Lightroom :: 4.1 Orientation Wrong In Print Module?
Jul 25, 2012
I am trying to print a landscape oriented image. I choose an 11 x 17 paper size (entered as a custom size) to accommodate the print.
In Page Setup I choose landscape mode. On screen the paper is landscape but the image is vertical. When I choose vertical mode, the paper is vertical but the image is horizontal.
I try to switch width and height in Manage Custom Sizes but it only makes the opposite happen from the above scenario.
When I print, the paper is vertical with half the image printed horizontal.
View 3 Replies
ADVERTISEMENT
Nov 25, 2012
In LR4 print module the print and print one tabs are greyed out and I can't reset.
View 1 Replies
View Related
Jun 17, 2012
I cannot print in proper orientation. I have Rotate to Fit turned on in the print module. I tried both orientations under Page Setup. Doesn't even work in Photoshop. Not all photos, just this one. Very frustrating.
I have Auto Rotate turned on in my Canon 7D. I was shooting nearly straight up for this image. But, it's a horizontal image, not vertical.
Also, I exported the original to a TIFF file, from Lightroom, and opened in Photoshop. Doesn't matter. Same problem. Is it the photo information or Lightroom or the way it was imported?
Perhaps it was captured as a vertical instead of a horizontal. I think I rotated it in the Develop module. What does any of this matter anyway? Shouldn't I be able to print what I see on the screen?
Lightroom 4.1
MAC OS 10.6.8
View 2 Replies
View Related
Nov 1, 2013
I wanted to create an A4 borderless print in my canon mg6150 from within the print module. I can do a borderless print using the canon easyprint.
I go into page setup and the properties of my printer and set the page layout to borderless and click OK.
However, I am unable to set the margins to zero. When I go back into my page setup and check the page layout, it has reverted to normal so it has ignored my setting.
View 2 Replies
View Related
Jan 7, 2014
All was working OK and the printer is showing ink cartridges almost full In the Library Module the print review is fine.
Switch to Print Module and the print review is now blank (100% white)
Pictures no longer print
Windows 7
Espon Artisan 835 printer
LR5.3
View 1 Replies
View Related
Apr 1, 2012
I cannot seem to reset the print template screen while in the " Print " module. It has adopted the smallest pic size with three times the normal border. I wish to reset to full screen in print module
View 1 Replies
View Related
Oct 14, 2012
How to ADD (almost) white Border around photo(s) to print in print module (not for creating a JPEG) WITHOUT TRIMMING the photo?
I dont understand why I'm so stupid not to be able to acheeve this simple task with Lightroom WITHOUT TRIMMING the image (altering it's proportion and cutting away photo-content)
(on light-gray backgrownd for instance, to use as cutting indications. I know how to use cutting-indications for images i print without a border)
(i do not whant to use workarounds, the kind of preparing "identity plates", a new one each for infinite variations of proportions to use as fullblown-up backgrounds..)
View 1 Replies
View Related
Mar 13, 2013
My "Print One" button in the Print Module of LR3 is not activated. What is amiss and how do I reactivate the button?
View 1 Replies
View Related
Jun 29, 2013
I am trying to print a 16" x 20" photo through Lightroom's print module. I am using an Epson 3880 printer and 17" x 22" paper. I have done this in Lightroom 4 with no problems. Now I am getting a print that is 16-3/8" x 20-1/2". I have the cell size set at 16" x 20" and borderless printing is turned off. I also checked zoomed to fill. This has also happened on a couple of 12" x 18" photos.
View 2 Replies
View Related
Nov 1, 2012
I get a pop up of "Save Files To Folder", but no file names are present, so "save" does nothing. I have all the boxes checked in Print Job, e.g. print to Jpeg file. I have searched, re-read Kelby etc. and come up blank. I have a profile entered for a custom lab.
