Lightroom :: Can't Print In Proper Orientation
Jun 17, 2012
I cannot print in proper orientation. I have Rotate to Fit turned on in the print module. I tried both orientations under Page Setup. Doesn't even work in Photoshop. Not all photos, just this one. Very frustrating.
Â
I have Auto Rotate turned on in my Canon 7D. I was shooting nearly straight up for this image. But, it's a horizontal image, not vertical.
Â
Also, I exported the original to a TIFF file, from Lightroom, and opened in Photoshop. Doesn't matter. Same problem. Is it the photo information or Lightroom or the way it was imported?
Â
Perhaps it was captured as a vertical instead of a horizontal. I think I rotated it in the Develop module. What does any of this matter anyway? Shouldn't I be able to print what I see on the screen?
Â
Lightroom 4.1
MAC OS 10.6.8
View 2 Replies
ADVERTISEMENT
Jul 25, 2012
I am trying to print a landscape oriented image. I choose an 11 x 17 paper size (entered as a custom size) to accommodate the print.
Â
In Page Setup I choose landscape mode. On screen the paper is landscape but the image is vertical. When I choose vertical mode, the paper is vertical but the image is horizontal.
Â
I try to switch width and height in Manage Custom Sizes but it only makes the opposite happen from the above scenario.
Â
When I print, the paper is vertical with half the image printed horizontal.
View 3 Replies
View Related
Jun 22, 2012
I upgraded from elements to CS6, but in print dialogue box I cant see a way to change orientation of the image independent of paper orientation, (not just the paper orientation which i keep portrait), so for landscape printing i have to rotate the image 90 degrees then go to print, in elements i could rotate the image while leaving paper set to portrait.
View 3 Replies
View Related
May 23, 2012
I have 17 printers installed. all but 2 use match orientation. The Canon W6400PG and the MP 5500 use printer orientation. Is there a way to change those 2 to match all the others that work just fine? The default is the HP LaserJet 1200 Series PCL 5.
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
View 8 Replies
View Related
Oct 17, 2012
INVENTOR 2012 SP 2
I have an .idw file with many sheets, the sheets are a mix of landscape and portrait, when i print all sheets i can not control if the prints all come out in the correct orientation on the paper. For example, see attached pic., this sheet needs to be rotated to fit on paper.
View 2 Replies
View Related
Sep 24, 2013
Copied the printer configuration (pc3 and pmp) from AutoCAD 2013 to AutoCAD 2012. Plot the same drawing with that same printer configuration. With AutoCAD 2013, it plots out fine - page orientation landscape. In 2012, it plots out wrong. The orientation of the drawing is correct, but the paper is changed to portrait?
The plot setting are exactly the same in both versions.
View 3 Replies
View Related
Aug 29, 2013
I am a Mac user and new to AutoCAD. I am enrolled in a CAD class this semester and the instructor for my session is requiring Windows. Supposedly this is because AutoCAD for Mac does not allow for proper printing on their plot style setting.Â
I understand that I can install Bootcamp and Windows on my computer, but I'd really like to avoid that if I can. If I were to do my work on my Mac and then digitally transfer my files to a PC for printing purposes, would my files become corrupted or compromised in any way?
View 2 Replies
View Related
Jun 12, 2012
I understand that backuping my catalog will save all my adjustments in Lightroom. However, I jump over to edit externally in Photoshop often. I understand that to create a Tiff file next to my original file. However, isn't just backing up the catalog missing the Tiff file now in the backup?
View 2 Replies
View Related
Nov 25, 2012
In LR4 print module the print and print one tabs are greyed out and I can't reset.
View 1 Replies
View Related
Nov 1, 2013
I wanted to create an A4 borderless print in my canon mg6150 from within the print module. I can do a borderless print using the canon easyprint.
Â
I go into page setup and the properties of my printer and set the page layout to borderless and click OK.
Â
However, I am unable to set the margins to zero. When I go back into my page setup and check the page layout, it has reverted to normal so it has ignored my setting.
View 2 Replies
View Related
Jan 7, 2014
All was working OK and the printer is showing ink cartridges almost full In the Library Module the print review is fine.
