I want to create an image like this:
[URL].............
I created text, 2 characters on first line, and then 3 characters on second line. I changed the vertical spacing, so that the characters are overlapping a little. But when I change the blending options for the layer style, I can't get it to look like the link above. I don't want to seperate each character into its own layer.
Shapes and text are anti-aliased visibly better with the blending settings in the Advanced Controls section of the Color Settings set as follows: Just as an example, consider the appearance of the edges of this text and circular shape layer in an sRGB document with those settings set vs. cleared:
The difference is subtle, but significant in my opinion, marking the difference between okay quality and good quality. You can see the difference in the partial pixel shading at the curved edges in this enlargement of a portion of the above:
Is there any reason I wouldn't want to just set the above values and use them all the time? I fully understand the concepts of gamma and pixel blending (and I think it's great that Photoshop has this feature), but I ask this question here because there may be subtleties of how Photoshop uses these settings I'm not aware of, and notably they are NOT set this way by default with Photoshop CS6.
I have a series of colored rectangles I'd like to blend into a single rectangle with a smooth blend of the colors, like a rainbow or spectrum.
View 1 Replies View RelatedI am trying to blend two different art brushes with different colors using the blend tool. I'm trying to use two fixed-size line segments of the same length and then applying the two different brushes to those segments ( each art brush is a different color). Then I want to blend them the regular way so their colors transition. However, when I do this, the first shape is a different color, but all subsequent blend steps are the color of the second blended shape. Why is this? It doesn't blend the colors for some reason.
View 4 Replies View RelatedI am retouching scanned images. Here is an enlarged portion of one of the images, to show the type of retouching that I need to do. The green dots are part of the image, and the white background is the color of the paper:
In this case, I want to completely remove the brown spot, and I have selected it with the Patch tool. I want to replace the selected area with the edge of one of the other green dots, and the white background.
Photoshop has the tendency to blend in the unwanted color (brown, in this case) into the replacement pixels. How do I avoid that from happening?
so i hav one person with pale skin and one person tan skin..soo i want to put the head of the pale one on the tan one. The problem is that the skin colors are too different. Is there a way to change the tan skin to pale?
View 2 Replies View Relatedhow to blend colors in Adobe Photoshop CS2
View 1 Replies View RelatedI've just used the align layers feature to stitch together 4 pics into a panorama view. It looks great except the sky is different shades of blue for each of the stiched elements.
Is there an easy way of somehow merging the different blues so you end up with a consistent blue across the panoramic view?
I am trying to blend certain portions of an image where I have done some cut and paste work. I have tried many effects and plugins, but have yet to find a fairly seamless solution (yes I have tried Seamless Texture maker).
I have attached a part of the pic where you can see my copy and paste issues. A
What does the magic wand tool do on PAINT.NET. I need to know What it is for b4 I can follow the instructions referring to me doing something I have no clue about, since I can not be doing it, as I do not know what the function of this tool is. 6 words (or 10) or less?
Or what has happened to the once great function on Adobe software called smudge? Unless I was dreaming, this was a simple function that would allow one to rub two different colored or shaded areas together, to blend them subtly into one color. This allowed one to blend a color or fix a big flaw, with out days of screwing around fixing 1000s of pixels one by one. I am trying to take the shadow out of the background in a picture, I just need to blend the two colors of white together to get rid of the shadow.
Also, why is crop command gone on my paint.net? It will not work. It is there, but it is lite (gone) and will not work.
The 'saying' I am trying to create in a spiral format is 165 characters and spaces. I have pasted it into the spiral effects text box. It will only accept 65 characters in the text box.
If I use the circle effect, I can paste all 165 characters and spaces and the circle adjusts to the size where the entire saying fits into one circle.
How do I expand the amount of characters and spaces the spiral text box will accept and use to create the text image I want?
I need to create a title in large font for a picture. I can create text borders using blending modes and specifying stroke and fill. For a title however, the characters are too close. I can adjust tracking in InDesign and MS Word ... is there a way to do so in Photoshop CS 3?
View 5 Replies View RelatedI'm trying to render 24 characters of text with line breaks in 3D, because, as we know, 3D can be very spiffy... but I get:
"Could not complete your request because the path is too complex"
Interesting, I'm on a rocketship workstation with a fairly stealthy config. All is updated to the latest ver., 13.1.2.. Not the greatest card in the world (Quadro 2000), but it seems more than ample for this task..
It works fine with 9 characters on one line... Ok, possibly (or rather likely) I have too much text (24 characters? Line breaks?
Type some text and try to change orientation to vertical and the program rotates 90 degrees to the right instead of aligning text.
I did a reset of Photoshop settings file (CTRL + SHIFT + ALT on Photoshop boot) and no change of issue.
Video of issue included.
Windows XP SP3
Photoshop CS6 Extended
I'm running a legit version of Photoshop CS2 on Windows XP. There's a number of things that haven't worked since I installed. Let's start with this one! When editing text, pressing any of the arrow keys to move the cursor creates an unwanted charachter like & '%# etc. Also, when in Move tool mode, the arrow keys don't respond at all.
