Maya Modeling :: Scaling Vertices Uniformly?
Mar 7, 2013
Is there any other method for scaling an object in it's position using the vertices?
For example if you modeled wires or cables or bars and deleted the history but now you think they are too thick or too thin and you want to scale down without compromising their positions.
Look how I found 2 solutions, the cluster option takes more time.
I could not make a single cable on a floor thin out uniformly with the scale tool option. It did work with cluster on each bend but is a bit tedious.
View 3 Replies
ADVERTISEMENT
Jun 26, 2011
Is there a way of scaling or transforming vertices uniformly without having to clean up some of the vertices afterwards.The closest attempt I have got is to switch the move tool to normals but this still requires a bit of straightening up afterwards.
View 2 Replies
View Related
Feb 17, 2012
Maya 12 Hotfix 2, MacOS 10.6.8
When I am selecting objects, even in object mode I am getting this onslaught of bright yellow vertices, as though I had vertices selected in preferences or hotkeys... but I don't. All that stuff is off in my preferences. I can't seem to make it go away. Can't see faces for all the vertices cluttering up the view. Happening in all the panels.
View 1 Replies
View Related
Jul 30, 2011
My problem is that i have a curves but i need to add more vertex in it and i now that is possible but i forget how and another thing if any tutorial about curves and manipulate.
View 2 Replies
View Related
Oct 12, 2011
Is there some way to make the Scale Tool stop when multiple selected verts or edges are aligned, like in Max? I've noticed that you can overshoot when trying to align this way. I suppose there is always snapping to grid..
View 2 Replies
View Related
Jan 23, 2012
What I'd like to know is whether Maya can do accuracy.
For instance: Is it possible for me to select two edges or vertices and type in an exact distance that I would like to have between them.
Very fine accuracy is not required.
View 1 Replies
View Related
Oct 19, 2011
I noticed that when a face is selected, vertices and edges in the near vicinity glow orange, and are affected when the primary selection is translated/rotated. Is there a way to modify only the primary selection without any secondary effects?
I know in other 3D modeling software it is possible to transform individual faces without deforming the surrounding geometry. Is there a setting that I need to change?
View 4 Replies
View Related
Nov 20, 2010
I worked for some time with the free program blender to create my scenes and objects. Because I want to study the subject 'Technical Directing' I started learning how to work with Maya, the more "professional" software.
Although I read through the considered topic of the GettingStarted tutorial, I've still a question to you:
How can I create a face between already existing vertices? This would really improve my workflow.
View 9 Replies
View Related
Aug 17, 2012
lets say I marquee select the vertices on a cube in an orthographic view (top view or side view) only the vertices facing the camera get selected. And to clarify, CAMERA BASED SELECTION IS TURNED OFF. Also, not sure if it is related, but backface culling in preferences is also turned off. This usually will not happen in perspective view; but yesterday it did start happening in perspective view as well. And even more strange, it does not affect all meshes in the scene. Only some will react this way.
This bug only recently started happening and it is driving me nuts. I have been running 2013 on this machine since it was released, but not until recently did this bug start to occur; so I am wondering if I accidentally turned something on/off?
View 3 Replies
View Related
Mar 5, 2011
I'm having a huge problem trying to select the vertices both in the front and the back of my object. I am familiar with backface culling, and the option is not working. I have tried toggling backface culling in the viewport, preferences, mesh component display and polygon display options. None of these options work. I want to be able to select all the vertices on a model, regardless of certain objects/faces being in the way. However, if there is a face in front of the vertice I am trying to select, Maya won't let me select it.
View 3 Replies
View Related
Mar 29, 2011
I am working in meters.
I can not seem to select vertices that are "farther" from the camera.
If I scale the object down - I can start selecting multiple verts again.
View 3 Replies
View Related
Jul 8, 2011
I'm new to Maya. I'm looking for the option on how to deselect these pink vertex from my model. (photo)
View 2 Replies
View Related
Jun 9, 2012
I'm working with a polygon plane and I've moved the vertices on the edges to where I want them. Now I want to set all the non-edge (interior?) vertices equal distance apart from one another. Is there a function or an easier way to do this or do I have to do it manually?
View 1 Replies
View Related
Nov 12, 2011
Would this be a problem when exporting, sculpting, final rendering etc. Or would i have to rebuild the edges?
View 2 Replies
View Related
Nov 23, 2011
I am trying out Maya 2012 and when i select faces or vertices and try to move on individually, the whole model move. I don't need that, i just need to move the face or vertice alone not the whole image. Also is there any way to download tutorial and installing it into Maya 2012. where i am working with Maya 2012 don't have internet to browse right away.
View 5 Replies
View Related
Nov 17, 2012
I am trying to model the following simple structure:
I made this example by creating a new polygonal cylinder, rotating the top edges that are to the right of the x-axis and repositioning the affected vertices afterwards, but doing it that way just doesnt feel right, it seems too unclean to me.
I would like the affected vertices to only move on a given axis when rotating the edges, so I dont need to reposition them after the rotate operation. I tried to illustrate what I mean in the following screenshot:
The edges I want to rotate are marked in red, the vertices that are supposed to only move on the y-axis are marked in green. The arrows indicate the desired movement.
Is this way of rotating an edge possible with the rotate tool or something?
View 3 Replies
View Related
Sep 4, 2012
i come from 3DS Max and im begining modelling in Maya. I cant find a option for disable negtive scale in Maya.I try modify in the Tool Settings but i cant find how diable the negative scale, where is the option for dissable that.
