Paint Shop Pro :: RAW Files Display As Red And Cropped
Jan 2, 2012
As part of my new year plans I'm busy sorting through shots I took last year on my Canon EOS 550D.
I took many shots in both JPEG and RAW format (same shot in each).
The JPEG images display and can be edited perfectly well in X3 but not the RAW files.
In the Organiser all shots (JPEG and RAW) look fine along the bottom strip.
But when I select a RAW file it displays momentarily in the main view as a slightly fuzzy image and then jumps to an elongated, vivid red & black image. Looking more closely X3 is cropping and NOT displaying three quarters of the right hand side of the shot. I just get a thin strip from the left hand side of the original shot.
A double click in Organiser takes me to the Camera RAW Lab where I get the same thin strip, red & black image.
View 5 Replies
ADVERTISEMENT
Apr 28, 2012
Opened a jpg file ... cropped then saved as bmp to use as texture in another program.
In explorer folders view it shows but has a locked symbol in front of it.
Try to find it from another program and it does not show in folders.
View 1 Replies
View Related
Jul 20, 2010
I cannot seem to get the Help menu item to work at all. Every time I select Help -> Help Topics... I get a dialog box with the following error message: Web Works Help display fail! I've reinstalled PSP twice. And I downloaded the latest update.
View 13 Replies
View Related
May 25, 2012
Have been running the trial version of Lightroom 3.6 for the past three weeks. I see that it cannot handle or display PNG format, of which I have over 11,000 images. PNG is my primary WORKING format for single layer images due to its lossless compression, support for EXIF data, and transparency later. Lightroom creates tens of thousands of tiny folders and catalog files that are difficult to defragment and greatly complicate my routine backups. I must comment that Adobe filters, especially Noise Reduction are really great but the lack of PNG support is a show stopper.
Also ran Lightroom Synchronize to add recent photos to the Canon folder and for some reason it changed the date stamp on over 3 GB of photos to the present day. When I went about a routine backup of the photos, the backup software wanted to completely overwright all the files with TODAYS date on the MyBook drive!! What? no way. So now I must RESTORE all these files BACK to the original date stamps. This is way over the top. Plus Lightroom is very slow to complete the Sync task, and might even take two passes.
View 1 Replies
View Related
May 10, 2012
In pre X4 releases, I could glance in the lower right of the program, hover my mouse over an image and it will tell me it's properites (color depth, size, etc...).
How can I turn this feature back on in X4?
View 6 Replies
View Related
May 24, 2012
what is the purpose of the histogram display on the adjust pane. can it be modified from there? Also - what is the purpose of the four boxes below the histogram display?
Together they take up too much real estate to be there just for looks .
View 4 Replies
View Related
Jul 20, 2011
I use PSP X3 for web image editing and am sometimes sent jpeg files which are in CMYK format. Unfortunately PSP does not display the colours in these files correctly. Yellow will display as brown, pale blue as turquoise and pink as purple for example.
If I open the same file in almost any other programme, including the humble "Paint", the colours display fine and my workaround up until now has been to open in another programme, copy the picture to the clip board and then paste it into PSP as a new image. The colours are then fine but it greatly increases my work time, especially when I have many images to process.
Surely there must be a way to get these images to display correctly. It has nothing to do with monitor or gamma adjustment otherwise they would display incorrectly in all other programmes also.
Maybe it is a bug or just something that Corel have overlooked. RGB jpegs display fine, the problem only occurs with CMYK images.
View 14 Replies
View Related
May 27, 2011
Is there a way to have the thumbnail display on the bottom of the Organizer screen use a vertical scroll bar on the far right instead of the horizontal scroll bar below? Or, can I enlarge the size of the thumbnail display area without enlarging the size of the thumbnails? (Which means, I suppose, being able to specify what size I want the thumbnails displayed.)
View 1 Replies
View Related
Feb 26, 2013
I wish to report a bug that has been present in x4 and x5 regardless of SP or updates installed. Due to this bug I use X3 as it was the last version that worked for me.
The bug is that several menu buttons on the Edit screen will not display correctly, it is as if the icon is corrupted. This happens with the free trial version as well as with a registered version with updates installed.
See the attached screen shot as it explains this much better.
Computer Specs:
Win XP Pro w/SP3 32bit
ATI video 512M w/latest drivers
2G Ram
240G HDD
Intel 3.01Ghz CPU
X4 & X5 Button Display Bug
View 13 Replies
View Related
Jul 5, 2011
I understand you cant tag Raw Files . But tags have been put on some raw files on one particular date, the tags are incorrect tags but when i try and remve tags it says the software doesnt support it.
View 1 Replies
View Related
Feb 16, 2013
When I installed PaintShop Pro X5, I listed the associated files (all of them). Now, when I go to the associated files, I cannot change the list (one or the total list). I check the boxes, but nothing changes. so I can change these associated files.
