Paint.NET :: Spiral Text Limitations - Only Accept 65 Characters In Text Box
May 12, 2011
The 'saying' I am trying to create in a spiral format is 165 characters and spaces. I have pasted it into the spiral effects text box. It will only accept 65 characters in the text box.
If I use the circle effect, I can paste all 165 characters and spaces and the circle adjusts to the size where the entire saying fits into one circle.
How do I expand the amount of characters and spaces the spiral text box will accept and use to create the text image I want?
I have a number of issues with PSP X4. When I try to set text I get outlined characters, and I can't figure out how to get the outlines filled with color. I am selecting solid fonts. I'd like to use the figure in making my own tubes as well as signing my photos.
Im working on a desing for a T-shirt and on the back I wanna put some text but I dont wanna put it in a conventional done to death way I wanna try something new. I wanna do text that is spiraling out in a big circle I think its called "nautilus" although I have no idea if that term is correct.
I have an earth image and I want to make some text effects around it. I want to have the text go around the earth figure like Jupiter rings. Moreover, I want to have them as a spiral that goes around the figure much like what a snake do to its pray?
I have some text spiraling inward along a path (about 20 words). How can I make the individual words (or characters) fade as they near the center of the spiral (while leaving new words at the start of the path at their full opacity until they too reach the center)? I've played with various parameters (including start, end, and offset - and opacity) and have come close, but can't quite get it - and after completing spiral, text sometimes becomes opaque again and heads off at tangent to last segment of spiral.
(Using Adobe Master Suite CS6 - After Effects CS6)
Text is allowed only on the outside of a rectangle shape. The text cursor disappears when I try to enter it into the rectangle and when I place it on the edge of the rectangle, it rurns into a slanted "A" and allows texting on the border of the rectangle. Corel Paint Shop Photo Pro X3 (build date Sept 7, 2010). This software came with my new HP Pavilion dv7.
I've draw a blue spiral surface and I got to place text along this black hub line, so it should look as text is printed on blue spiral (perspective and all).I had an idea to outline text, narrow it on one end (to achive perspective) and make pattern brush. But it's pretty hard to tweak path to look realistic (somewhere text is wide and somewhere is narrow, and looks messy).
I am working on a simple function to add/remove a non-printing stamp our drawings to specify a preliminary drawing. The issue is that I cannot seem to get AutoCAD to accept the text height in the Mtext command. Below is the code; try it and see.
I need to create a title in large font for a picture. I can create text borders using blending modes and specifying stroke and fill. For a title however, the characters are too close. I can adjust tracking in InDesign and MS Word ... is there a way to do so in Photoshop CS 3?
I created text, 2 characters on first line, and then 3 characters on second line. I changed the vertical spacing, so that the characters are overlapping a little. But when I change the blending options for the layer style, I can't get it to look like the link above. I don't want to seperate each character into its own layer.
I have a few hundred page CorelDraw document that has one line of text on each page about 6-7 characters long. I need to delete the first 3 characters of text from each line on each page.
I'm trying to create 3d text of asian characters. I do:
Create->Text Set Font to: Meiryo Set Writing System to: Japanese Set Text to: イ Press Create Button
but any Asian character I enter in the text field get converted to a "?" question mark when I press "Create". Is it possible to create Asian text in Maya?
I'm trying to render 24 characters of text with line breaks in 3D, because, as we know, 3D can be very spiffy... but I get:
"Could not complete your request because the path is too complex"
Interesting, I'm on a rocketship workstation with a fairly stealthy config. All is updated to the latest ver., 13.1.2.. Not the greatest card in the world (Quadro 2000), but it seems more than ample for this task..
It works fine with 9 characters on one line... Ok, possibly (or rather likely) I have too much text (24 characters? Line breaks?
