Paint.NET :: How To Clean Menu Script Image
Mar 23, 2013
I have many images of Death, Marriage and Birth Act for my Genealogy project, and I would like to know if it is possible to clean them automatically ?
Some of them are really not well scanned, and really hard to read, I managed to correct partially some of them with Paint.net, so I figured If I could have some kind of script that would Darken the Gray part of the Text and another one that would narrow the line so it become more readable .
As an example:
This is the First line of the Text , I placed the Full picture below if required
Attached Thumbnails
View 1 Replies
ADVERTISEMENT
Feb 3, 2012
I just downloaded paint.net after about 6 hours of trying to accomplish my goals with MS Paint - this is a LIFESAVER...I can't believe I didn't hear about it earlier. It's allowed me clean up a scan of a plat map 99%. The only problem that I have now is somehow the black lines got changed to black and shades of gray and I'd just like to clean it up some so that it doesn't look so....jagged.Is there a way to reduce the color pallette to about 6 colors? Or is there a better way?
View 4 Replies
View Related
Jul 21, 2012
I have been working on making this have a transparent background, (everything outside the blue ring, except where the feather goes outside the blue box). When I use the magic wand and delete the background, it has very jagged edges and a lot of pixels that don't clean up. I tried using the eraser to clean them up, but it looks awful.
View 1 Replies
View Related
Feb 12, 2011
I often draw freehand onto a piece of paper and then scan the completed sketch, to change size and clean up sketch lines and then re print...I've recently tried pant.net and i was wondering if there is a tool that cleans up extra sketch lines? as most of my designs are basically tattoo designs, i need to make sure the lines and everything is perfect before taking them to a tattoo artist?
View 2 Replies
View Related
Aug 8, 2006
I have noticed with PS CS2 that when I make an image with the gradient tool that it leaves horizontal lines on the image.
If I'm working with the gradient tool it does not leave a clean image. There are always some vertical, horizontal, or angulared lines ,,,or even circular lines that I don't want in my images.
When I make the images in CS2 and view them, it's fine. But after I save it and open it up in something else or CS2 later, the lines appear on the image.
How do I make an image so that it does not have the horizontal marks or lines in it.
View 7 Replies
View Related
Jul 19, 2013
A co-worker scanned a photo and emailed it to me to edit it and try to improve it, but everything I want to do is grayed out so I can't select it and I can't figure out why. Maybe it has to do with how she scanned it?
It's CMYK, 300 dpi, and 8 bit.
I'd like to sharpen it and adjust the hue/saturation, but they're grayed out.
why this is happening and how I can work around this so I can make the changes I need to make?
View 3 Replies
View Related
Aug 28, 2008
I have multiple pictures of the same product but had to focus on different parts to get those parts in focus. As you can imagine, this meant other parts were out of focus.
I seem to remember during one of the "CS3 is cool" seminars I attended that something along the lines of what I'm hoping to do is possible.
I would like to merge these images together to form one image with everything in focus. Exposure is the same on each of them.
Is this possible (and if so, how) or am I dreaming?
View 14 Replies
View Related
Feb 10, 2013
I captured the attached image from a MythTV recording. A buddy of mine would get a kick out of it if I could find a way to enlarge it such that it looks good on a Letter- or A4-sized printout.
I've enlarged the image 10x and successfully applied the "Despackle" filter, but the lines in the cartoon look pretty blurry. The "Sharpen" and "Antialias" filters don't seem to readily do what I want them to do.
How to clean the image up so that it looks good enlarged?
View 1 Replies
View Related
Dec 10, 2011
I would like to scan an image and clean it afterwards because areas of the same color in the original image (a poker card, so a simple logo with white, black, red, blue and yellow areas) end up to have spots of different color.
Is there a way to improve scan fidelity or edit the image with Gimp in order to smooth these differences and recreate the same areas of uniform color?
View 1 Replies
View Related
Jan 17, 2012
My Vista system has developed a few bugs which are not cured by Norton 360.Dragging a window causes it to maximize in a few programs PASTE does not work in some programs -- including X4..The CROP tool stopped working in X4 but is OK in X5 High-lighting is erratic in WORD etc.
