I am running windows 7 64 bit & have found it impossible to install the conditional hue/saturation plug in.... [URL] ..... it doesn't accept it at all - everything else i have to make a rainbow.
View 9 RepliesMy friend is restoring this car and wants to see how it looks with a black body and red roof and rims but cant seem to change the white to red or the blue to black is this a limitation of the plug in.
View 1 Replies View RelatedI'm trying to change the color of a model's sweater from pink to blue. I select the pink range of the color wheel, and then try to change the hue. But nothing happens.
paint.net 3.5.10 windows 7
difference between lowering the saturation and greyscale.I've tried to remove some banding on a layer and the two versions give different results.
Original:Reducing saturation in 'Hue/Satuation/Lightness' to '-100':
I have a set of around 100 images which I need to edit for hue and saturation. All are similar. Can I batch convert these with PSP X3?
View 2 Replies View RelatedQuestion #1.
Were can I change the "color saturation" to use for my "color changer"?
Question #2.
When using "point-to-point" or "edge seeker", is there a way to go back one or two steps, without having to start all over again?
I created a 8-bit .bmp file which shows 257 (=2^8+1) colors in Windows Picture Viewer. The image shows a black frame with 256 different red colors inside. You may load it with Paint.Net and count the colors. ;-)
You can get the image here 8-bit bitmap showing 257 colors.bmp
When I try to type text onto my image, it's not showing up.
View 10 Replies View Relatedhow to embed hyperlinks or other ways to use conditional branching in a Lightroom slideshow? I have Lightroom 4.3 and do not see anyway to use this method. PowerPoint allows embedding hyperlinks in slides that take you to another set of slides that can expand on the slide in the main slide show. I would like to use this for a rather extensive picture slide show.
View 3 Replies View RelatedI wanted to upgrade from PSP 8, which doesn't work well at all any more since I installed Win7 to the newest Corel's PSP x5.After downloading and installing the 30 day demo I went to view some of my saved PNG & PSD files which have transparencies, but PSP x5 will not display the transparencies, instead it turns their backgrounds into a solid white.
I'm still using GIMP 2 which has no problem showing my transparencies, why won't PSP x5 show them and what do I do I need to do to view my transparencies?
Up until now, we have been entering room names for scheduling manually. I would like to be able to create a psd, whereby the room name is the space style name - *UNLESS* - a value has been entered in any of the manual room name properties. I am sure I can do this with a formula property but I am having trouble wrapping my head around it.
I have 3 manual property definitions in my PSD: (the names corelate to the position in the room tag)
Name_Manual_Top
Name_Manual_Mid
Name_Manual
Additionally I have one which concentates these 3 for the schedules:
Name_Manual_Sched
So I need something that says:
*if* NAME_MANUAL_TOP *or* NAME_MANUAL_MID *or* NAME_MANUAL *=nil*, *then* NAME_MANUAL *and* NAME_MANUAL_SCHEDULE = SPACETYLE *else* this is where I am having trouble - the else is that I want it to act like it always does - if there is data in one of the manual properties
I have done some lisp programming, but not any VBA (but willing to learn)
The Actions Palette has several Insert options (Menu Item, Stop, Path) but not "Insert Conditionals" option. How do I activate the latter option which I thought came built in?
View 7 Replies View RelatedI am trying to make new actions in Photoshop cs6 and I can not find the command that say conditonal actions
View 1 Replies View RelatedI have an alignment running counter clockwise at the perimeter of a septic bed. I’m trying to use a conditional subassembly for the grading.From 0’ to 5’ of fill, grade to existing @ 3:1.Greater than 5” of fill, add a wall (no more than 4’ high) and grade to existing @ 3:1.
View 7 Replies View RelatedI was wondering if there was a way to make conditional formulas with a parameter? So I want a parameter called system. On the pulldown to enter the field under properties.
I want there to be 3 choices (i.e. 1=Air, 2=Water, 3=Gas).
