I have recently downloaded the 2011 version of Maya for my mac. I have a single button mouse and, up to now, when I have needed to right-click I simply press ctrl and click the mouse. However, Maya is not allowing this so I cannot even start to learn the programme.
View 1 RepliesI have two menus that I use often and I would like to add them to my mouse buttons. Attached is a picture of the two menus I like and the two buttons. The Shift + Click has the correct menu already (Osnap menu2) my problem is adding my custom menu to the CTRL + Click doesn't work. I labeled Osnap Menu 1 and 2, 1 being the custom menu I have use in the past and 2 being the default osnap menu that comes with the cui file. How to get the second button to read my menu rather than both read the same osnap 2 menu?
View 1 Replies View RelatedI am using AutoCAD 2012 and I like right click menus.
If I use ctrl + right click, I get a menu with snap options, and if I use shift + right click, I get the same menu. How I can change one of these menus without the other is affected, and perhaps also how to get an alt + right click menu.
PS CS5 crashes when I click on Photomerge from either PS or Bridge. It crashes every time. It doesn't amtter if I have preselected files or click Photomerge from within a blank document.
Laptop is a Dell XPS with plenty of free HDD and 8GB RAM.
Software:
PS CS5.1 x64
WIN7 Pro x64
All software was legally purchased through a registered Adobe dealer but Adobe won't assist me as they've shipped CS6.
I recently upgraded to Maya 2013, and have lost my Right click menu. I get an error message along the lines of "Wrong number of arguments on call to buildBakingMenus" - I'm at work right now, away from Maya, so I do not recall the error #.
When I right click objects, and certain nodes in the hypershade, it does not work. Right clicking does work when holding alt - to zoom and such.
I select the edge and I click unwarp with roadkill, but nothing happens. in the MEL bar gives me this error: Warning: file: C:/Program Files/Autodesk/Maya2011/scripts/RoadKill.mel line 177: Option "Use legacy vertex order" will only take effect when option "Multiple Objects" is enabled.
View 1 Replies View RelatedJust installed Maya 2013 and can't seem to reorder objects in the outliner with the usual middle click drag.
Have to click several times on the name and try again until eventually it does it.
I'm looking to import a rig into a maya scene but every time I do the skeleton joints appear and it's hard to click on the controls. I have opened up the rig file and it's completely fine with no skeleton showing. Why is this happening?
View 4 Replies View RelatedIllustrator CS4
I'm not exactly sure what happened, but suddenly my Type Tool can not select type by double clicking or click and drag any more.
I'm using Illustrator CS4 (14.0.0) on a MacPro with OSX 10.6.8.
I've had to reinstall CS5 after a new Windows installation. Never had a problem with it before, but now I have the issue where if I click on a tool that has sub-tools, it now expands to show them. Before, to access them, I had to click and hold for them to appear. Now with them expanding on the first click, it's interrupting my work flow.
Additional issues have arisen while I'm here, such as, when doing web work, I'll change the rectangular marquee to single pixel horizontal (e.g.), make the selection, do what I want with it, then press M to adjust another single pixel line, but it'll return to the full rectangular marquee, like it resets.
I'm running a test at the moment with Open GL disabled, to test drivers or display issues, but it's doing the same thing.
My System:
Windows 7 Ultimate 64
AMD Phenom 2 X2 550 3.1GHz
4GB RAM
AMD Radeon HD7800.
I have noticed that when I click on any button on the Ribbon Panels it now requires more that one click to activate the button.
View 9 Replies View RelatedSince we updated to CC, I have a very good chance of this not working evey time I try it. Maybe 10% of the time, it will select the word/line as it should. My prefs are identical for this feature as they have for the past several version of InDesign. My partner also has trouble with copy/paste in InDesign and Illustrator as well.
View 20 Replies View RelatedJust reinstalled Photoshop CS5 after needing to reinstall Windows 7. Now instead of being to just grab the tool I want, it produces the flyout each time and I have to re-choose what I want to use. This is rather annoying and time consuming, if I am using the same tool.
Can it be coming from Windows or just Photoshop. I did try resetting the preferences and nothing changed.