View 3 Replies
View Related
Nov 15, 2011
In a seemingly random way, files occasionally just show up corrupted (thumbnail is white with an X in the center) and no longer open. Image info still shows up but the image is corrupted or lost. I do not have the Preserve feature (or whatever it's called) active, as it didn't seem to have an option to select where the preserved files are stored, and I don't want hundreds of MBs of image files to be stored by default on my small SSD C: drive, where my operating system is installed. There seems to be no rhyme or reason as to why these files disappear. I can not professionally trust a program that exhibits this behavior. Must I now store duplicate file sets, to be drawn from should X4 decide to corrupt my working files at random?
View 7 Replies
View Related
May 24, 2013
I have paint Shop Pro X but for the files I am working on I have to use PSP 9 on XP (SP1). Trust me, after weeks writing back and forth to Corel and them testing our files it is the only way to open them. Our images are converted to .fpx using TrueSpectra which is now a relic from the past. PSP never had a problem with the .fpx files until XP service pack 2 was released and it then stopped opening them.
We have over 200,000 web images that are currently saved as fpx files (archaic I know and many of you won't have even heard of them let alone used them) that we are converting to a more adaptable and flexible pTIFF format (Pyramid TIFF). The pTIFF will allow us to include a path that can be used by Scene7 for various web functionality (movable transparent images).
, the real problem... What I am finding is that when I open some of the fpx files in Paint Shop Pro the products that are normally shown on white backgrounds are showing on black. It turns out that someone has managed to include transparency in the fpx file. I am unable to find a path, a channel mask or layers in the fpx file when opened in Paint Shop Pro. So how is what I always thought to be a flat image creating the selection that is filling with black?. Obviously, when the conversion to TIFF takes place it's rendering the image on a black background which is a problem.
I have tried un-checking "Render Transparency" under File format preferences (PostScript tab) but it made no difference.
If nothing else, is there was a way to make the black background fill in white instead. That would be fine.
View 9 Replies
View Related
May 4, 2011
I cannot edit .EMF files generated from PowerPoint 2007. I always obtain a blank image after introducing any resolution values at the input field. The same occurs with .WMF format. I need to import vectorial graphics from .PPT files with a specific resolution, and I do not see any other way to do that.
I have PaintShop Photo Pro X3 v.13.2.1.20 with last available patches and updates installed.
View 5 Replies
View Related
Jul 29, 2012
I downloaded PSPX4 from the Corel site where I bought it. It is in my Downloads folder instead of Program Files. Then I copied it to program files and it still isn't even in a folder called Corel. How do I get it where it should be? And, I cannot find all the folders then go with it, like tubes, brushes folders etc.
View 2 Replies
View Related
Mar 31, 2012
After I installed Paint Shop Pro X4, I noticed that some of my picture files had changed and now I can't open them. They are labeled as .alb files. What must I do to open or convert them. Many were made a decade ago. I hate to loose them.
View 1 Replies
View Related
Oct 1, 2011
I've been given a .cdr file to use. I can't open it in X4, but X3 opens it. Not sure if it's opening it correctly, but it's opening it. X4 just comes up with an "unsupported file type" error. Did Corel drop support for .cdr files in X4?
View 9 Replies
View Related
May 19, 2013
My AVI files will play and allow me to capture a frame but MP4 (my new cam) will not open in X5. I did get a warning that I needed to install Quicktime, which I have done and still won't work.......
The MP4 only shows the 1st frame of the video.I thought maybe PSP doesn't support MP4, but then I read this in help file:"Corel PaintShop Pro supports the video formats that are supported by your system."
View 3 Replies
View Related
Oct 9, 2011
I keep getting error that its not a proper psp file .... why is that? ... Is this normal?
I wish to take my work back to x3 version cause x4 is so buggered with png issues that its now impossible for me to work with it.
View 2 Replies
View Related
Sep 18, 2013
Paint shop pro 4. Patches up to date. I am unable to save files my files as .jpgs. I can save them as .psp files however. I was able to save them last week, so something has changed in my settings, but where to look. 10 years using PSP and I have to say...dislike all versions after PSP XI.
View 2 Replies
View Related
May 11, 2013
I am having an issue as follows.
a) I have postscript (.ps) files for my company's logo which are in process color (CMYK).
b) These files open fine in PSP, and the colors are displayed properly. However, I understand that the files were actually converted to sRGB space, that is, I can't actually make changes in CMYK space, only in sRGB.
c) I need to make some changes to the logo, so I figured I would make the changes, then save a TIF file, using the CMYK space. My printer requires a CMYK file only.
d) Therefore, I simply saved the file opened in b) as a TIF file with a CMYK color space.
d) When I do the Save As in PSP, the file looks exactly like it did when first opened in PSP. (Update - if I close the TIF file in PSP, then reopen it, it does look different - greenish tinge, but not as bad as other viewers) But when I look at the file in other programs (IrfanView, MS Publisher, etc) the image is overly green, for example, my olive green logo components are almost bright green, and almost everything else seems to have a slightly greenish tint.
e) By comparison, if I open the postscript file in Irfanview, it renders correctly.
I thought Irfanview would input CMYK files (and apparently it does for .ps files) but my colors are wrong. Is this a TIF output issue with PSP? Or do I need to find another viewer to properly see the TIF file.
