How can the modification time be added to the label that appears when the cursor hovers over an image?
I am a newbie and have images stored in the Light Room Catalog, in other folders, and in both. When an image is editing and saved in Photoshop, I do not know which image has been updated. The modification time in the label would allow me to know.
Auto Layout Preset Panel. I have been unable to locate it.
I am in the book module and trying to use the "auto layout preset editor"......when I go to save any custom preset it does not save and the preset area remains blank. I only have the four presets that came with lightroom and cannot create my own.
I am using LR 4.1 on Mac OS 10.8 mountain lion..
Using LR 5.
I'm trying to create a simple 6 image per page book using Auto Layout. No matter what I try, I cannot get it to lay the images out in sequential order.
The images are numbered 001_XXXX.jpg and I see them in the correct order in the LR Library.
Yes, I'm probably the only person on the planet that wants this, but I liked how the Auto Tone auto adjusted the Exposure slider (ONLY!) and left all the other sliders at zero in the Lightroom 4 beta.
Is there a way to write a preset that returns that behavior?
We are experimenting with turning on the auto publish to PDF on prompted save. (Options/Plot and Publish tab) This will be a very nice tool since we create PDF's of every dwg. that we create. However, I am having trouble locating the settings that control the page layout in this feature (The titleblock is not centered and is getting cut off when PDF is generated) but, When I preview the "standard" way of plotting to PDF, the drawing is fine. I assumed the settings would be one in the same?
View 3 Replies View RelatedI would like to take my many photos and videos and be able to batch edit a folder's worth at a time after they have been added to my timeline. I have several that have the same lighting problems and that would save me allot of time.
View 1 Replies View RelatedIs there a way to edit the point descriptions in the drawing and update my auto line work to match it. I can edit the point description fine, but my auto line work will not update?
View 3 Replies View RelatedI want to know if there is a way to edit the Face Robot layout? The buttons in the Face Robot panel to the right of the screen are too large. They don't all fit on screen. Is there a way to shrink the buttons so they all fit?
View 1 Replies View RelatedI'm trying to simply edit the default viewport in a layout that I've created. I can't seem to find any threads that were successful or answered about this. I need to set the scale, size and linetype of the viewport. When I've tried, the viewport has simply not changed. I'm afraid im not getting the current viewport. Im using ed.activeviewportid hoping that its associated with the current layout as specified by layoutmanager???
View 2 Replies View Relatedfont mystery.cdr
Customer sent a file (.ai) from Adobe Illus. and all the text has been converted to curves, and I need to edit the text on the layout.
What would be the best way to edit a pipe network's layout (pipe position, pipe slope, structure height, etc.)?
The easiest way I can think of is to create alignments of all the pipes in the network and then editing the grips in the profile view of each alignment, easily changing the pipe's slope and depth...
The catch with this method is that:
- it takes a while to create all the alignments needed;
- I have to manually adjust the alignments if I need to change the pipe network position on plan.
Using Building Design Suite Ultimate 2014
We have an intern that has somehow made it impossible for her to edit inside viewports(switching to model space) on her layouts. None of us has seen this before and do not know how to reverse what she has done. This happens with any drawing she opens. She can edit when in the model space tab, but when she goes to one of the layout tabs and double clicks on the viewport she cannot edit. The viewports are not locked.
We have had several people look at it and cannot find what command or setting she changed. She does not have admin rights so I do not think she could have run a script. She is not familiar with AutoCAD Architecture, her experience has been limited to Revit.
I am having trouble trying to change the View Scale in the the layout tab. Someone before me changed it to be 1:0.808 and now when i print my drawings they are all smaller than what is shown on the screen. how do i go about changing this number so its 1:1?
View 9 Replies View RelatedI needed to edit the layout of a form which was in PDF format and sharp. I opened it in Photoshop which put it at 300 resolution. I made my changes and saved it back to PDF. When I opened it in Acrobat, it was blurred. Not badly, but just enough to notice.
How can I make sharper? Is there a step I'm missing?
I've tried doing a block that automatically updates the X and Y coordinates from its moveable leader. I can get it to work in model space or paper space. But my problem is I want it to work in PS, but update with the MS coordinates through the viewport.
I can get it to update, by LISP, by picking a point and passing the points to the blocks attributes. At the moment I have a LISP when actioned it locks the viewports, activates the viewport, and asks you to select a point. Once selected it de-activates the viewport (going back into layout tab) then asks which block you want to update. Where you now select the block and it updates the coordinates. I.e. manually pick the point in MS, switch to PS and then manually pick the block. Then I have to manually modify the leader to the correct location.
I'm hoping that I can (In PS) move the end of the leader to snap to a position in MS and the coord updates to reflect the correct MS coordinates. I'm thinking that maybe this can't be done automatically and that I maybe can move the leader but I'm not sure how I can do it without running a LISP to update the block?
I'd be happy moving the leader then just running a single command and the leader coordinates updating without having to select the points and the block again.
I've attached the block showing the auto update of the attributes (fields).
I have photoshop cs4 and I cannot find the Auto smart fix, auto levels, and auto contrast nor the adjustment for each that I had with photoshop elements.
View 10 Replies View RelatedI'm running on LR 5.3, but this problem persisted in LR 5.2. Working in PS CS6 and Camera Raw 8.3. RAWs are NEFs from a Nikon D600.
I can't figure out what happened but suddenly I am not getting prompts when moving from LR to PS to "Edit Original" or "Edit a Copy".
I reset all dialog warnings and nothing. The prompt will appear for TIFFs but not for NEFs.
