i was not aloud to buy Lightroom5 as of "some errors" in my personal data: i supppose my card issied in RUssia, and address I indicated was my US office place. How to change the country in my profail to Russia now?
View 1 RepliesHow can I change the country in my profile? It mentions BY instead of Belgium. I probably made an error during registering.
View 2 Replies View RelatedHow can i change country?
View 1 Replies View RelatedI would like to change address and country for receiving invoices.How can I change it?I have avaliable now only Poland as a destination country, but I live now in Norway.
View 1 Replies View Related1. If you import an image with GPS data, Lightroom 4 will add appropriate values for Sublocation, City, State/Province, Country and Country Code. Is there a way to add this data to existing files while retaining history?
You can write metadata to files ([Ctrl][S]), remove those files from Lightroom and then synch folder to reimport them. That reimports them with all modified settings but without their history.
2. Is a google map link available for a GPS location of a photograph?
In Lightroom 3, you could click on the GPS location and that took you to a Google map page with a specific web link that you could then publish, eg on a blog. You can copy and paste the GPS location into a Google map page but that does not give you a web link you can use.
3. Is there a way of publishing a map?
Is there (or will there be) any way of exporting a map page, say as a jpeg?Is it OK to take a screen dump of a map page and publish it, eg in a blog?
My workflow includes renaming images based on capture date and country ISO code in 3 letter format. (see: http:[url].....
When importing files with geodata my "country" metadata is filled in 2 letter format. Is trere a way to chenge this in Lightroom 5? I would like to avoid renaming my old files.
In metadata, how do I delete a previously misspelled country name from auto-completing? I am using Lightroom 3.6.
View 4 Replies View RelatedI'm running LR 3.6 on Win7. I have a dual monitor setup with a Samsung 2443 and a Dell E6400 laptop screen.
My problem is that the color profile used by the monitor is way too mangenta on the Samsung monitor. Every image is tinted very mangenta when shown on the Samsung. If I drag the image over to the laptop screen, the color balance are normal. If I drag the entire LR window over to the laptop screen, the color balance of the images changes when the window is released.
How can I change this? (I have no access to a screen calibrator at the moment.) I think its the ICC profile for the Samsung which is wrong, as the same happens if I open images in other picture viewers. Except windows GUI itself has nice, white, crisp colors. If using the monitors on say Mac, they are also fine.
In Development module in LR4.4, viewing a Fuji X100s raw file (converted on import to DNG) I tick the box for "Enable Profile Corrections" under "Lens Corrections," and select "Auto" from the "Setup" menu. I would have thought that LR would pick up the X100s profile, but no, nothing happens. If I choose "Fujifilm" from the "Make" dropdown, I can find the X100 (not X100s) profile manually. The profile's probably pretty similar, but still, I'm wondering why my install of 4.4 doesn't have the X100s profile in place?
While I'm at it, I'll ask this too -- I recently bought the new Nikkor 35mm 1.8G ED (the new full frame 35mm Nikon lens, not the trusty 35mm 1.8DX) and there's no profile for that lens in my LR4.4 either.
Finally, I note that when I choose "Check for Updates" from the "Help" menu in LR, I'm told there are no updates available.
I just bought the Tamron SP 90 2.8 DI MACRO USD and LR lens profiles only lists this lens for Canon (F004E) and Nikon (F004N). There is no profile for Sony (F004S) ! Any drawback if I use F004E or N ? Or better use a the profile of the older Model of that lens where there is a Sony profile ?
View 7 Replies View RelatedDownloaded the BLURB color profile and installed to the system. Restarted LR and it did not appear in the other list for color profiles. I checked and found the profile in c:/Windows/System32/spool/drivers/color. I tried coping the file to c:/ProgramFile(x86)/CommonFiles/Adobe/Color/Profiles/Recommended. Restarted LR and still no BRURB icc shows up in the list. I also noticed there were other profiles in these directories which do not show up in the list. What am I doing wrong? Is there another menu which controls the "other..." list?
View 3 Replies View RelatedI have Ai CS5, and I was wondering how can I use fill for a country without creating polygons.
For example I have a map in Ai and then I outline it in pen. Now how can I fill each state without having to trace each individual state in pen..because when I do this the state lines overlap and look bad. Like if I trace Washington and Oregon, the borders overlap unless I just trace the border line once in pen...but then I cannot fill the states because they are not separate polygons but a continuous line.How can I fill the states if they are not selectable polygons??
Or how can I make the states selectable polygons without having the borders overlap and look messy?
I created a template using ANZ as the base template. Now I have a requirement to change the country kit to UK. What all the things I need to change in the template to use the UK country kit.
Also when users using my template on a machine which don't have ANZ country kit installed, they getting error messages such as missing SHP files, Payload item not found.
How to fix these issue also what is the correct procedure when giving using Civil3D template who are using different country kit.
I am trying to change the profile of my top handrail but i only get W beam in the pull down box. i have inserted both 1" pipe and 1" plate into my drawing and it still want show up.
View 1 Replies View Relatedhow do I change the precision for the elevation?
View 3 Replies View RelatedIs there a way to change the order of the Profile Hatch after it's been done as later solid hatches are displaying over the earlier ones?
The only way I've been able to do this is to delete all and then create in the correct order which is a bit of a PITA.