Switch to Print Module and the print review is now blank (100% white)
Pictures no longer print
Windows 7
Espon Artisan 835 printer
LR5.3
View 1 Replies
View Related
Feb 28, 2014
I have just bought and installed Lightroom 5 and need to set my print size to A3 and in the future even bigger. I do not have the facility at home and need to have them sized correctly for the print shop so they do not have to waste time resizing them. I am at a loss how to do this. I cant find any settings for this size print. A3 is roughly 42 x 29.7 cm.
View 2 Replies
View Related
Apr 1, 2012
I cannot seem to reset the print template screen while in the " Print " module. It has adopted the smallest pic size with three times the normal border. I wish to reset to full screen in print module
View 1 Replies
View Related
Oct 14, 2012
How to ADD (almost) white Border around photo(s) to print in print module (not for creating a JPEG)Â WITHOUT TRIMMING the photo?
Â
 I dont understand why I'm so stupid not to be able to acheeve this simple task with Lightroom WITHOUT TRIMMING the image (altering it's proportion and cutting away photo-content)
Â
 (on light-gray backgrownd for instance, to use as cutting indications. I know how to use cutting-indications for images i print without a border)
Â
(i do not whant to use workarounds, the kind of preparing "identity plates", a new one each for infinite variations of proportions to use as fullblown-up backgrounds..)
View 1 Replies
View Related
Oct 13, 2012
How do I get my photos printed? I select a photo but I get the maessage that no photo was selected.
View 2 Replies
View Related
Sep 26, 2012
Epson 3880.
Lightroom 4.
Moutain Lion.
All current.
Â
I am trying to print on 5x7 paper. I set the page setup to 5x7. I have the margins set to .2" on each side. The layout image inside Lr looks exactly how I want it to.Then I print. I end up with a .125" margin on the left and top, and a .625" margin on the right and bottom.
View 6 Replies
View Related
Apr 13, 2012
It seems that, no matter how many times i save and update the profile, all the print setting (image size, sharpening, bit depth, color management, ...) are store within the preset, all but the Epson Driver settings, which have to be selected every single time.
Â
I really can't remember if this bug was present in 4.0 or not (I'm currently running 4.1 RC), but I'm quite sure it was working OK under 3.x. Here's the thing.
Â
I configure the printing settings and create. a profile: Profile1.I change all the settings and create a second profile: Profile2. The "Print Settings" settings are different, same printer, one for Color (Profile1), one for Advanced B&W (Profile2).I click on Profile1 (which was created with color Print Settings). Clicking on "Print Settings" or "Print", the printer settings selected under the epson driver is the ABW one (the one that belongs to Profile2).I reselect the correct setting from "Print Settings..." (Color).Click "Save" again.Righ-t click on Profile1 -> Update with current Settings. Setting seems to be saved.I then click on Profile2 and bam! The "Print Settings..." seems to be rverted to color instead of ABW.Update the correct settings, back to point #3Â
Â
Can you reproduce this? This behavior is vanishig the power of the "Print One" button, unless you constantly print with tha same Driver settings.
Â
---
Â
Lightroom version: 4.1 RC [820174]
Version: 10.7 [3]
Application architecture: x64
Physical processor count: 4
Processor speed: 2,4 GHz
Built-in memory: 8192,0 MB
Real memory available to Lightroom: 8192,0 MB
Real memory used by Lightroom: 2388,3 MB (29,1%)
Virtual memory used by Lightroom: 4759,6 MB
Memory cache size: 866,7 MB
Displays: 1) 2560x1440, 2) 1680x1050
Â
---
Â
Epson R3000, latest OS X Epson Drivers.
View 2 Replies
View Related
Jun 6, 2009
How do I batch print several exposures at one time that differ in orientation (Landscape, Portrait) or print size (4X6 - 8 X10) or both orientation and print size? I currently have Lightroom 2.3 installed on a XP SP3 machine.
Â
I have been unable to find any documentation on this subject.
View 2 Replies
View Related
Mar 13, 2013
My "Print One" button in the Print Module of LR3 is not activated. What is amiss and how do I reactivate the button?