If the user tries to enter any value other than the 3 values specified (whether by typing or pulldown), a message comes up stating they cant do that. The names for the systems have been simplifed for this example but the spelling is critical to the external database. I have tried but but I keep getting the follwoing is not a valid family parameter: X. X because thats the first conditional value.
I am working on implementing Chad Studer's techniques from his presentation at Autodesk University for corridors with conditional subassemblies at the driveways. Basically I created a corridor with two driveways for a test run. When I select the corridor and look at the object viewer, there are several lines going to who knows where at both driveways. But a look at the properties of the finished grade surface generated doesn't show anything out of the ordinary. I had the conditional subassembly look for a polyline on layer "driveway." It appears that there may be a gap in the corridor at each end of the pollyline. I've attached the drawing file.
View 6 Replies View Relatedhow can one create the cut file conditional subassembly or the horizontal conditional subassembly using subassembly composer?
Civil 3D 2013
HP Pavilion dv6 cor i7
16GB RAM
windows 8
What i want to do is ; i have a corridor with both right/left sides ending with linktosurface with fixed slope.In some sections my existing surface is not wide enough to get intersection with link to surface with fixed slope. So i want to use this "conditional horizontal target " if my surface is not enough wide for intersection then just intersect or go to the edge of my existing surface. But i learned that surfaces cannot be used as an offset target with that subassembly.
View 9 Replies View RelatedUsers of Excel will know that you can ask that software to automatically change the color of text depending on its value.
I wonder is this possible in AutoCAD ( Issue release 13 )
The task I have to process is that I have a survey full of spot levels. It would be great of there was a lisp or script or some other device that would change the colour of the spot levels depending on the numerical value of the number.
E.g. - all values less than 100.00 - turn blue
all values equal to or greater than 100.00 - turn yellow
I have this code and would like to finish it according to parole but do not know the command to do it.
var docRef = activeDocument;
var selectedItems = app.docRef.selection;
if (selectedItems.lenght < 1) {
alert("No object is selected.")
}
Not sure why but, none of my presets on the right-hand side pane is showing up. How do I fix this without (i guess) re-installing PSP? I've included a screen capture below.
View 2 Replies View RelatedI am sure i saw that somewhere but how do i get the icons to show back instead of the bare text list of the drop down menus? In the old versions, it was easier to find my way around if i had to change version and the list might not have been in the same order, or if i was making a tutorial and someone had a PSP in a different language; i could just display the icon instead of the name for the other person to be able to identify which tool i was talking about. But in later versions, they are gone. How do i get them back?
View 3 Replies View RelatedSome of the images I have taken with my Olympus 7010 still camera, when opened up in PSPro X, are not showing correctly.A portion of the image is sectioned and the smaller part of the image has moved along horizontally, the effect being that for instance, a person's head is not on the body but further along the image. This only happens now and again but is annoying, the last time 2 out of 24 images were like this.They were loaded on to my pc via the camera's card,in a card reader.
View 6 Replies View RelatedI use a simple If/ElseIf code to suppress / uns uppress & reposition holes on a plate to ensure the desired number of fixing hole pairs.
The hole positions will change and suppress/unsuppress depending on the value of the Tie Rod Pitch (vertical) and the O/A length of this plate (and pressure inside the radiator but this is sorted in Excel).
For example PitchMax = 500mm, BP_2ndS= 1600mm (plate length)
If (3 * TieRodPitch_MAX_2ndS ) < BP_2ndS < (4 * TieRodPitch_MAX_2ndS) Then
...
For some reason some times the parameters don’t update in the hole and pattern features after running the rule thus they are in the wrong position or not suppressed/unsuppressed. When I rearrange the If/ElseIf codes it may work. All I change is just replace ElseIfs with If-End Ifs or the other way around...
Which does not make any sense to me, since I change nothing in the parameters or conditions. Is this code structured poorly?
p.s. this is an engine radiator and the number of tie rod pairs depend on the height of the block, pressure inside, width, etc.
The part fie has the code.
In particular, I am attempting the infamous task of creating driveway openings using a horizontal target with my sub-assemblies. I referred to the AU 2010 video tutorial that gets passed around here on the boards, and for the most part, it works with ONE tiny exception.