It's kind of pointless to not be able to choose to edit an original or copy with LR adjustments for a RAW when they are the file types that retain my RAW editing information.
Plus, when I do click on a NEF and choose to edit in PS without the prompt (it will appear with lightroom adjustments, not as original), it will open a second icon for photoshop on my dock, and prompt me to continue trial? I have a version of PS installed with the serial plugged in, and in LR "edit in PS" for a TIFF will open this primary version.
Everything works fine with Auto Import except when an image arrives in LR so does the Import Dialog Window and I have to click it away with every shot. I am in the Library Loup View in the Fit mode. This happens weather the Import preferences has "Show import dialog when a memory card is detected" checked or not.I have Win XP 64bit.
View 3 Replies View RelatedI was using these tool on a lot of images, because they often seemed to vastly improve them, making the colors pop on otherwise somewhat dull ones, and getting rid of unwanted color casts..
Later though I noticed that it is often at the cost of burning out hightlights in some areas beyond salvation.I also find shadow /highlight sometimes does this also.
Then I tried to protect some small areas with a mask before proceeding, but it seems that I can't find information on just painting a mask, but only videos with much more complex adjustment such as the Russel Crow or Lynda ones with maintaing hair detail while superimposing images, which is way beyond what I need in these cases.
If I try the wand to select and inverse I get unnatural looking divisions. Is it a matter of feathering to the right extent?
I have just moved from 7.0 to CS3 (and PC to Mac) and am currently trying to get to grips with the new features! Once which I love is the auto-align and auto-blend feature(s). My question is, is there any way to control how these features work? I have seen on some web sites people talk about 'fuzziness' sliders where you can control that if an object (pixels) appear in X% of the photos they should/shouldn't be included in the final image but I cannot find these.
My intention is to use these features to take photos of monuments and have the people who are moving about removed from the final image (I guess it's the auto-align that would do this.) I tried a test and took a number of photos at home but I kept moving one object around (a pen.) The pen appears in all the images but in a different location so it always appears in the final image. When I tried auto-align with a stack that included one image without the pen, the pen was removed from the final image. Given the first scenario (i.e. the object is in all the images but in a different location) is there any way of automatically removing it using auto-align or would this have to be a manual process? In the real world, it would be possible to take a photo of a monument with people in different locations but it would be much harder (or take a long time) to take one where at least one person was not in all the photos (there's always someone loitering.)
I've had this issue recently where my Presets won't automatically preview like they used to. I've tried switching back and forth between Library and Develop, but no luck. I'm forced to apply a preset and then remove if I don't like.
View 2 Replies View RelatedThis seems to have been a problem with previous lightrooms and thought it may have been fixed in LR4 but I can't seem to find the option?
What I have a gripe with is why when I am exporting my editied raws into what ever jpeg format I want (highres low res etc) I put these in a folder with in the orgional raws parent folder and call it "02 - High_Res" for example. To then get this to show in the lightroom folder structure you then have to 'sync' the folder. Is there a way to have this done automatically? Is there a way I can just get it to appear with out syncing?
Auto exposure with Lightroom has a default clipping of shadows and highlights,is it possible for this to be changed in a prefs of some sort?
View 6 Replies View Relatedmy workflow is to copy all photos from my camera to a folder that is configured for auto import.Lightroom takes these pics and import them to the library.But it does not exclude duplicate photos. If I copy the same photos to the auto import folder again, LR imports all photos again.
Why can't I configure to exclude duplicates as it works with the manual import function?
I would like to disable auto import.
I uncheck "Show import dialog when a memory card is detected" under Edit - preferences - Import. However, it rechecks itself when I close lightroom down. Then whenever I put in a storage device -- a memory card, external hard drive, flash drive, etc -- Lightroom starts up and wants to import from that device.
How do I prevent this?
I just got a new computer and use Lightroom 3.6. Now when I make a slide show and save it as a PDF it won't auto-advance to the next slide when running. When I review it in Lightroom it auto-advances fine but when I run the PDF file it sticks on the first slide and must be advanced manually. I believe I'm running the latest version of Adobe Reader as I just downloaded it last week when I got my new computer. how to get the auto-advance feature running like it did on my old computer?
View 2 Replies View RelatedEven when I only want to check mail, the import screen always comes on and has to be x'ed out. (It is an update version from 3 to 5). In program properties there is no appropriate tick I can remove to stop it.
View 4 Replies View RelatedWhen I insert an SD card in my computer (or flash drive), Lightroom automatically launches. How do I turn this off? It is really interfering with my ability to get other work done on the computer since I put my flash drive in 20 times a day. I have Windows 7, and use Lightroom 3.
View 3 Replies View RelatedWhenever I add new files to my image archive, Lightroom automatically assigns some old keywords to the new files. I suppose this is a preset I made some time back but I cannot find the preset to delete it or turn it off. How do I find it and delete it so that it doesn't auto keyword my new files?
View 1 Replies View RelatedIs it simply a way to condense screen real estate to manage a lot of images -- especially ones shot for HDR, for example, which are varying exposures of the same view? I would love to see an analysis of the meta data to create smart stacks suitable for panoramic merging or HDR depending on how they were shot. Then the next logical request would be for a Process the Stacks in Photoshop, thus automating this process.
View 1 Replies View RelatedI have to process about close to 400 pictures every weekend which takes a lot of time when doing levels and everything on every individual picture.
I need to create a preset that will do just that on 400 pictures but will make adjustments based on each individual picture's needs. I have tried to work on 1 picture while have the rest selected and Auto Sync selected. But what it does then is to apply the same values on all selected pictures and not "auto" for every individual picture.