View 1 Replies View RelatedI have a few hundred page CorelDraw document that has one line of text on each page about 6-7 characters long. I need to delete the first 3 characters of text from each line on each page.
View 3 Replies View RelatedI'm trying to create 3d text of asian characters. I do:
Create->Text
Set Font to: Meiryo
Set Writing System to: Japanese
Set Text to: イ
Press Create Button
but any Asian character I enter in the text field get converted to a "?" question mark when I press "Create". Is it possible to create Asian text in Maya?
I tried to type some alt characters today when adding text and they didn't work?
Is there something I need to do to enable this?
I am starting to use LR3 on my iMac (Lion OS)
I noticed that when I search for a filename that contains special characters (e.g. "é" or "ç" or "à"), Lightroom cannot find the word.
So if I look for file petit-dejeuner, LR3 will find it but when I look for petit-déjeuner, LR will not find any picture that contains this word.
I have a lot of pictures with special characters (french)
See picture name below has "déjeuner", it shows in lightroom catalog
When I add "déj" in the text search filter, picture disappears from search results
I have "group1" and inside that group, only one layer: "layer1". The blending mode for "group1" is vivid light and for "layer1" it's "normal".
Now, if I change "group1" to "pass through" and "layer1" to "vivid light" ... the result is completely different, while it should be the same, shouldn't it?
I have a 3images with a common background, but there's different text and each picture has a different part of the background intact. I'm looking for a way to restore the back ground by over layer the images together. I originally tried with one image and selecting the text with the magic wand and filling it with content aware fill. But the results were so so.
So I have a few questions;
1) the images have slightly different orientation. I can't get them to perfectly align, its weird, I really can't do it. I can get it close, but not perfect, is there a simple way ?
2) How do I keep the common element between the images (the background) and remove what's different (the text) ?
I tried overlaying them after having deleted the text, but I still get the damn contour effect.
3) Furthermore, the colors are slightly different between the images, is there a simple way to get them to match ?
I have a number of issues with PSP X4. When I try to set text I get outlined characters, and I can't figure out how to get the outlines filled with color. I am selecting solid fonts. I'd like to use the figure in making my own tubes as well as signing my photos.
View 6 Replies View RelatedYears ago I was able to type %% and a letter so the diameter symbol appeared.
I have forgottoen all the codes over time
Is there an easier way to get those symbosl inserted in a text string (diameter, degree etc) with 2013?
I'm specifically needing to put a superscript number in a text item (eg cubic meteres...).
Does any table of those codes?
My coworker who does not have AutoCAD is trying to find text in a 250 page PDF that I am 98% sure came directly from a DWG. When we search for the text in the basic search command in Acrobat Pro we get nothing. Is there a way for Acrobat to identify the text or mtext as characters, not pixels again and search within those pages to find the text? And yes, it does occur at least twice in the doc that we have noticed.
I'm on Adobe Acrobat 9 Pro and he is on Adobe Acrobat 11 Pro. I have AutoCAD 2013 MEP.
I simply want to type the name of the website and change the first 2 letters to another color without having to do it in 2 separate words .
View 9 Replies View RelatedI'm sending this message regarding this link : URL....Just need a favor with all my respect to you and i think you will not let me down asking u for 2 script to divide characters in the textbox like the following:
1st : (TEXT FRAME) : Each letter alone and delete the space character .. with out moving any character from it's position
2nd : (TEXT FRAME) : Each word alone and keep the space character
"both in multiple text frame".
I have attached two jpg's so you can see what I mean.
I have been importing this text for a long time and ever since X5 it is doing odd things. When I select the text to edit it, it highlights all of the text area in a light blue color. Usually I can get one edit done, if I try and select any other part again, Corel crashes and I have to re-open my program. As you can see what I have to edit is these strange characters that show up where the apostrophe's are supposed to be.
I've been in touch with the makers of the program I am importing FROM and they have no idea why I'd be having trouble with their text. They say all they use is Aerial.
I have a jpg of a Pokémon picture that the filename is Japanese character text, and Gimp ALWAYS give a "failed to open '?????????????.jpg'" error message when opening files containing Japanese characters!!! I can put Japanese characters using the text tool into a picture using gimp so I KNOW it knows the Japanese charset, but that error message ALWAYS occurs with images with filenames containing Japanese characters.
View 11 Replies View RelatedI'm currently trying to use the text tool so I can color a line of text in two differing colors. However when I highlight the characters I want to change the whole line changes.
How do I change the color of specific characters in a line of text?
im having trouble getting the fillet edge command to work. Ive never had a problem with it before but now i get <Modeling Operation Error:
geometry or topology at end of blend too complex Failed to perform blend.Failure while filleting.>
why its not working.
When using the blend tool to blend colour between two objects is there a way to see the anchor points so I know where to click the blend tool. I realise the cursor changes when over one but its seems very cumbersome to have to move it around until it changes rather than click directly on one which I could do if I could see it.
View 2 Replies View Related