How do I to change some of the information in a custom metadata preset which I already created for in the "Applying During Import" window. If the preset can/t be modified, is there a way to simply remove it and make another one. Also, how to enlarge or reduce the size of lightroom on my monitor?
View 1 RepliesI want to wash my .jpg files through LR 5 in order to display the filenames. Via the Slideshow module I have been able to select and direct the displaying of the desired metadata option. When I export the files the displayed metadata information does not make the trip.
View 7 Replies View RelatedI am in the book module and trying to use the "auto layout preset editor"......when I go to save any custom preset it does not save and the preset area remains blank. I only have the four presets that came with lightroom and cannot create my own.
I am using LR 4.1 on Mac OS 10.8 mountain lion..
I am a AutoCad drafter for telecommunications and I have utility pole points (long/lats)
I can insert the poles via long/lat and all is great, my issue is I would like more information in those points.
For example, pole number, class, HOA, Make Ready. Currently I create a survey data store and import ASCII Points using PNE(comma delimited)
So with my Excel file (this is where I get my pole information from) I get a point/northing/easting to enter into the formatting section.
I would like to add more information to these individual points, like ploe number, class, HOA...
If I view the point table I see that there are a lot of other columns, can I use them or customize them? is there a quick tutorial on this issue?
Operating system is Windows 7. LR 4.3 installed.
View 8 Replies View RelatedIn the Library module, to the left of the "Metadata" label next to the twisty to open it up, is a drop down list that starts with "Default" and then has a list with sets such as "DNG", "EXIF", etc.
Two questions or requests:
1) I want to be able to see ALLLLLLLL of the metadata. Right now I got out to ExifTool and suck out the data I need and hand corrolate that. In last night's particular need, I needed the rotation of the camera body which is in the metadata (twice) but I don't know how to view it from inside Lightroom.
2) I want to be able to add to the list I described with my own sets of metadata fields. To me, this would be very nice. There are tons and tons of fields but I'm interested in only a few but I'm sure each person is interested in a different set. It would be nice to be able to customize which fields are displayed. Of course, once you go that far, then you may as well add the ability to name the sets and save them for later use.
Is either one of these items possible in Lightroom 4? (or 5?)
Exporting a new round of images to my rebuilt photo website this week, and very glad that LR can generate year-specific copyright tags, which are infinitely less cumbersome than my previous tactic of trying to pull copyright metadata from images at the site level.
So far, I'm preferring the watermark layout size consistency of Lightroom's default watermark system over results from the otherwise excellent and flexible LRMogrify2 plugin.
I'd like to either leverage a token to use copyright metadata within custom watermarks or find out how to reposition/restyle the default Simple Copyright Watermark, eg have the Simple Copyright Watermark show up in a font other than Myriad in a different position on my images...
Hope this isn't too obscure or poorly-articulated a first question in these forums.
(Running Lightroom 4.3 on Mac OS 10.75).
l has a tool allowing address of the default fonts for watermarks and other presentation variables in a sideways way through translation settings. It's a strong start, but other fonts are looking even more shoddily rendered by this method. Back to fidding with size and ratio options in LRMogrify2.
Is there a way I can save a custom crop preset to apply to images on import on Lr3.5?
View 4 Replies View RelatedI just imported several photos into my catalog using a preset metadata import. After Import I edited all the photos and then was set to export. Unfortunately it was the wrong metadata preset and I want to change it on all my photos. Is there a way that I havent been able to find yet that would allow me to easily change over the metadata copyright info on all the photos without having to start all over again?
View 2 Replies View RelatedI am changing computers, how I can move the development info with my master files?
View 1 Replies View RelatedI used Lightroom SDK to create a plugin generating custom set of Metadata (for LR5) to manage images as produced items (printed and framed photos). In order to be able to create usefull lists of items, I would need to be able to print this metadata fields on contact Sheets.This is the only functionality that prevents me from using Lightroom as a database for produced artworks, beeing able to manage exhibitions, stock locations, sales etc...Guess this means I have to make those new fields accessible in the Text Template Editor that allows user to compose an aggregated text from various type of metadata for printing or slideshows.But seems that only the original sets of metadata appears in Text Template Editor, not the one created by my plugin.Is there a way to add this functionnality to my plugin ?
View 9 Replies View RelatedA friend asked me how to create a base template for metadata information (file/info/description). The basic info is my name, address, copywrite, etc. I had created this on a previous version of Photoshop and was able to migrate it to PS6. However, in trying to answer his question, I have lost my own template. How to recreate this.
