In the print Module. I tell it to Print ie: a 5x7 on a 8x10 piece of paper it prints out, again ie: 5.125 x 10.125. and the cell size I tell it should be as stated. but it isnt.
View 2 RepliesI made something exactly 14 inches in illustrator according to the AI ruler. When I print it, it is larger than 14 inches - over 14 1/4 in. Print settings are set to do not scale.
View 3 Replies View RelatedJust got a Epson 3880 printer and learning to use Lightroom 3 with it. I am trying to print a 8x10 image on 8.5x11 paper. I set the cell size to 8x10. While the print looks great it is not 8x10 (larger). Is there some interaction between the margin settings and the cell size that I need to understand?
View 4 Replies View RelatedTake Raw photo - use adjustment layers to modify image - save as PSD - place saved image in indesign - scale to appropriate size - save PDF - Print at printers. Sometimes I get moiré patterns, sometimes I get speckled images like using a sharpening tool or filter far too excessively.
Should I be resizing in Photoshop to exact final dimensions?
I am using GIMP 2.6.11 .I am using it to make DVD jackets among other things and have a template made. It's been about a year since I've done a jacket and made no notes - my bad.The Template is 10.597 inches wide X 7.292 inches high for a 7 mm spine jacket.I have it set in the Image - Print Size as well The big problem I have is trying to set the page setup setting from the File menu - It is stuck at Portrait, A4, Front tray and will not change - it resets every time. It refuses to switch to landscape or US 8.5 x 11.
The Print menu from the File menu only has 2 tabs - nothing like what is shown on the on-line manual. Only A General and Image Setting Tab.The image Setting Tab is useless as nothing I change seems to matter. the maximum size I can enter is H= 5.670" and H= 8.240" I have read section 1.6.2 Printing Photos and all the related links without finding out a thing. And nothing seems relivent. All I would like to do is make a graphic and print it out at an exact (or very close) size. I didnt think it would be so difficult.
I am trying to print from Photoshop CS6 to an Epson PictureMate color printer and an Epson PictureMate 225 printer. In both cases I want to let Photoshop manage color. I am finding no color profile for Epson in the list of profiles provided by Photoshop. The best I can do is choose “display” as my profile. Still my color prints do not match what I see on my screen in Photoshop. They are flat and washed out. How can I obtain print profiles for my Epson Printers to be used with Photoshop 6?
View 2 Replies View RelatedHow do I ensure that I'm printing accurate colors? As color is so subjective how do I confirm that I have it correctly?
View 6 Replies View RelatedI was wondering on font size, in the font list size I put in 1.5 inches in the object size box its 1.146. I was doing stencils for an officer (Army) to mark his clothing for a school and he called me on it. Is there someway to change to actual size or do i need to just deal with it .
View 4 Replies View RelatedI am printing a large amount of print packages for a Sports Club. The photos are not printing to the size request. 5x7's 8x10... Very frustrating. What am I missing? I am printing to a Epson Stylus Photo 1400 using Epson paper and ink.
View 1 Replies View Relatedi have to admit i rarely printed from LR before.most of the time i print from photoshop.but yesterday i had to print a lot of small images so i thought i try LR for it.
i wanted to print a few 35x45mm images on DIN A4 paper.
images dimensions are correct (35x45mm 360 DPI) and it prints as 35x45mm images when i use photoshop.
when i use LR and i set the cell size to 35x45mm the prints come out to small by a couple of millimeters.
LR has not so many print settings i could have messed up.. right?
I am finding that my Lightroom 5 prints are bigger than the settings that I input in the Print module.
View 3 Replies View RelatedI have entered Template Browser in LR4 and I am unable to exit it so that I can resume printing A4 size photo's.
View 4 Replies View RelatedUsing a keyword search "contains all" brought up photos of pictures in which that keyword was not applied to them. I selected these photos and the keyword was not associated with the photos.
View 2 Replies View RelatedI have been unhappy with the colors from raws on my new D7100. It's bad enough it has banding and color cast issues within dark shadows but today I decided to do a test against my D90 and ViewNX and the results conclude what I have been seeing. There is too much yellow and a lack of magenta in the converted raws with LR. Here is an example. I'm considering sending it back until this is resolved. Copy and paste the link into your browse I can't seem to be able to paste a working copy of it into this post. I remember when I first got my D80 how bad the color profile was, I had to shoot Jpegs for highend kitchens because I couldn't get the wood tones to look correct. Eventually the profile got updated.
[URL]
The photos I edit through LR do not print the way they look in the develop module. I have calibrated my monitors and I am printing in photo mode on my Epson printer. The same printer produces accurate color for photos that have not been treated in LR. I am using the free trial version of LR.
View 1 Replies View RelatedI have just bought and installed Lightroom 5 and need to set my print size to A3 and in the future even bigger. I do not have the facility at home and need to have them sized correctly for the print shop so they do not have to waste time resizing them. I am at a loss how to do this. I cant find any settings for this size print. A3 is roughly 42 x 29.7 cm.
