I have some art work that is 18" tall by 36" wide. How to create this print size as the program does not identify that as a print size. Once the program identifies it I will just select PDF as my printer and print it as a PDF file. Question is, how do I do that?
View 6 RepliesWhen I'm printing on CorelDRAW X6, it show me the wrong size and orientation , everything was perfect on CorelDRAW X5 and I'm fully updated. What can I do?
View 3 Replies View RelatedMy CorelMacros.CreateColorSwatch macro has stopped dumping the swatches into whatever blank Letter-sized document I have open (which is how it used to work) and instead it is creating a new document, at 4.25" wide x 7" high, and dumping the swatches into that. Using Pantone Solid Coated, but it's doing this regardless of what palette I choose.
There is no option in the Macro's dialog box to alter or even instantiate a page size, and I cannot find in the code of the macro where to set this variable.
Export is weird, maintain size is checked but it dose not give the proper size. My page size is 922x1344, but the image exported is half that size.
View 14 Replies View RelatedI created a document in photoshop cs3 and cs4 @ 7wX11h inches @ 300 dpi. When I go to print it the image it prints about 3/16ths too wide.
I'm printing from a home printer just to show the client the product. Then i want to send to a printer for production. I need to get the sizing right!
how I can print an image at one to one so that the print is at size as. I believe there is a quick way of calculating this in PS but unsure where to begin.
The image which will contain a ruler as a point of reference needs to be printed at its actual size.
I have created a document in photoshop sized 8.5x11, the same size as my printer paper, at 300dpi. I am using the ruler guidelines onscreen to make an image 6 3/4" wide, but it is printing out too small at 6".
I am not measuring onscreen by putting an actual ruler up against my screen, I am using the photoshop ruler (so I am sizing according to the 6 3/4" ruler in photoshop, even if it is 8" on my screen)
In the print settings, I uncheck "scale to fit media" and "center image".
I'm used to HP ploters, but our division got a canon last year. I'm not able to plot a 36x48 sheet on this plotter. For some reason, the plotter cuts off the length/width at 36". It's like the plotter is forcing it to cut at 36". When I choose to the paper size, "ARCH E borderless" shows. The plot preview looks fine, but the hard copy is always cut off.
View 1 Replies View RelatedI want to print pdf. Actual pdf size is 2.27mb. But when I send it on plotter for plot it , pdf file size increase up to 46.9MB. I wait more than 60 min for plot. But nothing came out.
Plotter display windows shown as processing print.
How I print it fast or how I decrease pdf size for printing.
I drew up a logo design a while ago and when I finally printed it, I realized I know nothing about scaling my drawing to an actual real printed size. Is there a way to know the size in inches and/or a way to see it on the page (i.e. a print preview). Also, when I do print, it's majorly fuzzy for some reason.
View 1 Replies View RelatedIn the print Module. I tell it to Print ie: a 5x7 on a 8x10 piece of paper it prints out, again ie: 5.125 x 10.125. and the cell size I tell it should be as stated. but it isnt.
View 2 Replies View RelatedI really can't believe that it is not possible in Corel Draw.
1) How to define size of object, for example rectangle before I actually draw first time the custom shape of the rectangle? So far I draw any rectangle and then change the size which is not professional way I guess, because it causes many problems. (like for example I cant change ratioif it is going to be rectangle with rounded corners)
2) Very often in my work I need to change % size of my artwork or object because a client wants to have something 80% size or 20% smaller. I found it impossible to do because CorelDraw keeps remember all % transformations since original size was created. Now, provided that my 1) problem has no solution we end up in such a situation:
- my first rectangle is always NOT in correct, precise size
- when I amend the size it has a correct size but already has different than 100% value.
- Corel Draw forces me to choose: 100% value and not precise size or correct size and for example 113,9%
I completely don't understand what for is the feature that remembers the original size, it's not so needed in practice especially that IT IS A VALUE BASED ON ALWAYS WRONG INITIAL SIZE. Is it so difficult to place a button next to % value called RESET to 100%? (without going back to initial size of course) I know there are tricks for exampleto group the object temporary with other object but it is not a proper way, is it?
Graphic Designer, Web designer and playing with Video and Audio mixing and editing as well ;-).Working for Large Format Printing company Carrick Signs.
I have CS5. The photos coming out of the camera are 300 dpi and approx 12.8" x 19.2". When I crop the photo to 300 dpi and 8x10 and send it to print, the printer says the photo is too small. It comes across as 72 dip and 8.333" x 6.667". I was expecting photos to come out of the camera with 72 dpi and a huge length x width. I can then crop and print without issue. Is there a photoshop setting that needs to be set? Is there a different work flow I need to use? I shoot with a 5D Mark III.
View 1 Replies View RelatedI'm having an issue when printing to PFD from Photoshop. My image size is 7" x 10" and when I view it in the print preview window (I add crop marks) it looks fine printing to 8.5" x 11". Once printed, the image shrinks to about 1/10 the size and is in the upper left hand corner of the letter sized sheet.
View 3 Replies View Relatedi am very much confused in printing photo in various number in same size..
View 5 Replies View RelatedI created a small object using Inventor 2013.