I use cs2 and when in photoshop when i left click on any of the tools for instance the pen tool it brings up the menu to select pen tool, freeform pen tool, etc.. rather than just selecting it. I am use to having to right click on the the pen tool to get that menu, i was wondering how i would change it back. Same thing happens when i left click on all the tools on the tools menu, just used the pen tool as an example.
View 5 Replies View RelatedI'd like to construct a Room Tag which I can 'click on' and 'click off' various labels.
View 6 Replies View RelatedI am running late 2011 Macbook Pro 15in. I am using Photoshop CS6 Ext. and there in no 3D menus. They are there, but I can't select them.
View 2 Replies View RelatedI just installed and started to use VS X4; previously I had VS X3 with DVD MovieFactory 7SE. It looks the DVD menus in X4 are about the same as in MovieFactory 7SE. Are there more DVD menu templates available from any source? The ones in the program are good but I would like more variety. I have customized these in the past but I'm looking for some with more creativity than I have.
View 4 Replies View RelatedHow can I (or can I) get my custom menus from my Autocad lt 07 (windows) to my new Autocad Lt 12 for Mac?
View 4 Replies View RelatedFor my organisation, I need to remove some menus in Photoshop CS6.However, when I use Edit --> Menus, and uncheck which menus I don't want to see, "Show All Menu Items" appears.
How I can completely remove some menus, without seeing "Show All Menu Items"?
I've just bought Photoshop CS5 to stay on the upgrade path. In designing (or redesigning) the interface for CS5 and Adobe Camera Raw something seems to have gone awry.
Overlong Menus..Compared to CS4 two of Photoshop CS5's menus have lengthened so that they no longer fit on the screen of my MacBook Pro – the Edit and Layers menus. Thus, the bottom of the menu is off the bottom of the screen (or the top, if you are at the bottom of the menu). Now, it is true that the Edit menu has two more items (32 instead of 30) but the Layers menu has the same number (29 items). In CS5 all the menu text items are more widely vertically spaced leading (pun not intended) to this problem on a MacBook Pro.
The CS4 menus were perfectly legible before so why do this ? What purpose does it serve ?
ACR Disappearing Into the Dock:And using Adobe Camera Raw has a similar problem in that the the ACR window disappears into the Dock at the bottom of the screen. Now I've read Jeff Schewe's response to this in another post where he seems to think that those who use the Dock are in some way mentally deficient (I'm exaggerating to make a point) but, Jeff, some of us like the Dock and find its presence at the bottom of our screens reassuring and useful. BTW, Jeff, removing the Dock doesn't solve the CS5 menu problem. Seems to me to be sloppy design.
What would be better would be to ensure that the scale of the interfaces fits on our screens, would it not ?
Having felt I've been coerced into an early and expensive upgrade by Adobe to stay on the upgrade path is it not unreasonable to expect better?
I am pretty used to VS crashing and becoming corrupted from version 6 to X4. I either reinstall or do a system restore. This time my free dvd template pack is not there but it says it is installed and will not give me the option to download again. I just have the basic DVD menus.
"C:Program Files (x86)CorelCorel VideoStudio Pro X4ContentMenu Template" gives me the four folders (4x3,16x9,HD Basic, HD pop up)
Is there a registry setting I can change to make VS think I did not download the menu pack so I can download it again or is there a better option?
I use VideoStudio X2 for most of my video editing but I haven't been able to recreate a menu that I regularly use in VS9. I wanted the icons to approximately a certain size and the ability to have 2 lines of descriptive text underneath. VS9, whilst perhaps a little clunky in the way it works, does have the flexibility I need. In my DVDs I might have 30 title so I do want 6 on a screen and about 5 menus are created.
I have attached my VS9 template (ignore the Background Image referring to VS10). With this template, I can just keep adding files or create new discs with no changes required to the format and only some minimal text editing. Can VS X2 be tweaked to have a similar menu?
I am using VS X2, very happy with it. I have been burning a few SD DVDs with AVCHD and very happy there, too. The authoring options and menu templates is quite limited when compared to my options when creating a standard DVD.
I need to know what is the best additional program I should use to have more options when creating AVCHD discs and Blu-Ray when that time comes. Is it movie Factory 7? IS MF 6 more compatible with VS X2 and will it give me the same features as 7?