View 1 Replies
View Related
May 1, 2012
I've been playing around with Exif orientation data, and CS4 always shows the orientation as "Normal" in File -> File Info. However, looking at the same EXIF information with other programs (e.g. Picasa), I see the appropriate rotation information, which is consistent with how I took the photos. Is this a bug in Photoshop CS4? I took the photos with an iPhone 4, by the way.
View 6 Replies
View Related
Sep 25, 2013
I import dxf file created in CadKey or SolidWorks. I have done this thousands of times but all of a sudden they do not import in the correct orientation x/y plane. They appear to be importing on the edge. I have gone back to old dxf files that have worked perfectly in the past and they no longer import correctly.
Have I, unknowingly, changed some setting on Corel that effects the import of dxf files?
View 1 Replies
View Related
Sep 4, 2012
i have to admit i rarely printed from LR before.most of the time i print from photoshop.but yesterday i had to print a lot of small images so i thought i try LR for it.
i wanted to print a few 35x45mm images on DIN A4 paper.
images dimensions are correct (35x45mm 360 DPI) and it prints as 35x45mm images when i use photoshop.
when i use LR and i set the cell size to 35x45mm the prints come out to small by a couple of millimeters.
LR has not so many print settings i could have messed up.. right?
View 1 Replies
View Related
Feb 28, 2014
I'm trying to lay out an 8x10 cell in LR5. My page is a custom package and set up as an 8.5x11 sheet . When I click to add an 8x10 cell, I only get a cell that is ~ 8x8 and I have to drag the bottom down to 10".
View 2 Replies
View Related
Jul 18, 2012
Corel X5 Service Pack 2Windows 7 (64bit)
HP 5100tn with HP Universal Postscript Driver 5.4
I cannot make my Custom 12.25 X 18 paper print correctly. Corel and the HP Printing preferences are in sync (it seems) but the print always print in the same spot, regardless of orientation...
View 14 Replies
View Related
Jan 23, 2013
When I'm printing on CorelDRAW X6, it show me the wrong size and orientation , everything was perfect on CorelDRAW X5 and I'm fully updated. What can I do?
View 3 Replies
View Related
Dec 6, 2012
A few weeks ago I tried to print from the print module and instead of a picture showing up, there was a white space. I have uninstalled and reinstalled LR 3 times.
View 2 Replies
View Related
Dec 27, 2011
When I try to print a JPG from the Print module in LR 3.6 (and tried it also with 3.5), it does not always recognize the resolution settings. Most of the time (and I can't see what makes the difference) it prints the JPG to a 96 ppi resolution regardless of what setting I use for resolution.
View 6 Replies
View Related
Feb 10, 2014
I want to print a photo in 5x7in.I have a Epson Stylus Photo PX710W printer. I select it from Page Setup button.Then i select the paper size as 5x7in (13x18cm)
But i couldnt set the margins in same size.Left, right and top can be set as 2,8mm. minimum but bottom can set to 3,2mm.Zoom to fill and rotate to fitt both are selected.
Cell size is: 121,0mm. maximum size.
Cell widht is: 172,1mm. maximum size.
I uninstalled my Printer's drivers and software and reinstalled it, but nothing has changed.Then i reinstalled Lightroom but no changes.I use the latest Lightroom 5.3
View 2 Replies
View Related
Nov 26, 2012
I am trying to add new Epson ICC profiles to my lightroom4 print module. I downloaded them from Epson but I do not see them in my ICC list that exhists in the print module uner Other for color managment
View 2 Replies
View Related
Nov 25, 2012
get message in header that Libary Not responding. Cannot even get print to open - get the loading "circle" have waited a long time.
i have win 7 64 bit. 8 g ram
View 2 Replies
View Related
Jan 22, 2012
When I set a margin with the Print module (Lr v3), does it also include the "page bleed" dimension the printer requires for properly printing the bottom of the page?
The problem I'm having is with printing landscape prints and the left & right margins not being equal. I cannot find anything about the page bleed dimensions for my HP B9180 printer and maybe it varies a bit (1mm?) from one B9180 to another(?) In any case, is there a systematic approach for determining the page bleed for a printer? I imagine the only way to accommodate for the asymetry is to account for it in top/bottom margins, correct(?)
