vector text bear the characteristic of "closed path data"? Perhaps prior to, or after, applying the text in PSP? I am trying to import files from Corel PaintShop Photo Pro into MotionStudio 3D.
I am able to bring in vector objects created, but is there a way to make it so that vector text works also, by making vector text "closed"?
I have been working on a project in which I need to curve text. I know how to curve the text via creating a path, path to text, etc. This issue that I am having is that the bottom of the text is distorted. By distorted, I mean the bottom of the text becomes thin and it looks bad.
Here is an example of the issue that I am dealing with (if it shows up).
Where can I find a preset shape of a ogee curve. It's sort of a slanted S. I've attached an image of one. Lacking a shape, how to draw one using PSP X5. I used autocad and converted the DWG to a JPG file.
View 5 Replies View RelatedI have some difficulty in reversing the text on a leader to the opposite side. As per the picture below, it is on the right side, but I would like to move it to the left. When I drag it, the whole leader goes with it. The text in reference here is the one with ".06 x 45.
View 4 Replies View RelatedI cannot figure out how to distort text into a curve to achieve a similar result to this Lucasfilm logo:
Hopefully I haven't overlooked a tutorial here somewhere - I've searched but not found anything. I'm guessing this'll have a really basic solution that I've missed completely...
I need to create text along a curve. Is there a plugin for that? I will have a graphic in a circular shape and need text at the top and bottom to be curved to follow the circular graphic.
View 2 Replies View RelatedHow do I make a custom brush shape follow the contour of a path made with the Pen tool?
View 2 Replies View RelatedI am a licensed user of PaintShop Pro X3 with all current updates installed. Yesterday I purchased the ultimate bonus pack online ( Winzip,Painter Essentials, User Guide,KTP and Photolooks) from Corel.The photo looks plugin installed with no problem. The Corel KPT Collection (PSPPX3_KPT_01 set up file) would not install giving me the following error message"The path to the language folder could not be resolved, setup cannot continue".I use Win 7 64 bit
View 6 Replies View RelatedI'm making a commercialized game for a company and i use Paint net, i have down loaded some of the older plugins for use but what i;m looking for is to curve or circle the written text that i have done on a game box.
I have now found a plugin that works really good
I need to create text along a curve. Is there a plugin for that? I will have a graphic in a circular shape and need text at the top and bottom to be curved to follow the circular graphic.
View 3 Replies View RelatedI am trying to get the text to curve around the blue banner its on.
View 5 Replies View RelatedI do a lot of CD designs, and often I have my text centered on the front covers. When I put the text centered, however, PSP is added an extra space to the end of text, so when I center it on the canvas the text is actually off-center to the left. When I go into edit the text, there is no space on the right of the words to delete.
With the text selected this is how it looks: The right edge of the frame should be flush with the right edge of the last 'T'.
Way back when I originally bought PSP X3, I used it for a short while then went back to X2. Mostly because the X3 text tool would not remember text I had used. Now I've recovered from a hard-drive death and want to move forward and use my X3.
How can I make the X3 text tool remember text?
I have a .jpg file with an image, which I copied from the Clipboard. I now want to add text NEXT to the image. That is I now want to type text and position the text after is typed.
When I use the Text Tool, the text cannot be moved.
I would like to create a number wheel with the numbers at 90deg to the circle but I cannot find any way to achieve this and it seems like something that should be doable within the text to curves feature.
Here is an example of what i would like to achieve.
Is there a plugin for creating text that follows a path created by the user? I understand how to arch text. That isn't working for my project. I need to plot a path and let the text follow it.
View 8 Replies View RelatedI am trying to find a way to watermark my photos using text for uploading to the net to try and prevent image theft. Canon Zoom Browser adds text but only 1 pic at a time.
I have searched this forum without success and searched the internet without success except for Alamoon which does one pic at a time ok but to do in batches requires you upgrade at a cost of about half the price of upgrading to PSP x5.
