In pre X4 releases, I could glance in the lower right of the program, hover my mouse over an image and it will tell me it's properites (color depth, size, etc...).
How can I turn this feature back on in X4?
I have PSPro X.Often when I capture an image, figures show which I presume is the image size measurements.What can I do to avoid these figures being seen in the screen capture target area.
View 2 Replies View RelatedDo masks automatically stretch to the size of the target image?
In PSP8 I opened my target, 1615 x 1066 px:
Then, following the instructions, I opened this circular mask, 450 x 450 px:
But after completing the procedure my result looks like this, with an elliptical 'see through' area instead of a circle:
If this is by design, how would I get the circular effect I want? There are simpler ways of doing it for an all black/white mask.
I created a image (with blank background) with dimensions 640 x 480 (its my default working image).
I have copied photograph with dimensions 7300 x 4200 and pasted as new layer on the image (640 x 480). Obviously, the pasted photograph is bigger and it couldn't be showed totally. I am adjusting the size of the photograph manually, dragging and dropping its corner lots of time.
I tried to use "image => resize" / "image => canvas size". But it just act on my default image (640 x 480), not the photograph (even when its layer is selected).
So, is there any way of resize the photograph automatically to fit in the default image (640 x 480)?
As part of my new year plans I'm busy sorting through shots I took last year on my Canon EOS 550D.
I took many shots in both JPEG and RAW format (same shot in each).
The JPEG images display and can be edited perfectly well in X3 but not the RAW files.
In the Organiser all shots (JPEG and RAW) look fine along the bottom strip.
But when I select a RAW file it displays momentarily in the main view as a slightly fuzzy image and then jumps to an elongated, vivid red & black image. Looking more closely X3 is cropping and NOT displaying three quarters of the right hand side of the shot. I just get a thin strip from the left hand side of the original shot.
A double click in Organiser takes me to the Camera RAW Lab where I get the same thin strip, red & black image.
I cannot seem to get the Help menu item to work at all. Every time I select Help -> Help Topics... I get a dialog box with the following error message: Web Works Help display fail! I've reinstalled PSP twice. And I downloaded the latest update.
View 13 Replies View RelatedHave been running the trial version of Lightroom 3.6 for the past three weeks. I see that it cannot handle or display PNG format, of which I have over 11,000 images. PNG is my primary WORKING format for single layer images due to its lossless compression, support for EXIF data, and transparency later. Lightroom creates tens of thousands of tiny folders and catalog files that are difficult to defragment and greatly complicate my routine backups. I must comment that Adobe filters, especially Noise Reduction are really great but the lack of PNG support is a show stopper.
Also ran Lightroom Synchronize to add recent photos to the Canon folder and for some reason it changed the date stamp on over 3 GB of photos to the present day. When I went about a routine backup of the photos, the backup software wanted to completely overwright all the files with TODAYS date on the MyBook drive!! What? no way. So now I must RESTORE all these files BACK to the original date stamps. This is way over the top. Plus Lightroom is very slow to complete the Sync task, and might even take two passes.
what is the purpose of the histogram display on the adjust pane. can it be modified from there? Also - what is the purpose of the four boxes below the histogram display?
Together they take up too much real estate to be there just for looks .
I use PSP X3 for web image editing and am sometimes sent jpeg files which are in CMYK format. Unfortunately PSP does not display the colours in these files correctly. Yellow will display as brown, pale blue as turquoise and pink as purple for example.
If I open the same file in almost any other programme, including the humble "Paint", the colours display fine and my workaround up until now has been to open in another programme, copy the picture to the clip board and then paste it into PSP as a new image. The colours are then fine but it greatly increases my work time, especially when I have many images to process.
Surely there must be a way to get these images to display correctly. It has nothing to do with monitor or gamma adjustment otherwise they would display incorrectly in all other programmes also.
Maybe it is a bug or just something that Corel have overlooked. RGB jpegs display fine, the problem only occurs with CMYK images.
Is there a way to have the thumbnail display on the bottom of the Organizer screen use a vertical scroll bar on the far right instead of the horizontal scroll bar below? Or, can I enlarge the size of the thumbnail display area without enlarging the size of the thumbnails? (Which means, I suppose, being able to specify what size I want the thumbnails displayed.)
View 1 Replies View RelatedI wish to report a bug that has been present in x4 and x5 regardless of SP or updates installed. Due to this bug I use X3 as it was the last version that worked for me.
The bug is that several menu buttons on the Edit screen will not display correctly, it is as if the icon is corrupted. This happens with the free trial version as well as with a registered version with updates installed.
See the attached screen shot as it explains this much better.
Computer Specs:
Win XP Pro w/SP3 32bit
ATI video 512M w/latest drivers
2G Ram
240G HDD
Intel 3.01Ghz CPU
X4 & X5 Button Display Bug
Image menu>canvas size: I can no longer type new dimensions in the number boxes. I have to use the sliders or the arrow keys.
View 2 Replies View RelatedI've been using PSP for a long time now (fisrtly PSP7 and now PSP9) and I wanted to buy the new version PSPX4. I downloaded the free-trial version and I saw that it is impossible to generate files bigger than 10'000x10'000 pixels. In the canvas size menu, it's impossible to give a higher number. The problem is that a made bigger files with PSP9 and I'd like to keep on working on it without resizing them.
So my question is : Is it only a limitation of the trial version or is it simply impossible to work with bigger images than 10k x 10k ? I hope there is a simple solution because PSP9 encounters some problems with Win7...
