I have LR5 running on windows 8.
I've imported from my camera's memory card into Lightroom 5 , but I retained camera raw (ORF) instead of converting to DNG during import.
how I can convert to DNG having imported native camera raw?
Can photoshop convert .jpg to camera raw file?
View 6 Replies View RelatedHow can I have my external editor (PS CS4) open my files in their native NEF format and not as a copied PSD or TIFF?
I do not want an edit copy and wish to have the RAW file open in photoshop. I have had this option in thw past, but since installing LR 3 on a new computer can not configure to just open the NEF file in Photoshop.
I'm using Lightroom 5.2 on a 27-inch iMac running Mavericks. I want to create a slide show full of photos with a native aspect ratio of 3:2 (from a Nikon D4 and a Nikon D800). I do NOT want the photos to be trimmed along the top and bottom, which is what happens when I choose "Zoom to fill frame" in the Slide Show module. I do NOT want letterboxing along the right and left edges of the photo, which is what I get if I don't choose "Zoom to fill frame" and just export the slide show using the "Export Video" button in the lower left of the Slide Show module. ("Export Video" gives me four choices for "Video Preset," but none of the four is a 3:2 aspect ratio.) I just want a slide show of uncropped 3:2 aspect ratio photos with no border around them whatsoever. Considering how many of the photos taken every day on this planet are still in the 3:2 aspect ratio, I find it hard to believe there isn't a way to do this.
If for some reason there is no way to create such a slide show in Lightroom, I have Creative Suite 5, iPhoto, and iMovie, but I don't want to buy any new software just for this.
I imported my photos from my camera to adobe bridge and they looked great. I had no problems saving them in the file folder that I had chosen and when I open them in Photoshop CS4, they look awful. They are all pixelated and broken up and I really don't think my Nikon D90 had anything to do with this and I am very frustrated. Is there a setting that I am missing that could be the problem? What steps can I take to make sure I haven't missed anything because I find it difficult to enhance photos that look so bad when opened in PS.
View 7 Replies View RelatedI've created a composition with animation in After Effects. Because of the complexity of the composition and its many layers, adding a 3D camera layer to it spawned a whole lot of issues with the wipe effects I had on the pre-existing layers and movement of my layers. So I rendered the composition without the camera layer, nested the .mov into a new comp and added a camera layer. The animation works great but I'm getting a lot of pixelation. Highest HD settings, full resolution, preserving quality of layers when nesting and not sure what's happening.
View 8 Replies View RelatedIs there any way one can convert an imported photo in Jpeg or Bmp or Tiff or any other format into lines in a drawing?
View 7 Replies View RelatedI'm an amateur moving up to LR 3 and have been trying to learn this program by reading the LR3 book by Scott Kelby. He shows that the Camera Calibration feature has some settings for specific cameras yet the drop down menu has none listed. I've upgraded to 3.6 and the images were copied from raw to DNG.
View 6 Replies View RelatedI am relatively new to Lightroom. I have imported Panasonic Lumix DMC-FZ200 raw (.RW2) files into Lightroom 5.3. When I go into the Develop module under the Camera Calibration the only profile that shows up is Adobe Standard. My camera is supported according to the Adobe web site.
View 2 Replies View RelatedI just bought a Nikon D7000 camera & need to convert Nikon RAWS (NEF) files & they are not recognized by my Adobe CS4 on my Mac 0sX 10.6.8
Do I need to update to CS5 or CS6. Also, would like the new software to allow me to still convert older pre-existing RAWS that are in my photo archives.
How to I get camera profiles into LR 4 and Camera Raw?
View 3 Replies View Relatedafter a problem with an anti virus i lost ,ost of the cs6 native plug ins, where can I download them?
View 17 Replies View RelatedI haven't had enough of an application to justify trying to figure it out. At this point however, i've designed a small conversion form that can be called by our engineers and allow them to convert between various units. I'd like to have a button though that allows them to call up the Quick Calc application from within AutoCAD. What i'm wondering is how do i actually call a native autoCAD command? Is it possible and if so where could i find documentation on the syntax. For what it's worth i'm working in C# in VS 2010.
View 4 Replies View RelatedI can't rotate anything in 3ds Max anymore. The only way I've found is to go via the hierarchy pivot box (left hand menu), which isn't much of a workaround.
The rotate gizmo appears, the pie slice appears, angle numbers change when I drag but nothing moves. Is there a quick way of resetting 3ds to defaults? I presume I've switched something on or off that I shouldn't have!
I can rotate merged objects, just not native ones. I grouped a lorry with a box (I wanted to put a logo on the box for the side of the lorry) - when I rotated the lorry, the box stayed put!
Has native scanner support for 64-bit Windows been added to X4, or is it still necessary to purchase a 3rd-party driver (VueScan)? I ask because my copy of X3 is sitting on the shelf unused due to lack of scanner support, however Photoshop Elements 8 is working with the Canon scanner with no issues. It is time to upgrade one of these products and lack of scanner support is a deal breaker for me.
View 3 Replies View RelatedIs it possible to vectorize native PDF files within the AutoCAD 2013 environment. If yes how? Sample PDF file attached.
View 4 Replies View RelatedWhen opening non native dwg files (exports say from solidworks) it doesn't bring the file into the correct areas in relation to the model being in the model space, drawings being in the paper space and not just pasting into Autocad from the non native file.
