I am in the book module and trying to use the "auto layout preset editor"......when I go to save any custom preset it does not save and the preset area remains blank. I only have the four presets that came with lightroom and cannot create my own.
I am using LR 4.1 on Mac OS 10.8 mountain lion..
I have to process about close to 400 pictures every weekend which takes a lot of time when doing levels and everything on every individual picture.
I need to create a preset that will do just that on 400 pictures but will make adjustments based on each individual picture's needs. I have tried to work on 1 picture while have the rest selected and Auto Sync selected. But what it does then is to apply the same values on all selected pictures and not "auto" for every individual picture.
So as soon as I import my files it automatically applies one of my presets and I have to manually undo them. I don't remember ever setting this up.
View 1 Replies View RelatedIn Lightroom 4.3 I have saved several of my own Auto Layout presets in the Book Module.I want to delete some of them. How do I do this?
View 2 Replies View RelatedHow do I to change some of the information in a custom metadata preset which I already created for in the "Applying During Import" window. If the preset can/t be modified, is there a way to simply remove it and make another one. Also, how to enlarge or reduce the size of lightroom on my monitor?
View 1 Replies View RelatedOperating system is Windows 7. LR 4.3 installed.
View 8 Replies View RelatedHow can the modification time be added to the label that appears when the cursor hovers over an image?
I am a newbie and have images stored in the Light Room Catalog, in other folders, and in both. When an image is editing and saved in Photoshop, I do not know which image has been updated. The modification time in the label would allow me to know.
Auto Layout Preset Panel. I have been unable to locate it.
Is there a way I can save a custom crop preset to apply to images on import on Lr3.5?
View 4 Replies View RelatedUsing LR 5.
I'm trying to create a simple 6 image per page book using Auto Layout. No matter what I try, I cannot get it to lay the images out in sequential order.
The images are numbered 001_XXXX.jpg and I see them in the correct order in the LR Library.
I purchased Lightroom 3 and installed it via a CD on a PC running Windows 7. I've experienced two problems with the Print Module. The folder for Lightroom print templates is empty. Also, when trying to set up a custom layout, I cannot click-and-drag photos from the filmstrip to the layout. I have tried re-installing Lightoom, but the problems still persist.
View 2 Replies View RelatedI'd like to create a totally custom page, inserting photos at various locations and sizes as well as text regions. Can this be done? I haven't been able to find a way to do this.
View 6 Replies View RelatedWhy is there a 'lightroom video preset' under the preset tabs. yet when i open a video file in lightroom and go to the develop modue it says video is not supported in the develop module?
View 2 Replies View RelatedI modified the "Prepress" pdf preset to show crop marks and saved this pdf preset as "Cropmarks". However when I use the "Collect for Output" wizard, the new pdf preset (i.e. "Cropmarks") does not show up as an option in the dropdown.
Is there a way to make it available/show up in the "Collect for Output" wizard?
Yes, I'm probably the only person on the planet that wants this, but I liked how the Auto Tone auto adjusted the Exposure slider (ONLY!) and left all the other sliders at zero in the Lightroom 4 beta.
Is there a way to write a preset that returns that behavior?
We are experimenting with turning on the auto publish to PDF on prompted save. (Options/Plot and Publish tab) This will be a very nice tool since we create PDF's of every dwg. that we create. However, I am having trouble locating the settings that control the page layout in this feature (The titleblock is not centered and is getting cut off when PDF is generated) but, When I preview the "standard" way of plotting to PDF, the drawing is fine. I assumed the settings would be one in the same?
View 3 Replies View RelatedI am using AutoCAD 2011.
I want to add a few new scales in layout. The new scales are: 4"=1'-0" up to 5-3/4"=1'-0" in 1/4" increments. Unfortunately when I add the scales in scale list edit while I'm in Layout, my drawing doesn't scale to any of the new scales.
I'm trying to create a macro which will attach a custom sketched symbol with a leader to some specific parts in a view. By modifying some sample code I managed to create a macro which will attach the sketched symbol to the currently selected edge (see code below). However I would like to select the view and let the code cycle trough all the parts and check the filename or a custom iProperty. If the filename has a certain pattern or a specific custom iProperty exists it should add the sketched symbol. I don't really see how I should do this, I can get a reference to the selected view and as far as I can see I can use the referencedfiledescripter to open the assembly and cycle through the occurences. However I don't see how I can use this to add the sketched symbol to the occurence in the drawing view.
' Set a reference to the drawing document. ' This assumes a drawing document is active. Dim oDrawDoc As DrawingDocument Set oDrawDoc = ThisApplication.ActiveDocument ' Set a reference to the active sheet. Dim oActiveSheet As Sheet Set oActiveSheet = oDrawDoc.ActiveSheet ' Set a reference to the drawing curve segment. ' This assumes that a drwaing curve is selected.
[Code] ......
I have a utilities file with existing water and FM as shown in picture 1. But when I reference it into my sheet, the text becomes very tiny. Is there a setting for paper space I should change? The dash is correct, just the letters get small, so changing the ltscale in the original drawing blows up the dash also so that won't work.
Windows 7 x 64
Nvidia GeForce GTS 450
8 GB Ram
Intel Core i5-2310 @ 2.90 GHz
v. F.107.0.0 AutoCAD Civil 3D 2012 SP1
I have created the Custom library of ISO bolts by adding the Material to existing ISO library using the Material Guide.