I read a comment by a subscriber here dated 2010 referring to PSP x3 but it said that after going to Image->Watermarking->Visible Watermark, you have to load a "pre-made image ..." Where do you get this pre-made image from ? Remember, I only want to add a couple of words of text. Surely this is not beyond the capabilities of Corel? Alamoon does it very easily. It doesn't take numerous windows and dozens of clicks with multiple layers to negotiate etc.
Trying to follow tutorials to create text. They all say to choose type (vector, floating, or selection) from the box on the text toolbar. I have been over it with a microscope and can't find it. I have expanded all arrow flyouts - nothing.
View 2 Replies View RelatedI just got psp x3 and i can't get my text to work all it dose is put the 1st letter in and the rest is blank or it put the 1st letter and the 2nd is blank then the 3rd one come up and the 1st letter is gone. I up new up dates in and it doing the same thing
View 3 Replies View Relatedhave used Paint Shop Pro X3 for as long as it has been around and could always change text(select the text tool)from Vector to floating before actually typing the text. Now after not making any changes to psp pro x3 I it sticks on vector all the time. PSP PRO X4 Does the exact same as well. It defaults to vector and will not let me change to floating.
View 2 Replies View RelatedWhen I was using PSP X I was able to add text to a template document simply by pressing the 'A' text tool, positioning the cursor, left clicking to open the text entry box and then typing (usually just the date), this I can't do in PSP X3 as the ' highlighted input box' hovers over a saved documents' previous input - (usually a month) and won't open or move without dragging the month with it. The cursor offers spurious flashes before leaving me with a flashing horizontal bar unable to proceed. The problem still occurs regardless of which previously saved and archived document I try to make adjustments to.
I had this problem too 12 months ago with a trial version which I had expected was a download fault but I think not. The routine still works fine on PSP X
I'm having a problem in one project. When I enter the text mode there is a cross-hair with a t on an arc. When I type text it's upside down. I've tried adjusting the direction, changing fonts still doesn't work. It doesn't happen on any other projects.
View 2 Replies View RelatedI am running Windows7 64 bit and although I am fairly OK with most things in X3, there is one very simple thing that is baffling me! How do I edit existing text?
For example:
I create a plain white background.
Click on the "Text" button and add some text.
Click the green "Apply changes" and then do something else e.g add some graphics etc.
How can I then edit the text that was created (Correct a spelling mistake, change font size colour etc).
(PaintShop Pro v8.10)
I have a single vector text instance in my (PSP file) image. It says "cat". I want to make multiple copies of the image but with the word "cat" localized into different languages. Rather than editing the vector text via the "Text Entry" dialog box I was hoping to be able to do this with a script. The the idea is that I would have a copy of the script for each language, change the relevant text as required and run the script. E.g. For French, I would edit the script changing "cat" to "chat" and then run the script against the French image.
So first I wanted to identify the part of the script that I would need to edit. To do this I created a script as follows: I started the script recorder, change the text "cat" to "dog" in the Text Entry dialog box, saved the script, opened it in a text editor and searched for the text "dog". However, the word "dog" does not appear anywhere in the script. I don't understand this. Where is the vector text "dog" being stored? If I run the script against a different image that also has a single instance of vector text, it changes the text to "dog", so the script is working correctly.
I've been marking-up images with vector text (on vector layer) and have some issues. After clicking to position the text box, typing in text and then clicking the CHECK tool button to 'set', how does one go about deselecting that text object? It's not working smoothly here!!
View 1 Replies View RelatedThis part is logical. Add text to a vector layer and write a script to show the text and the position. From what I can tell, the Characters key is the text and the Start key is the (X,Y) position.
So far no problem, click the text 1 pixel right and the Start[0] increases by 1. Same with 1 pixel down and Start[1] increases by 1.
Now for the crunch... Rotate the text and Start does not change (no matter how much you move the text).
By trail and error, I find that the Matrix key changes.
Now, Matrix has 9 values and from what I can tell Matrix[0], Matrix[1], Matrix[3] and Matrix[4] somehow relate to angle. Probably sin and cos of the angle from the x- and y- axis respectively.
Matrix [2] and Matrix[5] do increase linearly with shifts in x and y. How does this relate to the actual position of the text
You can see a more detailed description of the problem and my sample script here. [URL]