View 1 Replies View RelatedI exported a part of a Xara design as a .xar file and choose 'selection' when prompted (as opposed to 'drawing'). This successfully create a .xar with just the objects I selected, however when I go to File->Import and select this file the preview panel shows an image of the entire original document, which is misleading as to the contents of the .xar. Bug or not?
View 2 Replies View RelatedPreviously i`m using version 2009 and importing Google earth image and surface works fine. However, recently i tried with version 2010 and i`m having some problem here (imported surface / contour seems ok but the image is too large like 3x or 4x). How to solve that?
View 3 Replies View RelatedWhen I open an image in PS CS6 all is well. Once I move the document, it snaps itself to the top left. If I move it and try to place it somewhere else, it moves itself a little higher to the top left. The more I move it the more it snaps higher. If I move it over 5 times it covers the main menu bar (File Edit Layer View Filter) and so on. This renders the app useless as you can no no longer access the native menu to do anything to the image.
I am on Windows 7x64 (SP1) with a Wacom Tablet. Within PS I've disabled, Tabs for windows (Both check marks) as well as Flick Panning, and animated zoom.
I have always flattened everything out of CDR whenever there is any transparencies involved, this works fine, you just have to deal with large bitmaps. Now in recent discussions some respected contributors have touted using the X3 pdf setting with Compatibility set to Ver9. That works, transparencies print without the yellow box ....fine... but.
I design with CMYK colours ( I know.. BIG discussion that has been addressed many times) and use RGB images (because they are usually client supplied or our Stock site only supplies RGB).
My problem is in my PDF settings I have everything set to export as Native which works well on the Roland using Max Impact and even if I set compatibility to PDF Ver 9 transparency will still have the yellow box.
To get transparencies to work without flattening, everything has to be exported as CMYK and as you know RGB blue goes purple when you do this and the RGB images just don't look as good.Is there a way to get transparency to work in a PDF with exporting everything as Native and using PDF Ver 9?
I cannot find a way to keep the native resolution when exporting it to this size, even using the same as project settings, it makes it 720x480, when i look at the file when clicking properties it says uncompressed 1920x1080, how do i export it as such just a little more compressed?
View 2 Replies View RelatedFor a long time I'd been using Gimp 2.8.0 on my Mac Mini. (Running Lion) It worked well, but it had a few annoying Wacom-related bugs.
Today I upgraded to Gimp 2.8.6 ... and it's very very slow. I tried 2.8.4. Also slow. (On the plus-side, the Wacom bugs are totally gone.)
I tried a couple of different binary builds. The two linked from the Gimp homepage and one from Partha.com. All very slow. At print resolutions, even something as simple as changing a layer visibility (Previously almost instant) now takes the better part of a minute.
Did something horrible happen to the rendering code during the X11 migration?
I've tried
--Turning off all color management.
--Working on monochrome files. (No improvement, which makes me think it must be draw-related.)
-- Increasing and decreasing the tile-cache size.
--Cursing.
So far I've just been using pre-made binaries, but I'm not adverse to compiling my own if I absolutely have to.
Rolling back to 2.8.0 fixes the performance problem, but I'd really like to have the bug fixes.
how to install the UFRAW plugin for the Mac native version of GIMP (2.8.2).
I have searched, but everything I find says that UFRAW is included with Mac builds of GIMP. This seems to be true for versions that run under X11, but not for the native build.
I have a 900x900 px image, and a 900x900 px artboard.
When I place the image on the artboard, the image is 675.094x675.094 px
How can I place the image at its native size?
Windows 7 | CS5
I have a dwg that someone imported and I cannot find where this object is. I have tried searching the database with DBLink, Ideate BIMLink and I have gone into every view to no avail. I also used the reviTTools add-in which says there are no drawings in the file. Am I dealing with a corrupted file? I am super OCD and this is in our Template which makes it an even bigger problem.
View 2 Replies View RelatedThis entire upgrade sucks! Took me forever to figure out how to get my catalog from 3.0 imported. Now I am missing plug ins, user presets in develop module, paper pre-sets in printer module. Why isn't everything imported? Why aren't all default settings imported? Why do I need to set up the layout etc. again. Horrible upgrade! I was on line with Adobe tech support. They say they know the problem, try back in a few days! I spent $79 to upgrade andthe product doesn't work!
View 19 Replies View RelatedI have LR loaded on my MacBook Pro and everything was alright in terms of LR operation. I use a 5D MKII camera and always shoot in RAW (CR2). I always download images from the Card to the HDD and then import it to LR. However, CR2 Raw files are not getting imported and I am getting the following error message - "The files appear to be unsupported or damaged".
I can still import other files like .tiff and .jpg files.
I am using Lr 4.3 and want to import vacation photos. Lr says they have already been imported but I can't find them even if I search by photo name using Explorer. Should I just uncheck the box not to import suggested duplicates and import again? I have over 4,000 and don't want them on the hard drive twice.
View 3 Replies View RelatedIs there a way to easily "retrieve" solid model features and sketches from a stp file imported into Inventor Pro 2012 without having to recreate them?
View 2 Replies View RelatedHow to configure autocad 2008 to treat the .SHX fonts as "text" and not as "graphics" when plotting in PDF?
Using the plotter configuration editor, you can treat True Type fonts as "text" or "graphics". How about .shx fonts? My goal is to plot drawings (containing .shx fonts) in PDF whose text are content readable.