View 2 Replies View RelatedWhy is there a 'lightroom video preset' under the preset tabs. yet when i open a video file in lightroom and go to the develop modue it says video is not supported in the develop module?
View 2 Replies View RelatedAs far as I can tell, Copy Metadata and Synchonize Metadata do the same thing. Is there a difference in what they do?
View 1 Replies View Relatedhow to change the numbers to the brush name in the brush preset picker?
When you hover over a brush in the picker you get the name of the brush. I think it would work better if the numbers were replaced with the name of the brush.
I've argued this repeatedly with the powers that be at my small company and they're set on some old methods that I'm trying to figure out how to make happen.
We often have weldments where we do an assembled view on page 1 and balloon it and have a parts list. Pages 2-4 will be the details of the welded parts. On page 1, I bring in the "Title" and "Subject" fields from the assembly iProperties.
Here's the tricky part. On pages 2+, I don't want to bring in those two fields, I want to bring in something different. Is it possible to differentiate like that?
Second part of the question: is there a way to pull the balloon item number from page 1 into a field somewhere on following pages? For example: page 3 may show the details for "item 2". Can I bring the value of that balloon (item 2) into page 3 somehow?
I've been using Corel Draw! 8 for years and my favorite tool was the angle of rotation. For example, I would select an object, usually a rectangle that has the point of rotation at end of the narrow rectangle. As I rotated it, I could see how much the angle of rotation in degrees is. Therefore I could type a value in the box and the rectangle would rotate some many degrees. Fast forward to my Corel Draw 12. Now when I click on the same object, the box will display what the angle is in degrees already based on the circular angle startingaat the nine o'clock position. I need it to say ZERO and I can't find the setting to set it at zero
what I am drawing is I rotate a narrow rectange and basically creating a dial face for instruments.
I'm teaching myself 3D from a textbook. The text gives an example of how to create a UCS that is located on a 3D example part from the CD that came with the book; this is done using the UCS command. It also shows how to use the viewport presets. I was able to move the UCS as needed around the part, I was able to use the viewport presets to look at the part from different sizes, but if I created a UCS and then used the preset views, the new UCS I created did not stay oriented, but instead appeared to default to the origin. But when I rotated the part with the mouse without using viewport presets, the UCS stayed put.
View 2 Replies View Related- I open a .jpg file in PS CS5,
- I change one or several metadata, using the XMP embedded panel (File -> Information)
- I apply the changes,
- I close the file.
At this moment, PS ask me if I want to save the changes. Again... A little bit curious, because I already did it, but... I agree. Then, PS ask me now to choice the jpg quality (you know, the scale from 1 to 12). But changing metadata never affect the image itself... So, it should be useless to do that (of course, I made no modification on the picture itself).
I must say that (if I remember well) sometimes I was able to close the file directly.
I wonder whether it is possible to add custom attirbutes to AutoCAD Documents. Like, when adding new key-value pairs to the OS registry. I see this as a function that can add a pair "attribute" => "value" to the Document's database (or another saveable component) and later pull the "value" back by passing the "attribute" to another function.
View 2 Replies View RelatedI am using some custom property set definitions to add information to spaces. However as I insert spaces I find that I have to go to the extra step to add the property set to the object using the Extended Data tab in the Properties Palette.
It is not a huge deal but sometimes it is forgotten and schedules are not reporting properly, or the display theme is not correct. Although there are tools to quickly add them I would like to know if there is an automatic way to add them while creating the spaces/zones.
On a related note. There is a property set definition that is in each file by default called RoomFinishObjects. Is there a way to purge this? I don't want to attach finishes to my objects. But it seems to be embedded in the file.
I modified the "Prepress" pdf preset to show crop marks and saved this pdf preset as "Cropmarks". However when I use the "Collect for Output" wizard, the new pdf preset (i.e. "Cropmarks") does not show up as an option in the dropdown.
Is there a way to make it available/show up in the "Collect for Output" wizard?
I recently had to reload PSE9 on my Vista 64-bit machine after a motherboard/hard drive failure (yes, supposedly both components failed). I edited a few images tonight and noticed that the time-stamp metadata on the imported images does not match the metadata on the originals--everything is an hour off. I made the original purchase of the product a few years ago and it was fixed by a later update. If it matters, the images are RAW format images and I was using the full edit functions of the software.