The base of this object is just a cylinder with diameter of 3.599 mm. (see attached image M1).
Now I wanted to 3D print this object. Inventor creates the *.STL-file.
The Inventor 3D print dialog shows a witdh and length of arround 4.12 mm by a scaling of 1.000 !?!
Why it is bigger than what I created? It should be 3.6 mm.
If I upload this to shapeways they show also 0.4 cm width / length. So my object will printed a littlebit larger than I created !?!
Even if I change the resolution inside the STL-dialog it does not change anything. Why the STL-Object is bigger than the model I created?
Is it possible to setup inventor to print (for example) to BY DEFAULT print A size in letter format, B size in 11x17 ect?
----------------------
Inventor 2014 PDS
I was designing a membership card for a company and set a resolution of 300 and I can't remember what document size I set originally.
Anyway, my sizes now are as follows:
Pixel Dimensions: W 700, H 410
Document Size: 5.93cm X 3.47cm
Resolution: 300 pixels/inch
When I save my psd as any image type, my image is MUCH bigger than 5.93 x 3.47. How can I save it so that it is the size I want, but still the good image quality (resolution) and so I get the same size when I print it.
I was designing a membership card for a company and set a resolution of 300 and I can't remember what document size I set originally.
my sizes now are as follows:
Pixel Dimensions: W 700, H 410
Document Size: 5.93cm X 3.47cm
Resolution: 300 pixels/inch
When I save my psd as any image type, my image is MUCH bigger than 5.93 x 3.47. How can I save it so that it is the size I want, but still the good image quality (resolution) and so I get the same size when I print it.
Im trying to print A0 sheets and was just wondering if its possible to change the paper size to 594 x 1682. Pretty much to have 2 A1 sheets in portrait on top of each other.
View 1 Replies View RelatedActual printing size on the screen,
I’m wondering if there is a tool on the Revit that enables displaying the actual printing size on the screen. This feature is quite useful as we can see exactly how the drawing will precisely looks like on the paper.
For example, if I need to print with a scale of 1:200, then is there a tool that displays the actual size on the screen. Other software, like ArcGIS, has this feature.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I see a "new printing UI" is scheduled for v4, so maybe this will be included in that anyway, but a quick request: it'd be great of PDN would honour the default paper size when printing. I currently need to change from Letter to A4 (which isn't even on the "most popular" list, so it needs a further click to choose "other" first), despite this being the default paper size for the printer selected.
Either using the default paper size of the selected printer, or failing that, remember the previously selected paper size in PDN would save a good amount of frustration for those of us in Europe where A4 is the usual paper size ;-)
I have recently upgraded to CS6. I have attempted printing full documents in illustrator ( I tried a 12.5x18 document). In the print dialog box there is a preview of the full sized document however when I print it only prints 10 inches of the document. I am printing to a Canon IRadv- c5030/5035.
View 1 Replies View RelatedI am printing a large amount of print packages for a Sports Club. The photos are not printing to the size request. 5x7's 8x10... Very frustrating. What am I missing? I am printing to a Epson Stylus Photo 1400 using Epson paper and ink.
View 1 Replies View Relatedi have to admit i rarely printed from LR before.most of the time i print from photoshop.but yesterday i had to print a lot of small images so i thought i try LR for it.
i wanted to print a few 35x45mm images on DIN A4 paper.
images dimensions are correct (35x45mm 360 DPI) and it prints as 35x45mm images when i use photoshop.
when i use LR and i set the cell size to 35x45mm the prints come out to small by a couple of millimeters.
LR has not so many print settings i could have messed up.. right?
I am finding that my Lightroom 5 prints are bigger than the settings that I input in the Print module.
View 3 Replies View RelatedI am trying to convert a psd file that is a 36"X80" banner to a pdf file. In the past, I have printed to PDF and all has been fine. Today the Print to PDF fails... it doesn't give me an error it just pretends like it prints to pdf with the status box popping up for a second, then nothing. So I attempted to Save As a PDF instead this worked, but resulted in pdf with a file size of 453M! This is much larger than the pdf's I was getting before, in the 3-ish M file size..
View 9 Replies View RelatedRunning Mac os x 10.8.2 and Photoshop CS6. I have an Epson R2880 and so far only used Epson paper. I was able to find all the paper settings but i decided to buy a new German paper.
I downloaded the ICC profile, copied it to /Library/ColorSync/Profiles (and actually any other path that i could find in there). When i open the print dialog i cannot set that paper in either Photoshop or the Epson dialog.
I then removed ALL the ICC files from that path and... surprise. All the profiles are still shown in Photoshop.
How can i print my drawing (1400 * 250)m on several A4 paper size,I'm using C3d 2012.
View 3 Replies View Relatedhow do you print wallet size pictures.
View 4 Replies View RelatedI have successfully printed a dwg to a pdf but instead of its file size being 450k it is 1.4 m. This makes sending pdfs via email too cumbersome. It seems that even though the outcome is B&W somewhere along the line "it" thinks it is Color. I noticed that in Page Setup I no longer have the option of "DWG to PDF.pc3".
View 5 Replies View Related