View 1 Replies
View Related
Feb 11, 2013
I set up a print package in lightroom v4.1 and adjusted the image in the cell to fit properly, however when I try to print to file the resulting file moves the crop to cut off the top of my subject's head. It seems that I can get around this by intentionally moving the image so that it appears to cut off her head, then when it prints it looks correct (the adjustments im doing are moving backwards?). This works for now but I have no specific control over my crop, I just have to guess and check which does not work for large quantities of images
View 1 Replies
View Related
Jun 29, 2013
I am trying to print a 16" x 20" photo through Lightroom's print module. I am using an Epson 3880 printer and 17" x 22" paper. I have done this in Lightroom 4 with no problems. Now I am getting a print that is 16-3/8" x 20-1/2". I have the cell size set at 16" x 20" and borderless printing is turned off. I also checked zoomed to fill. This has also happened on a couple of 12" x 18" photos.
View 2 Replies
View Related
Mar 14, 2014
Was printing 4x6" from LR 5.3 fine. To an Epson 3880. Then went to Page Settings (MAC) changed paper size to 8.5x11". The preview responded with a larger page. I scaled the image up to 8x10 via lightroom cell size. But when I printed to the Letter size paper, LR printed only a close to 4x6" top left corner. This was not a full image like the 4x6. It was just a corner.
Â
Exported to PS and printed fine.Can not figure why the print will not print the full image?
View 1 Replies
View Related
Nov 1, 2012
I get a pop up of "Save Files To Folder", but no file names are present, so "save" does nothing. I have all the boxes checked in Print Job, e.g. print to Jpeg file. I have searched, re-read Kelby etc. and come up blank. I have a profile entered for a custom lab.
View 1 Replies
View Related
Dec 6, 2012
A few weeks ago I tried to print from the print module and instead of a picture showing up, there was a white space. I have uninstalled and reinstalled LR 3 times.
View 2 Replies
View Related
Dec 27, 2011
When I try to print a JPG from the Print module in LR 3.6 (and tried it also with 3.5), it does not always recognize the resolution settings.  Most of the time (and I can't see what makes the difference) it prints the JPG to a 96 ppi resolution regardless of what setting I use for resolution.
View 6 Replies
View Related
Apr 16, 2009
properly resizing a color logo. I opened the logo in photoshop 1200dpi by 800dpi I need to resize it to 300dpi. When I do it loses its crispness, the diagonal edges show significant aliasing. I need the curves and edges to remain crisp.
View 5 Replies
View Related
Jun 15, 2012
I have Photoshop CS5, and everytime I try to make a gif I can't get the proper frame from the video...I keep getting the same one over and over again...
View 1 Replies
View Related
Mar 20, 2009
Running Vista and CS3. I have downloaded a logo from a client that is a blue rectangle with reversed out type in the middle. The image is a JPEG but at full size looks fine displayed in Photoshop CS3 and is showing a ppi as a little over 300. And yet when I file>place the image into InDesign the type comes out completely pixelated to the point of not even being readable. I've tried saving it as a PSD and TIF but they all still show the same pixeled type. It seems like I'm missing something simple but I'm at a loss. Can anybody suggest what would cause this?
View 4 Replies
View Related
Feb 12, 2009
Hi, I'm trying to merge photos that I shot for HDR from Bridge. When I select a few photos and use the command 'Tools/Photoshop/Merge to HDR/', the images open up in the dialog OK but the exposures it is 'guessing' are all wrong. It is selecting my underexposed shot as the 'EV 0', with my properly exposed and over exposed shots listing as 'EV +1.64' and 'EV -4' respectively. This is all wrong.
- Is there a way to change what Photoshop selects as the exposures?
I tried moving them, all sorts of click combinations, etc. It appears that they are stuck. When I shoot, it is -2EV, 0EV, +2EV.
Now interestingly, when I first open the photos in Photshop, then launch the 'Merge to HDR' dialog, adding the open files, it picks up the exposure just fine. This is just adding a few more steps to the workflow.
View 21 Replies
View Related
Oct 24, 2013
I'm currently having a debate within my drafting dept. as to which string of dims is more correct..
View 9 Replies
View Related
May 23, 2011
What is the proper way of creating a block?
I did 19 drawings, created blocks using the CREATE button, at first I could Insert them into any other drawing. But I saw this definition in a book,
Creates a block from separate entities (internal to current drawing), does this mean that a user on another computer cannot use my block unless he has the original drawing?
My boss told me that he uses WBLOCK instead, which writes to an external file.
I'm asking because out of the 19 drawings, 9-10 of them have the error "block referencing itself". I guess this is probably me naming the blocks the same as my file names.
So before I go any further, what is the proper way to create a block that can be used? I also shared my CAD folder on the network.
View 9 Replies
View Related