View 4 Replies
View Related
Dec 18, 2013
I'm attempting to follow instructions from a book to scale down part of a cylinder (as shown below). To quote the instructions directly:
[QUOTE]"Right-click the cylinder, and choose Face from the marking menu. Select the end faces, and scale them down a bit as in Figure 4.43 [ATTACHED]. This gives you the main part of the boiler."[/QUOTE]
I can't get it to scale down the way it is depicted in the photos. I tried selecting the faces and simply scaling, and I also tried selecting the faces and choosing "Extrude" first, and that did not work either.
View 4 Replies
View Related
Sep 8, 2013
It only seems to affect the viewports in which I am locked to a camera angle - e.g. top, side, and front. I can zoom in perfectly fine, but as soon as I zoom out with the scroll bar it immediately puts the camera back to some sort of preset distance. This makes working on the model an incredibly annoying and disruptive task.
While also on the subject of cameras, my zooming in the viewport in which I am able to freely move about, the zoom in and out strength seems to have increased tenfold and is also causing problems. To put it into mathematical terms, the zoom in/out seems to be multiplicative rather than additive. This happened at about the same time the other thing started happening. Is there any way to set the amount of scaling with each movement of the scrollbar
View 1 Replies
View Related
Aug 15, 2013
Why won't these vertices connect?
View 6 Replies
View Related
Jul 12, 2013
I'm playing around with modelling projections of hypercubes and am having trouble figuring out how to connect the corresponding vertices.
View 1 Replies
View Related
Jun 5, 2012
I was trying to connect the two vertices in my model. I tried connect and cut but nothing seems to work. I am attaching an image of the model in the attachments. The reason i want the vertices connected is want to fill the are thats not solid in the image. I tried the cap option for this after selecting the border but it does some wierd stuff. It doesn't fill the area uniformly.
View 3 Replies
View Related
Jan 19, 2012
When I'm editing an editable poly and I select vertices they disappear. I'm using max 2012 design and the nitrous driver. It only happens in wireframe and hidden line mode.
Max Design 2012, Windows 7 64
Quadro 4000
Dual Xeon X5650 2.67 GHz, 24Gb Ram
View 1 Replies
View Related
Feb 10, 2014
How can I connect vertices with edges or create a shape. I have no edges. CONNECT button won't work. Here is the picture.
View 8 Replies
View Related
Aug 28, 2011
I used to use lightwave. With lightwave I could select vertices and then press the "P" key to create a polygon from the selected verts.Now, with max I have found the "create" feature. When using an editable poly, in poly select mode, I select the "create" button and this allows me to do 2 things:
1 - I can create a poly out of nothing by clicking empty space
2 - all verts from existing objects become visible and I select the verts I want to create a new poly.
These seem like really cool tools, if it wasn't for one small detail..With "#2" if I engage the create button, and select a vert - I can no longer rotate around the object and look at it from different angles (by pressing alt+center mouse) UNTIL AFTER I have created the new polygon.
This small detail is kind of annoying because with certain intricate models, I may need to move it around to get to the next vert in line. The only way for it to work, it to make sure I can clearly see ALL verts needed for the new poly with no other geometry or objects obscuring them before starting the create button.
Is it not possible to simply go into "vert selection mode" select a collection of verts (in doing so, be able to rotate around the object between making the selections) and then after I have made my selections simply click a button or key to create a new polygon from the selection?
View 3 Replies
View Related
Jul 18, 2011
I have difficulties using Cloth : Some years ago I had less problems with Cloth but my characters were much taller than real characters, 2 or 3 meters high for example. Now, I have decided to use realistic sizes for my characters, hoping it would improve the result with Cloth, but it is the contrary. With my new characters, 1 unit = 1 centimeter and it is almost impossible to have a perfect result. I was wondering if it is possible to move manually some vertices within Cloth after the simulations for correcting the inaccuracies.
View 2 Replies
View Related
Feb 22, 2013
I am creating a outfit around a basic female model but i was wondering if it is possible to smooth the vertices of the outfit along the body like contouring it to the body instead if selecting every vertices and pushing them in?
3Ds Max 2011
View 2 Replies
View Related
Jan 1, 2012
Is there a way to do this? After perusing some threads on creating edges from vertices, the "Create" tool under "Edit Geometry" doesn't seem to solve my issue. In Blender, you can create a face by selecting at least three vertices and pressing "F". Is there anything similar to that feature in 3DS Max?
I'm using the 2010 version.
View 2 Replies
View Related
Jun 19, 2012
I need a scatter distribution object like a railroad.
I draw a smooth line, then converted it to spline: using sub-object "spline", i used "Outline" to give it some width. Next step, it was converted to a Editable Poly.
At this moment, if i select its vertices and call "Connect", the result is a zig-zag sequence of edges, which are very difficult to clean-up. Another way, select each pair of vertices to apply connect is similar time consuming...
Maybe the picture aid to show the problem.
How to connect those verts like a railroad??? Or about how to create an appropriate scatter distribution object to this work?
View 3 Replies
View Related
Jun 29, 2011
Any way to attach instances of an object to another objects vertices?
View 7 Replies
View Related
Aug 23, 2012
Is there an easy way to copy a line of vertices and have it create new faces on the same object?
I have a rectangle, viewing from the side, that I have already modified extensively. I simply need to create additional vertices / faces along the length of the rectangle.
• Intel i7-975 - 3.33 GHZ
• 24 GB RAM
• Samsung 256 GB - SSD
• NVIDIA GTX 295
• 3ds Max 2013
• Windows 7 - 64 bit
• SpaceMouse Pro
View 4 Replies
View Related