Like in the AU video, I set my conditional target to look for a particular layer, and I first attempted the exercise by placing ONE polyline (i.e. driveway opening) on the layer, and set set conditional "found" and "not found" targets to find this pline. The target found the pline on the layer on the right side of the road where I drew it, and created the opening as hoped, but it created an opening on the LEFT side of the road as well!
What do I have to do to prevent the conditional horizontal targets from ignoring the exact opposite side of the road? In my assembly, the left conditions are set to LEFT, and the right conditions are set to RIGHT, but when the corridor gets modeled, BOTH sides of the road will show an opening even if there is only one pline drawn.
We are using AutoCad 2012. Our company have more than 32 disciplines. For any projects the drawings are prepared with many disciplines. Civil does the civil drawing portions, water does the water pipeline portion, electrical does the electrical cable layout portions etc. etc. Each departments have their own set of layers in the drawing.
Now the problem is civil can accidentally modify the entities of electrical departments / utility departments. Though we lock the other disciplines layers programmetrically, but user can unlock the other disciplines layers easily if he wish to. Can we make those other disciplines layers read only? So that users can draw / modify in his own discipline layers but can not do that in other disciplines layer. But he can refer those layers / copy entities from those layers if he wish to? Some sort of xref type of thing is required, but we can not use xrefs as we work in a single drawing and our custom drawing management system is integrated with this type of file system accross the offices.
I need to create a corridor that has this section. So I'm using this assembly:
on which I put 3 conditional fill subassemblies on point A, one for fill conditions of more than 2 m that would daylight at 2:1 until it reaches 2 m down and then daylights at 1:3 until it reaches the EG. Then I have another for fill conditions of less than 2 m that only daylights at 2:1 to the EG, and the last one is for all cut conditions.
As expected I have the following problem in some stations that have fill conditions on A of less than 2 m but more than 2 m on B:
Is there any way I can make B the comparison point without having the following problem on cut conditions?
Or that I could create an assembly with the condition that when I have a fill of more than 2 m on point B it daylights, from point B, at 1:3; but when B would be on cut conditions it daylights from A?
I have checked my settings from PSPx3 with PSPx4 and everything seems the same when using the paintbrush tool but yet every time no matter the hardness level of the brush i end up with a white border on my texture .. NOT visible inside the program itself but becomes visible once I apply the texture to avatar.
View 4 Replies View RelatedOne thing I never liked about Corel PhotoPaint X5 was that a pixel grid appeared when you zoomed in. It is possible to turn this off on a per-document basis, but not globally. Now, I see X6 still didn't fix this.
View 3 Replies View RelatedI just learned how to make the background of my images transparent and am learning how to use layers. I am trying to save my pictures to picasa and photoshop so they are backed up and I can easily access them from any computer. I noticed that some of the pics are showing up all black. It's like the colors are inverted almost. I can kinda see the image in white, but mostly the whole thing is black. I noticed the same thing happened when I tried to open some of the images in paint.
I checked to see if they are all the same file type and they are not. Some are gif and some are png.
Also, some of my images won't open in windows photo gallery. They open in a blank web page. I originally go to my pictures and find them there, but when I click on them they open a page in IE instead of windows photo gallery so I can't crop them or anything.
I am trying to work on a project where I print silhouettes or simple images on vintage sheet music to use as art. I need to be able to take them to a print shop to have this done and I can't do that if the images show up black or won't open in a regular program.
I am attaching a pic that saved black like I talked about and a pic of what it is supposed to look like.
I have an issue with a transparent image. So, I have an image of someone & I want to paste an image of a transparent heart around their face, which I also have. I open the heart in Paint.net & notice the checkerboard background, which means that the background is transparent. I then copy & paste it onto the image of the person but the heart still has the checkerboard background instead of being transparent & it is covering the face. Also, when I saved the heart image on my Mac desktop, the thumbnail had a white background but when I opened it in Preview & iPhoto, it was transparent.
PS: I have Parallels Desktop so I'm running Mac & Windows side-by-side.