I recently purchased VS X4 Pro. There are only 5 DVD Menus in the Gallery. Is there a source for more?
View 14 Replies View RelatedI just recently reinstalled CS3 on a new computer, and I noticed some things are different from the other CS3 I had installed.
The most annoying thing I noticed is when I left click on one of the toolbar icons (e.g Rectangular Marquee Tool) I get a drop down box showing the other Marquee tools, as if I right clicked it.
I just want to be able to left click and select the active tool, not be bugged to choose which tool every time I click a tool with a drop down list..
I was wondering if it is possible to do drop down navigation menus in PS? The kind where when you move your mouse over a rectangle navbar link another rectangle navbar opens up beside this one with a list of relevant links.
Can this be done in PS as a sort of rollover in image ready perhaps? Could you just create the second navbar and have it hidden in the normal state but visible in the rollover state? Or is there a better way to do this?
I'm trying to make a drop down menu (er...drop side menu) all in Imageready. I made the main button and when you rollover it the side menu comes out but then when I try to click on one f theside menu slices they disappear. They dissapear because in the main button slice, i have them appear on the over state and dissapear on the out state. Is there a way to get them to work? Sorry if this is a little confusing. The only reason that I'm not following pank's tutorial is because I don'y have dreamweaver so I can't make layers like he said.
View 2 Replies View RelatedI am creating a new site to out line my web design business and I want to spice things up a LOT! I got close to the fire and realized that it was burning out of control with information I don?t currently possess. I want to create functional and appealing drop down menus without having to use much if at all possible no java script. I know you can accomplish this with style sheets but the problem is I don?t yet know how.
What I would ultimately like to accomplish is a horizontal drop down menu with multiple sub menus.
My thoughts are that it would be nice to be able to add new menus to menu bar a Customize feature that would allow the user to place add-on pluggins such as printer+ in the File Menu, to create New Menus such as a menu in which sub menus can be created and the user can move effect and other functions into these menus, or create additional shortcuts in these sections, also be-able to delete effect and adjustment related files from within a plug-in customize mode feature, also install in new effect/adjustment/etc dll's from inside the program or disable/enable them. auto detection of multiple copies of dll's, and scan for most up to date, with user prompt to delete older or not ask again. also a text selection mask type text would be a very big benefit
and a selection tool similar to the Free-Form Selection tool from MS-Paint where you click in the next point you want the selection to continue to, then close with a CTRL left click or so... as without a USB Pen or Stylus device it is very difficult to do a perfect selection...
ability to add custom windows into "windows" menu, i.e. alternate Palettes, Alternate Tool Sets, enhanced Layers window that switches to an Animations style display for gif and agif, etc, switches to an animated cursor, or animated icon display with play and frame as layer select, as for icon and alike, allowing different icons to be displayed in the layer list in correct size instead of all layers being same size, and all icon layers being listed by colr bit and size, etc...
ability to extract, modify or implant icons into dlls and executables
create or load ICL(icon libraries), create icon dlls...
Page preview with adjustable margin control, better ability to show true picture size when printed(reguardless of dpi) or to allow scaling, ability to print with the included print support recognition of your printer aswell as other built in print modes not provided by your printer software
GPU & CPU + full multi-threaded/multicore utilization and Combined processing for large size images and layers and possible resort to pagefile usage as additional last resort.
The new Enhanced Menus feature is ace and a welcome thing BUT can you add Vray lights and cameras to it? Its oh-so-close to replacing the normal command panel and toolbar. Add Vray
ANNOYED BECAUSE ALL MY OLD AREA SETTINGS, SIGNATURE, FORUM POSTS etc ARE ALL *GONE*. AND NOW I HAVE DUMB LONG USERNAME INSTEAD OF MY OLD ONE.
I just installed AutoCadLT 2014 on my MAC using Parallels. In my pulldown menus for "Layers" , "Linetypes" , "Colors" etc the words inside and stacked on top of each other and I can only see fragments of the choices. They are also clipped horizontally as well.
How to change the size of the fonts within in these pulldowns and the width of the pulldowns themselves?