View 3 Replies
View Related
Nov 4, 2012
MBP Late 2011 running OS X 10.8.2
16 GB ram
300GB+ free
I last printed about a week ago. Trying to print now results in an immediate crash. Tried multiple photos from different cameras and different catalogs. Different printers including printing to pdf all crash immediately. Repaired disk permissions. Reinstalled the app. Reinstalled Mountain Lion, uninstalled (to trash, empty trash, shut down and reinstall, no dice).
Can print from MS Word no problem. Photoshop Elements 9 prints photos just fine.
Crashes in a variety of low to mid thirties thread (lowest I have seen is 28, highest is 35) but I have not checked every crash report for the thread number.
View 2 Replies
View Related
Jun 18, 2012
want to add text twice in print module, seems only option is identity plate and it cant be duplicated?
View 2 Replies
View Related
Oct 15, 2013
Is it possible to zoom in on the page you are creating in LR4? I intend to make a poster apx. 50x80 cm with a lot of small photos on it. Without a zoom it will be difficult to position each little photo correctly
View 2 Replies
View Related
Mar 21, 2012
When I try to switch to the Print module in LR 4, the program locks up. I am using Windows 7.
View 2 Replies
View Related
Jul 12, 2013
I don't know if this is just a Windows 8 compatibility issue, but when I save an edited photo it is stored in whatever orientation I opened it. Also the thumbnails only show the original imported image, not the edited image.
For instance if I took a picture in a sideways orientation on my smart phone then opened it in PPX5 I can rotate, edit and save and it will show the original image in a sideways orientation. If I post the image on Facebook it will show up sideways. If I put it on a forum it may look okay but people with iPads and iPhones see it sideways.
View 2 Replies
View Related
Dec 12, 2013
using lightroom 4 in print module only filmstrip is grayed out and will not print, it is normal in other modes
i just upgraded the catalog to Lightroom 5 and i have exactly the same problem.
View 2 Replies
View Related
Feb 20, 2010
Whenever I try to enter the print module Windows tells me Lightroom has encountered a problem and needs to close. The print module worked fine some weeks ago, but now it doesn't. Everything else seems to work fine.
First thing I tried was to relaunch and optimize my catalog which didn't work.
I then tried to reinstall LR 2.4 with no luck. I then Downloaded and installed 2.6, still no luck.
I had cleaned the registry after the print module worked last time, so I reloaded the registry with those values, still no luck.
I then deleted Lightroom 2 Preferences.agprefs and let LR relaunch to create a new one. Now the print module works.
As I am not using the default catalog I went into preferences and pointed LR to my catalogue and then relaunched again thinking the problem was solved. But when I tried to go into the Print module LR crashed again.
I figured that since the Print module worked with the empty default catalog the error must lie somewhere in my catalog. I therefore went back and tried using one of my backup catalogs, but LR crashed again when I tried to access the Print module. I even went back and tried all my backup catalogs and a couple of the oldest ones does not cause LR to crash when going into the Print module.
I'm on Vista with 4 gb of RAM, using dual monitors, and I've tried reducing the resolution and using only one screen as well.
So, my question is what could possibly go wrong inside a catalog file that would cause LR to crash in one module only? And why is it that the backups saved even the month before I last used the print module also causes the problem? Seeing as how I've been using that very same catalog and having a working print module?
View 6 Replies
View Related
Apr 26, 2013
Out of nowhere, the 'Save As' function isn't available in the Print Module. I have updated to 4.4, restarted Lightroom, etc. I can still export the images, just not save as a jpg.
View 19 Replies
View Related
Dec 12, 2012
When going from any module into the Print Module, Lightroom crashes. Another thread suggested using a new catalog without any templates. I did and the application did not crash. Unfortunately, Lightroom is now booting into the print module with the catalog that is causing it to crash. From previous threads it sounds as if the issue was print templates. How do I delete the error causing templates?
View 4 Replies
View Related