View 2 Replies View RelatedHow do I convert the colour profile of a Lightroom custom printing package from Adobe Prophoto to sRGB before printing? For that matter, how do I save the thing? I have no interest in saving the template, or the collection separately, since neither has any use without the other. And without saving them as one finished item, I have no way to convert the colour profile of that item. I can see clearly from the appearance of the print preview that the above mentioned colour profile conversion is required.
View 1 Replies View RelatedI have some art work that is 18" tall by 36" wide. How to create this print size as the program does not identify that as a print size. Once the program identifies it I will just select PDF as my printer and print it as a PDF file. Question is, how do I do that?
View 6 Replies View RelatedI created a document in photoshop cs3 and cs4 @ 7wX11h inches @ 300 dpi. When I go to print it the image it prints about 3/16ths too wide.
I'm printing from a home printer just to show the client the product. Then i want to send to a printer for production. I need to get the sizing right!
how I can print an image at one to one so that the print is at size as. I believe there is a quick way of calculating this in PS but unsure where to begin.
The image which will contain a ruler as a point of reference needs to be printed at its actual size.
I have created a document in photoshop sized 8.5x11, the same size as my printer paper, at 300dpi. I am using the ruler guidelines onscreen to make an image 6 3/4" wide, but it is printing out too small at 6".
I am not measuring onscreen by putting an actual ruler up against my screen, I am using the photoshop ruler (so I am sizing according to the 6 3/4" ruler in photoshop, even if it is 8" on my screen)
In the print settings, I uncheck "scale to fit media" and "center image".
I'm used to HP ploters, but our division got a canon last year. I'm not able to plot a 36x48 sheet on this plotter. For some reason, the plotter cuts off the length/width at 36". It's like the plotter is forcing it to cut at 36". When I choose to the paper size, "ARCH E borderless" shows. The plot preview looks fine, but the hard copy is always cut off.
View 1 Replies View RelatedI want to print pdf. Actual pdf size is 2.27mb. But when I send it on plotter for plot it , pdf file size increase up to 46.9MB. I wait more than 60 min for plot. But nothing came out.
Plotter display windows shown as processing print.
How I print it fast or how I decrease pdf size for printing.
I drew up a logo design a while ago and when I finally printed it, I realized I know nothing about scaling my drawing to an actual real printed size. Is there a way to know the size in inches and/or a way to see it on the page (i.e. a print preview). Also, when I do print, it's majorly fuzzy for some reason.
View 1 Replies View RelatedI have CS5. The photos coming out of the camera are 300 dpi and approx 12.8" x 19.2". When I crop the photo to 300 dpi and 8x10 and send it to print, the printer says the photo is too small. It comes across as 72 dip and 8.333" x 6.667". I was expecting photos to come out of the camera with 72 dpi and a huge length x width. I can then crop and print without issue. Is there a photoshop setting that needs to be set? Is there a different work flow I need to use? I shoot with a 5D Mark III.
View 1 Replies View RelatedI'm having an issue when printing to PFD from Photoshop. My image size is 7" x 10" and when I view it in the print preview window (I add crop marks) it looks fine printing to 8.5" x 11". Once printed, the image shrinks to about 1/10 the size and is in the upper left hand corner of the letter sized sheet.
View 3 Replies View Relatedi am very much confused in printing photo in various number in same size..
View 5 Replies View RelatedI created a small object using Inventor 2013.
The base of this object is just a cylinder with diameter of 3.599 mm. (see attached image M1).
Now I wanted to 3D print this object. Inventor creates the *.STL-file.
The Inventor 3D print dialog shows a witdh and length of arround 4.12 mm by a scaling of 1.000 !?!
Why it is bigger than what I created? It should be 3.6 mm.
If I upload this to shapeways they show also 0.4 cm width / length. So my object will printed a littlebit larger than I created !?!
Even if I change the resolution inside the STL-dialog it does not change anything. Why the STL-Object is bigger than the model I created?
Is it possible to setup inventor to print (for example) to BY DEFAULT print A size in letter format, B size in 11x17 ect?
----------------------
Inventor 2014 PDS
I was designing a membership card for a company and set a resolution of 300 and I can't remember what document size I set originally.
Anyway, my sizes now are as follows:
Pixel Dimensions: W 700, H 410
Document Size: 5.93cm X 3.47cm
Resolution: 300 pixels/inch
When I save my psd as any image type, my image is MUCH bigger than 5.93 x 3.47. How can I save it so that it is the size I want, but still the good image quality (resolution) and so I get the same size when I print it.
I was designing a membership card for a company and set a resolution of 300 and I can't remember what document size I set originally.
my sizes now are as follows:
Pixel Dimensions: W 700, H 410
Document Size: 5.93cm X 3.47cm
Resolution: 300 pixels/inch
When I save my psd as any image type, my image is MUCH bigger than 5.93 x 3.47. How can I save it so that it is the size I want, but still the good image quality (resolution) and so I get the same size when I print it.