I can only run a "clean" install from my OEM disk which means reloading all applications. I was wondering if I should give up and install Windows 7.
What has been your experience with Windows 7/ Did you do a "clean" install or just the update.
View 2 Replies
View Related
Oct 17, 2013
I want to know that how to clean and sharpen a blur and very poor solution image?
View 7 Replies
View Related
Sep 9, 2012
How to clean screenshots that contain text or other stuff overlapped in an image.
Here's an example:
I'd like to know if it's possible to remove the overlapped bits of screenshots in the upper and bottom left corners and the text in-between using GIMP. The second picture is merely for reference of the material missing(I'm not sure if it can actually be used because the quality is not the same, and I believe the colors are a little off). And if it's indeed possible, how it can be done.
View 3 Replies
View Related
Oct 1, 2012
Any way to convert this image to a vector without having to recreate the entire thing. I need to make it so that it can be used like the rest of the logos on this sponsor backI have tried so many different ways but it's just not coming out right. The client doesn't have access to a better copy of the image, and I need to get this to the printer tomorrow.
View 3 Replies
View Related
Feb 20, 2013
How do you make an image (JPEG) visible again after you turned it off with the contextural Image Ribbon Menu?
Once the image is gone I cannot find how to get the contedxtural Image Menu back.
Inventor Suite 2013 Ultimate
View 2 Replies
View Related
Mar 13, 2011
I managed to remove the background, of an image,(A whit background) and put the image on top of a transparent layer. made a transparent image. When I place this image over a light color background, it looks fine, but when I place it over a dark color background, the edge of the image looks very rough and dirty, I think it's because some of the anti alias from the original image, how can I make it a clean image without going to delete pixel by pixel?
View 2 Replies
View Related
Mar 28, 2013
My thoughts are that it would be nice to be able to add new menus to menu bar a Customize feature that would allow the user to place add-on pluggins such as printer+ in the File Menu, to create New Menus such as a menu in which sub menus can be created and the user can move effect and other functions into these menus, or create additional shortcuts in these sections, also be-able to delete effect and adjustment related files from within a plug-in customize mode feature, also install in new effect/adjustment/etc dll's from inside the program or disable/enable them. auto detection of multiple copies of dll's, and scan for most up to date, with user prompt to delete older or not ask again. also a text selection mask type text would be a very big benefit
and a selection tool similar to the Free-Form Selection tool from MS-Paint where you click in the next point you want the selection to continue to, then close with a CTRL left click or so... as without a USB Pen or Stylus device it is very difficult to do a perfect selection...
ability to add custom windows into "windows" menu, i.e. alternate Palettes, Alternate Tool Sets, enhanced Layers window that switches to an Animations style display for gif and agif, etc, switches to an animated cursor, or animated icon display with play and frame as layer select, as for icon and alike, allowing different icons to be displayed in the layer list in correct size instead of all layers being same size, and all icon layers being listed by colr bit and size, etc...
ability to extract, modify or implant icons into dlls and executables
create or load ICL(icon libraries), create icon dlls...
Page preview with adjustable margin control, better ability to show true picture size when printed(reguardless of dpi) or to allow scaling, ability to print with the included print support recognition of your printer aswell as other built in print modes not provided by your printer software
GPU & CPU + full multi-threaded/multicore utilization and Combined processing for large size images and layers and possible resort to pagefile usage as additional last resort.
View 16 Replies
View Related
Dec 2, 2012
I think i remember spotting something of the like somewhere around the forums, where there is another sub menu, like 'Artistic' or 'Blurs'. One that is called 'Favourites' and you can choose your favourite plugins to put into it in the Effects folder in program files?
(Maybe in PDN 4 a way of doing this in the software, maybe right click on the effect to Uninstall, Add To Favourites etc)
View 15 Replies
View Related
Jun 10, 2011
Newbie to paint.net and I dabble with making my own DVD menus and wanted to expand my creativeness with making my own buttons and graphic images to use on these DVD menus. DVD menu buttons that look good requires image mask overlays and/or manipulating image and color attributes.