The goal is to make bolts black and anodized to be more specific with purchase orders from very beginning.
After the adding the material everything is working good except the auto drop. There is a wide Table pop ups with a lot of unnecessary info.
Is it possible to choose the columns to represent there? I mean leave just Material or Part Number ?
[URL] ........
I've tried doing a block that automatically updates the X and Y coordinates from its moveable leader. I can get it to work in model space or paper space. But my problem is I want it to work in PS, but update with the MS coordinates through the viewport.
I can get it to update, by LISP, by picking a point and passing the points to the blocks attributes. At the moment I have a LISP when actioned it locks the viewports, activates the viewport, and asks you to select a point. Once selected it de-activates the viewport (going back into layout tab) then asks which block you want to update. Where you now select the block and it updates the coordinates. I.e. manually pick the point in MS, switch to PS and then manually pick the block. Then I have to manually modify the leader to the correct location.
I'm hoping that I can (In PS) move the end of the leader to snap to a position in MS and the coord updates to reflect the correct MS coordinates. I'm thinking that maybe this can't be done automatically and that I maybe can move the leader but I'm not sure how I can do it without running a LISP to update the block?
I'd be happy moving the leader then just running a single command and the leader coordinates updating without having to select the points and the block again.
I've attached the block showing the auto update of the attributes (fields).
I recently learned using presets in LR. I currently use LR5.2.
I recently installed a few third-party presets to LR.
I am very happy with the performance of these presets.
Here is a problem: I have many LR catalogs.
Is there a way to install all presets to catalog whenever I create new one (just like a default preset) and also to old catalogs?
how do you create a preset in LR 3.6 to be used in the develop module?
View 1 Replies View RelatedI currently use LR5.2. In camera calibration panel, there are a few options for camera profiles, e'g., camera landscape. I created a "camera landscape" preset, which did not work. It seems that there are some missing checks in "new develop preset" box. As seen in the attachment, i placed checkmarks only in front of "process version" and "calbiration". This was not enough. It seems that the box might need more checkmarks to produce a workable landscape preset.
View 13 Replies View RelatedI am trying to find my way, of how to submit my photos to the external lab for printing. Print module is kind of useless for me - the page setup is printer driver dependant and none of my installed printer drivers allows me to define borderless print and so LR does not allow me to set margins to zero. I think, that such desing limitation is pretty strange, especially if you just want to print to the jpeg file.
So - then I moved on to the crop tool. What a bunch of inconsistencies and design limits:
- LR seems to use some kind of catalog dependant storage, instead of just some for e.g. custom XML or other kind of list
- LR mysteriosly remember your last 5 settings. If you do a mistake, you need to reenter all of them again
- you can't even name your custom ratio settings - that's imo pretty much insufficient
- I need to set precious ratio setting for the Noritsu machine, so that I get exact resolution. Good for two of my settings, but when I try for my 13x18cm (2268 x 1625 pix), LR deletes my custom setting and marks 5x7 for me. But it is off by 10 pixels on one axis! Some strange rounding and matching was applied, but I can't it set exactly to what I need. Why does LR mess with what I want, if I select custom ratio?!
So I thought, that I might make a preset. I noticed, that when you copy setting from an image, there is a crop section. But - exactly the same dialog, which allows us to save settings, does miss a crop section. What a bummer! I found xy requests, where ppl were asking for the functionality few years ago. I am very negatively surprised, that it was yet not granted for implementation, especially as some of crop tool facilities are pretty arcane at best.
What I am now thinking about is to prepare three model images, make separate folder for them, and use them as a source for the cropping setting to copy from, but of course I would like the crop functionality to be enhanced/fixed.
Is there any way to stack preset filters on photos?
I remember back in Lightroom 3, you could select some filters, like Cold Tone, then select another filter and would apply itself on top of the Cold Tone filter.
Now, it seems in Lightroom 4, every time you select a filter, it completely overwrites all the settings of previous ones.
I have imported a preset and want to use it on several photos in the same folder. How do I do this? I cant seem to see the option when I try to sync them.
View 9 Replies View RelatedI want to edit an export preset and in this example I want to remove the check mark to "Add to This Catalog". How do I "save" this change to that preset?
View 3 Replies View RelatedI just finished editing 300 photos and im not sure how but selected apply all on a preset to all my photos, I try hitting cancel and undo but it wont stop changing all my weeks worth of editing.
View 2 Replies View RelatedI'm on Lightroom 4.3
OSX 10.6.8
When ever I make a photo adjustment and want to save it as a preset all the check mark boxes aren't there I have to manually check the boxes I want saved. I have the adjustment switch on when I click new preset. It use to have the adjustments I've made already checked. This is for my friend. When I use lightroom and save a preset the check mark boxes are there.
In Lightroom 4 we could create custom video presets for slideshows [URL] ..... But when I try to use the presets in Lightroom 5 they do not show up (even though on the dialogue box for exporting a slideshow they are still called video presets).
how to write a custom slideshow video preset for Lightroom 5?
I have photoshop cs4 and I cannot find the Auto smart fix, auto levels, and auto contrast nor the adjustment for each that I had with photoshop elements.
View 10 Replies View Related