If i'm making a A5 flyer on PSPX2, what size should I make it?
Would it work if when creating the new image, it's the length x width of an actual A5 flyer?
I have used PSP since version 2, so have been at it for awhile. Just upgraded to 6, as I was using version 4.
The problem I have is when I am in the edit area, and have a photo on the screen I use my mouse wheel to enlarge or shrink depending on my needs. The old version the windows box around image would also resize with image. I have attached a few images. I normal could fix this in the settings, but for some reason the window will not follow the image size as I enlarge or shrink? It does when I actually resize image, but I need this to do that when I am just using mouse wheel to make bigger or smaller on my screen.
I can not use my HP scanner. It looks like the image size is wrong and should be reduced to less than 49999 pixels high x 4999 pixels wide. Where could I change the image size in X4. Using Windows 7 Pro.
View 2 Replies View RelatedI'm new to this, but have noticed that whenever I choose the "save as" command for an open photo file, the saved file is much smaller. Even when, for example, I name a picture and make no other changes, the file size goes from say 2.4MB to 640 or so. And these are jpeg to jpeg saves. I have to think this diminishes resolution and options for future edits. Is there a way change some save settings or something?
View 2 Replies View RelatedThere is a hack of the registry at URL....Does it still apply to PSE 11?Might it also apply to PSE 12? What is the effective limit on the size of an image? I have, for example, a panorama of more than 300 MB.
Win 7 Pro 32 (4 GB RAM) and a second machine WIN 7 Pro 64 (8 GB RAM)
When I save a picture it goes from 6mb to 700kb. Is this normal or do I need to do something different and does it effect the picture quality when printing?
View 3 Replies View RelatedTips on reducing my JPG images in PSP X4 without loosing too much quality. I know that it isn't possible to not lose some picture quality but if you have any pointers that would be fantastic.
View 2 Replies View RelatedI have PaintShop Pro X3 and pretty much all the other programs. I scanned lots of photos (6*4) at a 300 dpi which works out at about 11 meg each photo (i think this was overkill!). However, when i created a slideshow these photos are shown as about one quarter sized. Is there any way i can correct this ? Should i for the future scan at a different dpi ? I want to view the images as a slideshow and am not interested in printing them.
View 8 Replies View RelatedPSPRo X.I have lost the ability to increase the size of the clone brush either by the presets or by the mouse and keyboard.It will not show by more than about one eighth of an inch square .
View 2 Replies View RelatedMy Canon 7D typically produces a JPG file in the 5B to 12MB range if set to the largest JPG quality. My problem is that if I open for example a 7MB file in Photo Pro X3 and save it again (even if I make no changes) the resulting file is about 2MB. Obviously some compression is happening which I want to avoid/control. Is it possible to set the default compression that X3 uses?
If I use file - export - JPG optimizer I can control things but if I for example want to do a batch process on lots of files. I have used Paint shop Pro since version 5 and love it but I might have to change to another editor if I cannot solve this one.
When I try to import from a twain bron. Canoscan lide 210 says the picture is 10x15 cm = about 4x6 inch. Looks alright. But after import the size of the picture in PSP x4 and X5 is 4x6 centimeters. So somewhere it's going wrong.
View 2 Replies View RelatedIn previous versions through customize options there was the option to tick for large icons. It has been left out of X4 or is it there and I can't find it. That option was very good for big screens. Do they intend to bring it back in the update along with the colored icons.
View 9 Replies View Relatedcan a watermark stay the same size even when an image size is altered? say if its text and it gets too big when i enlarge the image how do i shrink the watermark ? when it is already merged and flattened as one picture without a separate layer.
such as a php or java script to keep the watermark distinct in a way even in a flattened pic or to select the watermark to erase it and re-apply it in the right font size back onto the resized pic?
In PSP 8, if I have many text entries within a single vector layer, all with same font size and type, is there a way to change the font size for all of them at once?
View 2 Replies View RelatedWhen photographing a tall object from the ground, for example the rectangle of a house wall, the picture perspective will be distorted in the sense that the bottom of the wall will be wider in the picture than the top of the wall.
Say, for example, that the bottom of the house wall in the picture is 1 inch wider than the top of the wall. Is it possible to increase the size of the picture gradually from the bottom to the top, from 0% of 1 inch at the bottom to 100% of 1inch at the top? So the end result in the picture will be an evenly sized wall from bottom to top?
I'm trying out X4, and I don't know if I'm doing something wrong, but it seems like the canvas size on X4 at any resolution is much smaller than in X3, e.g., at 200 pixels/inch, X4 allows 50"x50", while X3 allows 164x164". Similarly at 150 pixels/inch, X3 allows 218", while X4 allows approximately 67". Given the fact that X4 is supposed to provide access to more memory, and uses a scratch pad, this does not make sense to me-
View 4 Replies View RelatedI have a rectangular screen grab (Windows application) that I would like to simply round the corners and add a border. The image is not a photograph, but since I have Paint Shop Pro X3 and like how it works, I thought I would try it . I have spent some time trying to do this with Paint Shop Pro X3 with no luck. None of the pre-defined frames seemed to do what I need. I would also like to create a drop-shadow behind the image. how to do this or a video that I can watch. A list of steps would also be OK.
View 1 Replies View RelatedHow can I create a 2D gray scale image from a color image?
View 1 Replies View Related