My coworker who does not have AutoCAD is trying to find text in a 250 page PDF that I am 98% sure came directly from a DWG. When we search for the text in the basic search command in Acrobat Pro we get nothing. Is there a way for Acrobat to identify the text or mtext as characters, not pixels again and search within those pages to find the text? And yes, it does occur at least twice in the doc that we have noticed.
I'm on Adobe Acrobat 9 Pro and he is on Adobe Acrobat 11 Pro. I have AutoCAD 2013 MEP.
I'm sending this message regarding this link : URL....Just need a favor with all my respect to you and i think you will not let me down asking u for 2 script to divide characters in the textbox like the following:
1st : (TEXT FRAME) : Each letter alone and delete the space character .. with out moving any character from it's position 2nd : (TEXT FRAME) : Each word alone and keep the space character
I have attached two jpg's so you can see what I mean.
I have been importing this text for a long time and ever since X5 it is doing odd things. When I select the text to edit it, it highlights all of the text area in a light blue color. Usually I can get one edit done, if I try and select any other part again, Corel crashes and I have to re-open my program. As you can see what I have to edit is these strange characters that show up where the apostrophe's are supposed to be.
I've been in touch with the makers of the program I am importing FROM and they have no idea why I'd be having trouble with their text. They say all they use is Aerial.
I have a jpg of a Pokémon picture that the filename is Japanese character text, and Gimp ALWAYS give a "failed to open '?????????????.jpg'" error message when opening files containing Japanese characters!!! I can put Japanese characters using the text tool into a picture using gimp so I KNOW it knows the Japanese charset, but that error message ALWAYS occurs with images with filenames containing Japanese characters.
I'm currently trying to use the text tool so I can color a line of text in two differing colors. However when I highlight the characters I want to change the whole line changes.
How do I change the color of specific characters in a line of text?
I'm running a legit version of Photoshop CS2 on Windows XP. There's a number of things that haven't worked since I installed. Let's start with this one! When editing text, pressing any of the arrow keys to move the cursor creates an unwanted charachter like & '%# etc. Also, when in Move tool mode, the arrow keys don't respond at all.
I'm having a problem with Adobe Illustrator CC 17.1.0 with colors, types and groups.
If I select a text or a group and try to change its color, the Fill color stays correct a the panel, but the text or the group maintains the old color, like the screenshot below.
The only way to change color its is selecting all text characters or all group's elements.
as you know, you can write chars on text screen easily: (write-line (strcat "\U+" "2122"))
but if you want to write chars to a text file, this command does not work: (write-line (strcat "\U+" "2122") TxtFileVar)
Here is a part of my code to test: (defun C:HexGen ( / d f S w x y z h c)(setq d '("0" "1" "2" "3" "4" "5" "6" "7" "8" "9" "A" "B" "C" "D" "E" "F") f (open "c:\0000-FFFF.txt" "w"))(foreach w d (foreach x d (foreach y d (progn (setq S "") (foreach z d (progn (setq h (strcat w x y z)) (setq c (strcat "\U+" h));;;<===character (setq S (strcat S " " (strcat h " = " c ))) ) ) (write-line S f) ) ) )) (close f)(startapp "notepad" "c:\0000-FFFF.txt"))
I like the AutoCAPS setting in Mtext, however I occasionally use lower-case text when I am typing, such '2"x4" STUDS' . . . now, I do have a problem with AutoCAPS though:
Example - I copy '2"x4" STUDS" and paste it into another Mtext and the lower-case 'x' is automatically pasted as an uppercase character.
Are there any settings for AutoCAPS, or maybe for the copy/paste command that I can change to allow lower-case characters to be pasted into text when the AutoCAPS is on? It is a bit of a hassle to turn off AutoCAPS and turn it back on.
I do a lot of CD designs, and often I have my text centered on the front covers. When I put the text centered, however, PSP is added an extra space to the end of text, so when I center it on the canvas the text is actually off-center to the left. When I go into edit the text, there is no space on the right of the words to delete.
With the text selected this is how it looks: The right edge of the frame should be flush with the right edge of the last 'T'.
