My problem is that i have a curves but i need to add more vertex in it and i now that is possible but i forget how and another thing if any tutorial about curves and manipulate.
View 2 Replies
Maya 12 Hotfix 2, MacOS 10.6.8
When I am selecting objects, even in object mode I am getting this onslaught of bright yellow vertices, as though I had vertices selected in preferences or hotkeys... but I don't. All that stuff is off in my preferences. I can't seem to make it go away. Can't see faces for all the vertices cluttering up the view. Happening in all the panels.
Is there some way to make the Scale Tool stop when multiple selected verts or edges are aligned, like in Max? I've noticed that you can overshoot when trying to align this way. I suppose there is always snapping to grid..
View 2 Replies View RelatedWhat I'd like to know is whether Maya can do accuracy.
For instance: Is it possible for me to select two edges or vertices and type in an exact distance that I would like to have between them.
Very fine accuracy is not required.
I noticed that when a face is selected, vertices and edges in the near vicinity glow orange, and are affected when the primary selection is translated/rotated. Is there a way to modify only the primary selection without any secondary effects?
I know in other 3D modeling software it is possible to transform individual faces without deforming the surrounding geometry. Is there a setting that I need to change?
I worked for some time with the free program blender to create my scenes and objects. Because I want to study the subject 'Technical Directing' I started learning how to work with Maya, the more "professional" software.
Although I read through the considered topic of the GettingStarted tutorial, I've still a question to you:
How can I create a face between already existing vertices? This would really improve my workflow.
Is there any other method for scaling an object in it's position using the vertices?
For example if you modeled wires or cables or bars and deleted the history but now you think they are too thick or too thin and you want to scale down without compromising their positions.
Look how I found 2 solutions, the cluster option takes more time.
I could not make a single cable on a floor thin out uniformly with the scale tool option. It did work with cluster on each bend but is a bit tedious.
lets say I marquee select the vertices on a cube in an orthographic view (top view or side view) only the vertices facing the camera get selected. And to clarify, CAMERA BASED SELECTION IS TURNED OFF. Also, not sure if it is related, but backface culling in preferences is also turned off. This usually will not happen in perspective view; but yesterday it did start happening in perspective view as well. And even more strange, it does not affect all meshes in the scene. Only some will react this way.
This bug only recently started happening and it is driving me nuts. I have been running 2013 on this machine since it was released, but not until recently did this bug start to occur; so I am wondering if I accidentally turned something on/off?
I'm having a huge problem trying to select the vertices both in the front and the back of my object. I am familiar with backface culling, and the option is not working. I have tried toggling backface culling in the viewport, preferences, mesh component display and polygon display options. None of these options work. I want to be able to select all the vertices on a model, regardless of certain objects/faces being in the way. However, if there is a face in front of the vertice I am trying to select, Maya won't let me select it.
View 3 Replies View RelatedI am working in meters.
I can not seem to select vertices that are "farther" from the camera.
If I scale the object down - I can start selecting multiple verts again.
I'm new to Maya. I'm looking for the option on how to deselect these pink vertex from my model. (photo)
View 2 Replies View RelatedI'm working with a polygon plane and I've moved the vertices on the edges to where I want them. Now I want to set all the non-edge (interior?) vertices equal distance apart from one another. Is there a function or an easier way to do this or do I have to do it manually?
View 1 Replies View RelatedWould this be a problem when exporting, sculpting, final rendering etc. Or would i have to rebuild the edges?
View 2 Replies View RelatedIs there a way of scaling or transforming vertices uniformly without having to clean up some of the vertices afterwards.The closest attempt I have got is to switch the move tool to normals but this still requires a bit of straightening up afterwards.
View 2 Replies View RelatedI am trying out Maya 2012 and when i select faces or vertices and try to move on individually, the whole model move. I don't need that, i just need to move the face or vertice alone not the whole image. Also is there any way to download tutorial and installing it into Maya 2012. where i am working with Maya 2012 don't have internet to browse right away.
View 5 Replies View RelatedI am trying to model the following simple structure:
I made this example by creating a new polygonal cylinder, rotating the top edges that are to the right of the x-axis and repositioning the affected vertices afterwards, but doing it that way just doesnt feel right, it seems too unclean to me.
I would like the affected vertices to only move on a given axis when rotating the edges, so I dont need to reposition them after the rotate operation. I tried to illustrate what I mean in the following screenshot:
The edges I want to rotate are marked in red, the vertices that are supposed to only move on the y-axis are marked in green. The arrows indicate the desired movement.
Is this way of rotating an edge possible with the rotate tool or something?