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
I am using Autocad MEP 2010 and after a new installation when attemp to change default profile to my custom profile, I am facing ;
"FATAL ERROR: Unhandled Access Violation Reading 0x0000 Exception at e8d6a110h"
I have even tried to uninstall and reinstall the software as described in following forum ; URL....
So I am trying to edit certain text features dealing with stationing in one profile view (for example I don't want any stationing on the top of the profile view). How do I do this so it will just affect the noted profile view and not delete the stationing on all of my profile views in this drawing.
View 4 Replies View RelatedOne of my Illustrator CS6 documents was intially created some time ago without paying much attention to colour management issues. I am now trying to put that right and have assigned the document a profile of Adobe RGB (i998). However, each time I open it I am warned that 'The document has an embedded color profile that does not match the current RGB working space'. It also says that the embedded profile is sRGB, while my working space is Adobe RGB. I get this message three times and am assuming that it refers to embedded objects.
Do I have to reimport all items that may have a colour profile, having first ensured that they are tagged as AdobeRGB?
I've looked and looked, and even Googled. how to change the default color profile when you start a New image file? In CS5 mine defaults to sRGB (Under the Advanced drop down) but my CS6 is ProPhoto RGB which means I have to change it manually nearly every time I paste an image copied via right click in a web browser.
View 8 Replies View RelatedI've attached two screenshots of my issue. I simply need to change my major station from 1000' interval to 500' interval. As you can see from the screen caps, I can manage to get the band details on the stations I want, through a workaround, but the vertical gridlines get all messed up.
Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3
I have a profile that references an alignment, I want to change the alignment that the profile view references, can this be done?
View 1 Replies View RelatedWhen I first install My autocad Map 3D 2012 my workspace name are Planning and Analysis, 2D Drafting Workspace or Map Classic Workspace after I select reset button in option->Profiles tab My Workspace names are Drafting & Annotation, 3D Basic, 3d Modeling or AutoCAD classic. How do I get my profile to reset back Autocad Map 3d 2012?
View 1 Replies View RelatedIs there a way for the program to automatically change profile elevations of intersecting roads.
Say for example i have two intersecting roads ROAD A and ROAD B.
On my ROAD A profile at station 0+300 i have a proposed road elevation of 9.5
On my ROAD B profile at station 0+000 (intersecting point) I have the same proposed road elevation of 9.5.
Now i change my ROAD A profile at station 0+300 to 10.3
Is there anyway to allow the program to automatically change my ROAD B profile elevations to 10.3
IF NOT--
and I have to use the Annotate > Add Labels > Profile View > .......................... labels,
Is there a way for those labels to link across the profiles such that , On my ROAD A profile at station 0+300 i put the label at the elevation of 9.5
On my ROAD B profile at station 0+000 (intersecting point) I have the same label at the elevation of 9.5
Now i change my ROAD A profile at station 0+300 to elevation of 10.3 then is there a way for it to automatically raise the ROAD B elevation label
So that I would know, without having to manually check through, that there is a discrepancy between those intersecting roads. So the real list of my query is whether I can link my alignments, profiles or annotation labels.
I'm trying to fix my profile via lisp-registry key. Why? Because the profile we use is part of a plug-in meaning we can do it using our profile so I alternatively the answer is to tweak the one supplied as part of the plug in.
The method I’m familiar with is to edit using the following code as example;
(vl-registry-write "HKEY_CLASSES_ROOT\.PEN\Shell\open\command" "" "notepad.exe %1")
However that’s for creating a new registry key entry the one I have already exists but needs to be modified, better yet the profiles name (*.arg file) can change with updates, so in my search I came across the following link.
[URL]
Now I cant put it together and am not sure where I have gone wrong…(See code bellow)
(vl-registry-write "hkcu "\Profiles\" (getvar 'cprofile) "\General\DefaultConfig" "\\DCMAR02\A03P20")
Is there any way to change a Profile Type that has "File" assigned to it to"Layout"?
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
Is there a way to change the settings on the Profile Layout Parameters to display as Gradients instead of the default Slopes?
E.g. I'd like to type in 1 in 150 instead of 0.6666666% etc
Inventor creates a names to custom library parts based on settings and available parameters.
For all custom libraries I can create file names as I want except profile libraries.
The profile library create file name using Family Name + Stock Number and I did not find the
way to change it. I cannot get rid of that Stock Number in family name in this and other profile libraries. I wish I can use Part Number instead of Stock number in naming as more informative.
To change the file naming I do the following:
Manage - Editor - chose Library - chose family - Family Table - File Naming -
than chose required parameters to be shown as file name (for instance I have
{PARTNUMBER}), than in Map to Inventor Property: - Member.Display.Name
than OK - Refresh - Done.
All custom libraries obeys the file name changing EXCEPT the profile library.
[URL]
in civil 3d 2013 i have a existing surface, alignment, and profile that is data linked into another drawing when i create a profile view from the profile data link when i get to the profile display options under update mode it shows as beening static, i don't want it to be static i want it to be dynamic. is there a way or setting that will let me change that to static? we show the existing grade as hidden but with the static option set the grade shows up with long and short.
View 5 Replies View RelatedI want to change my elevations color to green and the other one to yelow. I can't not find this option. I using 3D 2011.
View 1 Replies View RelatedHow to set change the radius to degrees in horizontal geometry band set profile.
View 2 Replies View Related