PSP X2
Win 7 Pro, 64 bit
Intel built in graphics.
View 5 Replies
View Related
Dec 5, 2013
Sometimes after editing jpeg files in PaintShop Pro X5, attempting to save them raises an error and they can only be saved to a different file name. After closing out of PSP, the original file cannot be deleted in Windows Explorer. Shift-Delete removes the file from the list momentarily, but a refresh brings it back. Normal delete (to Recycle Bin) raises an error that admin authority is required, but clicking to proceed fails. Starting Windows Explorer as administrator does not resolve the problem. Process Explorer doesn't show PSP or any component of it that I recognize still running (and perhaps having exclusive control of the file). After a reboot, the file can be deleted. I have observed this problem on both machines where the software is loaded and registered. Both machines are malware-free. Both are running Windows 7 x64 Home Premium. Could very well be a Windows problem, but I don't have a similar problem with files that are created or modified with any other application.
View 6 Replies
View Related
Sep 13, 2013
With PSP X6 is it possible to import the PATHS that are inside a PSD file onto their own vector layer inside PSP?
The raster layers from the PSD file come through fine.
View 4 Replies
View Related
Sep 23, 2012
I'm running Paint Shop Pro X. I create a 100x100 pixel JPG using only black and white, then use Alt-L->M->M to collapse down to a single layer, and save the file. When I reload the picture, the black and white are accompanied by several pixels in varying shades of grey. I'm guessing it's trying to apply an anti-alias effect when I load the image but I'm not sure. I've looked through the preferences but haven't found anything. How do I set PSP so it only saves/loads exactly what I created without changing any pixel colors?
View 4 Replies
View Related
Nov 15, 2013
Win 7 64 bit
PSP X5
i have just edited 70 photos using capture editing and apply editing, and have all of them stacked up on the screen.
Can I automatically save them all without having to save each one manually? I tried using the same method as above but it did not save them.
View 2 Replies
View Related
Apr 15, 2012
I'm a new PaintShop Pro X4 user. I Just downloaded a test version and i'm thinking of buying it, but now there's a slight problem.
I own a new Canon Powershot G1X camera and raw-files shot with it don't seem to open correctly in PaintShop Pro X4. The Colors are all wrong.
View 2 Replies
View Related
Jan 1, 2012
I can't open files saved in X4 in v9. I couldn't figure out the text tool in X4 & saved the file so I could finish in v9 but v9 says it is not a valid PSP file. This is very frustrating since I need to be able to use v9 until I learn X4. Second, I have 64 bit version of Thumbnail view installed but it still doesn't allow me to see all of my PSP files in Windows Thumbnail view.
View 7 Replies
View Related
Jun 20, 2012
Is it somehow possible to load .exr (OpenEXR) files with PSP X4? This format seems not to be natively supported, the Photoshop plugin does not seem to work
View 2 Replies
View Related
Sep 12, 2013
have PSP X4. RAW files from my new G15 have colors totally scrambled so I suspect yet another rev of Canon's CR2 format. See CR2 & JPG thumbnails, attached.
Satisfied with X4 and rather not upgrade now. Have installed Canon's "Digital Photo Professional" which correctly reads the CR2s. Rather work in PSP; Canon's app can save RAW as
Exif-TIFF 8bit
TIFF 16bit
and both in combo with Exif-JPEG
will TIFF 16 bit preserve the RAW data and then I could edit in PSP? Other alternatives?
View 6 Replies
View Related
Sep 2, 2013
I can't seem to export more than 1 shape file in PSP X6. When I open a new 200x200 pixel vector file and use the pen tool to create a shape it will not save internally by PSP x6 under any name but "New Path" no matter what name I give the file or the vector layer name.
Whenever I export a second shape I get a pop-up window titled "Export Shape Library" that asks for a name for my new shape. When I enter a unique file name for my new shape I get another pop-up window titled "Duplicate shape names" with a listing of the supposed duplicate file(s). The only name showing though is "New Path". I have never named any of my shapes "New Path" nor named any of my vector layers "new Path" yet I always get this Duplicate shape names pop-up window containing "New Path" as the offending name to resolve.
Whenever I try to use the one shape I did save as "MyShape.PspShape" is shows up as "New Path" in the Preset Shapes listing. I accessed my only saved shape by selecting Preset shape tool/Preset shape then selecting the Shape list(from the tool options palette) and then select the Category "Preset Shapes" from the drop down. It shows up with the name "New Path".
Is there some setting I'm missing so "New Path" will not be the only name saved internally by PSP X6?
I've tried deleting all the files I've created in PSP X6 with the extension ".PspShape " and then restarted PSP X6 and I still am stuck with the "New Path" problem when I export a shape. The one shape I can export is saved on my hard drive with the unique name I gave it but PSP X6 still identifies the shape as being "New Path".
View 1 Replies
View Related
Feb 12, 2012
Can I/How can I open old Corel .wi -files in Corel PaintShop Pro X4? I have a trial version but I could buy the program if it can open and convert those files. Is there any free converter which can do this?
View 1 Replies
View Related