I have a bunch of curves that is going to drive nhair. However I'd like to use the "soft modification tool" to do further adjustments to the curves. But I'd want to pin the root of the curves so it doesn't fly off the head when I use soft modification. Is there any way I can lock or pin the root CV of the curve? (its a cubic nurbs curve)
View 1 Replies View RelatedI'm working out of the Mastering Autodesk Maya 2011 book and am on page 135. (I'm on a MAC)
Tool: Rebuild Curve (after creating curve with): EP Curve Tool
I'm trying to rebuild a curve I just made but when I hit "rebuild" I get the error message:
//Error: Nothing was selected to rebuild. You must select NURBS curves or curve on surface. But it's strange, I DO have it selected. In the Outliner I have it highlighted and the curve is highlighted yellow.
The strange thing is when the curve is not highlighted it is RED? I also don't seem to be able to select it with the cursor - only in the Outliner.
I created the curve with the CV Curve tool by snapping to the ends of 2 other curves and then hitting "enter".
I'm guessing the fact the created curve is red when unselected is telling me something is wrong with the curve but I'm unsure.
I was watching a tutorial on digital tutors and they Revolved a CV Curve to make a tire, and I want to know how to extend a curve along an axis instead of revolve it.I painted in the Right viewer to show what I want to achieve.
View 2 Replies View RelatedI am trying to extrude a cube along a CV curve, but I seem to be running into two issues.
Here is the first one.
[URL].....
For some odd reason I am not seeing the option called "use selected curve for extrusion" in the extrude window. Does it even exist in Maya 2012? Or did they take it out?
And here is my second issue.
[URL]....
Since there is no option called "use selected curve for extrusion", I have to experiment with the "Poly Extrude Curve" options. But when I do....the mesh gets all messed up and it always seems to come to a point at the other end of the CV curve.
Why can I not see the option "use selected curve for extrusion"? And why does my mesh keep coming to a point at the end of my CV curve?
i am trying to add CV curves to a scene that I already created.
whenever I draw the curve in side view, it is actually nowhere near the object that I wanted it to be near. Its like super far away and im not sure how to move it to the right spot.
Is there some method to add the curve based on a position of an object?
I am trying to make some trim work to go on a project of mine. Im using a shape then tryig to extrude down the curve is there a way to make the corner tight or a plugin to make trim work easier. you can see in the first image what im trying to make and the second my curve and what i get when im done.
View 1 Replies View RelatedIt's possible in maya to sweep a profile along a closed curve? Like in 3DsMax, for example to make a window frame with a particular section profile?
View 1 Replies View RelatedI'm rigging a model of a robot and I have wires (nurbs circles extruded along a curve) attaching to two objects that are on different joints. I have it rigged so that when the first joint moves, half of the CVs of all the wires (in a control cluster) move along with the joint (and, in turn, the object they are attached to). This much works fine, the extruded nurb follows the curve and stays the same diameter from start to finish. My problem starts with the rigging of the second joint (the second joint is the parent of the first joint). I've tried many different ways of rigging it, but as I'm only just starting rigging my thought process isn't quite a straight line yet. Basically my problem is when the source curves physically move, the extruded surface goes twice the distance as displayed in the picture below.
I need to know how to get the extruded surface to always be in the same place as the curve with out breaking the connection.
I have traced out this piece of geometry using CV curve and then used loft to convert the Curves into actual geometry. I need to have one solid piece of geometry to project an image onto, how can I convert this to one solid piece? I have attached my .mb file.horro_chair.mb.zip
View 3 Replies View RelatedWindows 7, 64 bit, Civil 3D 2010
I'm trying to create a surface using feature lines. I have an alignment and profile that I have created a dynamic feature line. However, on a horizontal curve, it apparently creates a vertex at the start and beginning of the curve, and nothing on the curve, so it triangulates between those two points and that's it.
Do I need to play with spiral tessellation (0.25), mid-ordinate distance (0.1) to get some points along the curve?
Why won't these vertices connect?
View 6 Replies View RelatedI'm playing around with modelling projections of hypercubes and am having trouble figuring out how to connect the corresponding vertices.
View 1 Replies View RelatedI was trying to connect the two vertices in my model. I tried connect and cut but nothing seems to work. I am attaching an image of the model in the attachments. The reason i want the vertices connected is want to fill the are thats not solid in the image. I tried the cap option for this after selecting the border but it does some wierd stuff. It doesn't fill the area uniformly.
View 3 Replies View RelatedWhen I'm editing an editable poly and I select vertices they disappear. I'm using max 2012 design and the nitrous driver. It only happens in wireframe and hidden line mode.
Max Design 2012, Windows 7 64
Quadro 4000
Dual Xeon X5650 2.67 GHz, 24Gb Ram
How can I connect vertices with edges or create a shape. I have no edges. CONNECT button won't work. Here is the picture.
View 8 Replies View Related