View 1 Replies View RelatedWe use C3D 2012 (metric only) - We are attempting to customize our list of structures for Sanitary Sewers. The structure list shows sizes we do not use and we would like to modify them. However, when we try to select the "Inner Diameter" it displays a list of sizes that we can not seem to modify or add to.
I have looked at some of the XML files to try and modify or add new sizes (example: AeccStructConcentricCylinder_Metric.xml) , but they do not seem to be recognized even after I restart the program.
Here is what the file looks like:
<ColumnConstList desc="Inner Structure Diameter" dataType="float" unit="mm" name="SID" id="CCL1" visible="1" context="StructInnerDiameter" index="0">
<Item id="i0">1200.0000</Item>
<Item id="i1">1350.0000</Item>
<Item id="i2">1500.0000</Item>
<Item id="i3">1800.0000</Item>
<Item id="i4">2050.0000</Item>
<Item id="i5">2300.0000</Item>
<Item id="i6">2550.0000</Item>
I tried modifying the last line replacing 2550 with 3600.
I also tried adding a line <Item id="i7">3600.0000</Item>
I saved the XML file and restarted the program with nothing changing that I can see.
Looking for correct file(s) to edit so I can modify the LISTS that come up in the piping modules.
I can't seem to figure out how to change a custom shape. Shape: 35px H x 700px W rectangle with vertical gradient. What I want to do: I am wanting to reshape the left 100 or so pixels so that the left side curls up and comes to a point approx 50px above. Best way to describe would be the shape would look like a candy cane laid on its side.
NOTE: I don't have a problem creating the shape. I have a problem with getting the gradient to follow through with the shape - the gradient wants to change according to the heigth of the curl. So far the only "attempted" way was using the liquify feature but I can never draw a good circular shape by hand.
I recently learned using presets in LR. I currently use LR5.2.
I recently installed a few third-party presets to LR.
I am very happy with the performance of these presets.
Here is a problem: I have many LR catalogs.
Is there a way to install all presets to catalog whenever I create new one (just like a default preset) and also to old catalogs?
how do you create a preset in LR 3.6 to be used in the develop module?
View 1 Replies View RelatedI currently use LR5.2. In camera calibration panel, there are a few options for camera profiles, e'g., camera landscape. I created a "camera landscape" preset, which did not work. It seems that there are some missing checks in "new develop preset" box. As seen in the attachment, i placed checkmarks only in front of "process version" and "calbiration". This was not enough. It seems that the box might need more checkmarks to produce a workable landscape preset.
View 13 Replies View RelatedI am trying to find my way, of how to submit my photos to the external lab for printing. Print module is kind of useless for me - the page setup is printer driver dependant and none of my installed printer drivers allows me to define borderless print and so LR does not allow me to set margins to zero. I think, that such desing limitation is pretty strange, especially if you just want to print to the jpeg file.
So - then I moved on to the crop tool. What a bunch of inconsistencies and design limits:
- LR seems to use some kind of catalog dependant storage, instead of just some for e.g. custom XML or other kind of list
- LR mysteriosly remember your last 5 settings. If you do a mistake, you need to reenter all of them again
- you can't even name your custom ratio settings - that's imo pretty much insufficient
- I need to set precious ratio setting for the Noritsu machine, so that I get exact resolution. Good for two of my settings, but when I try for my 13x18cm (2268 x 1625 pix), LR deletes my custom setting and marks 5x7 for me. But it is off by 10 pixels on one axis! Some strange rounding and matching was applied, but I can't it set exactly to what I need. Why does LR mess with what I want, if I select custom ratio?!
So I thought, that I might make a preset. I noticed, that when you copy setting from an image, there is a crop section. But - exactly the same dialog, which allows us to save settings, does miss a crop section. What a bummer! I found xy requests, where ppl were asking for the functionality few years ago. I am very negatively surprised, that it was yet not granted for implementation, especially as some of crop tool facilities are pretty arcane at best.
What I am now thinking about is to prepare three model images, make separate folder for them, and use them as a source for the cropping setting to copy from, but of course I would like the crop functionality to be enhanced/fixed.
Is there any way to stack preset filters on photos?
I remember back in Lightroom 3, you could select some filters, like Cold Tone, then select another filter and would apply itself on top of the Cold Tone filter.
Now, it seems in Lightroom 4, every time you select a filter, it completely overwrites all the settings of previous ones.
I have imported a preset and want to use it on several photos in the same folder. How do I do this? I cant seem to see the option when I try to sync them.
View 9 Replies View Related