Bottom line question: Does Paint.net have all of the tools needed to create DVD menu buttons, and are there tutorials that explain how-to?
View 4 Replies
View Related
Jul 15, 2011
Is it possible to be able to delete individual files from the Open Recent Menu ?
View 2 Replies
View Related
Sep 23, 2012
since i have some heavy scanning to do (i need to scan 300-500 pages from different books), scan button AND a shortcut to the scanner/scan menu. I searched for plugins, none found.
Could it be possible to add the "Get image from scanner or Camera" to the menu bar ? It would reduce clicking a great time for me (and surely many other people too).
View 8 Replies
View Related
Oct 7, 2013
how to customise your context menu to make it like some past versions of PSP, The person asking was using PSP X5 so I reset X5 to the default by holding down the shift key as I double clicked the X5 desktop icon. The X5 default layers context menu shows this:
In X3 I had the layers context menu like this:
In addition a sub context layer is present when we look at the New Mask Layer -
To start customising first Save your current workspace - File > Workspace > Save
then do View > Customise
In the Customise dialog box select Menu and under 'Select context menu' choose Layer Palette
The current Layer Context menu shows up in a new window. The Customise and Layer Palette context window can be dragged into new positions.
Any of the commands can be dragged over onto that Layer Palette context window and positioned where you want. Any of the commands already there can be dragged around to change their order or even removed by dragging out of the the Layer Palette context window. This can be a slow process to drag commands separately amd make a sub menu, so for these complex menu items there is a faster way.
Click the Layers menu item on the Menu bar , and holding the control key down drag the New Mask Layer down and into a position in the Layer Palette context menu and release. Here you can see the New Mask Layer and its sub menu have been placed in one action.
And after Closing the Customise Dialog box I can now see that the New Mask Layer context menu is working well
View 1 Replies
View Related
Sep 28, 2011
When I right click any entry in the Layers pane of PSP8 I get this odd box instead of the context menu:Are the following Usenet newsgroups now closed?
coreI.PaintShopPro8
coreI.PaintShopPro_Scripting
View 7 Replies
View Related
Jun 26, 2011
In PSP X2, the menu options went suddenly missing.
I can see the Menu Bar (File, View, Effects, etc.). However, when I click on, say, File, I can see the drop-down options, but none of the options expand into their sub-menus. All I see is a grey box where the options should be.
I just now was able to reinstall PSP X2 after many months of problems due to the usual "illegally modified" message. It's very frustrating to say the least.
View 3 Replies
View Related
Mar 18, 2011
I need to crop a photo, but the cropping option of grayed out in the menu.
View 1 Replies
View Related
Feb 17, 2013
How do I remove "Open with Corel Paintshop Pro X4" from the right click context menu in explorer? I have one for every version I have installed and it makes the right click menu toooo long.
View 2 Replies
View Related
Sep 22, 2013
In PSP X5 I have colored icons on each drop down menu(same as X4)..Have looked for a way(as in x4, x5)to show image and text in the menu but there is no way to do it.
View 1 Replies
View Related
May 1, 2012
Downloaded the trial - Installed fine, loads fine, everything seems to work fine except the effects menu.
As soon as I try to open the effects menu it crashes... this happens in both Win7 x64 AND Win8 x64 (tried for fun) Corel X5 works fine in both, BUT its the 32 bit version... wonder if i should try that
View 1 Replies
View Related
Oct 11, 2011
how to disable - Content menu (menu on right mouse click in Explorer) - Browse with Corel PaintShop Pro X3/X4 ? I do not use this "feature".
View 8 Replies
View Related
Apr 2, 2013
sometimes I need to do simple thing like crop or resize group of images. I use XnView mostly. But it is possible to somehow run without run PXP x2/x5 my scripts from shell for example? If possible from explorer context menu will be perfect.
Are recorded scripts executed through Python or some DLL?
View 2 Replies
View Related
Jul 27, 2012
I am trying to use the clone brush in paint through the tools menu.
View 1 Replies
View Related
Dec 16, 2011
Add a new menu item "Edit->Copy Flattened" which allows one to copy the selection from ALL the visible layers, instead of just the currently selected layer.
View 1 Replies
View Related
