Corel X5 Service Pack 2Windows 7 (64bit)
HP 5100tn with HP Universal Postscript Driver 5.4
I cannot make my Custom 12.25 X 18 paper print correctly. Corel and the HP Printing preferences are in sync (it seems) but the print always print in the same spot, regardless of orientation...
I have recently installed a computer system and the Plotter the client is using is a Canon W7200; Canon have refused to release any updated drivers and there were never any previous 64bit drivers that were created for this piece of hardware.
Are there any Universal Plotting Drivers? or a Generic one that can be used with all Canon Plotters?
Ever since updating our print server to use the HP Universal driver, my ability to tweak the non-printable margins has gone away. In the past I was always able to easily tweak margins within my PC3 files using the "Modify Standard Paper Sizes (Printable Area)" tool. Setting all four values to say "0.25" would result in an even 1/4" margin around all four edges of the paper.
Now however, that behavior is just plain different. Using 0.25 all the way around results in plots that are partially shifted off the page. Using different values for top, bottom, left and right results in one or two margins coming out much wider than I want. The frustrating part is there seems to be no rhyme or reason between these values and the plot output. The default values are 0.17 for Top/Bottom and 0.25 for Left/Right but even this results in uneven margins. Only if I make the slightest of tweaks can I get any tiny bit of improvement, which is still not up to previous standards. Anything larger and the output is much worse. I've tried all 0.0, setting top/bot only. left/right only, but none of my combinations of values works.
On top of that there seems to be inconsistency between each printer, even when the printer Model is the same. For example the output on my 9050DN printers range from just "Decent but not like before" to plain "awful". My older 8150 DN models look the best but still do not match previous output.
Is there an alternative way to adjust paper margins? Is there a new method to adjusting the "Modify Standard Paper Sizes (Printable Area)" ?
I import dxf file created in CadKey or SolidWorks. I have done this thousands of times but all of a sudden they do not import in the correct orientation x/y plane. They appear to be importing on the edge. I have gone back to old dxf files that have worked perfectly in the past and they no longer import correctly.
Have I, unknowingly, changed some setting on Corel that effects the import of dxf files?
When I'm printing on CorelDRAW X6, it show me the wrong size and orientation , everything was perfect on CorelDRAW X5 and I'm fully updated. What can I do?
View 3 Replies View RelatedI just upgraded to X6. My previous version of CorelDraw used to prompt me when I tried printing a landscape oriented file without changing my printer setup to landscape. This version just goes ahead and prints without matching the paper orientation. I can't tell you how much paper I've wasted!
Is there a setting in X6 that will cause the program to tell me when the project's orientation doesn't match that of my printer setup?
I require an equally spaced fine line shading in an extrusion. I will take you through my process and then get to the problem.
I create an object (usually curved text), extrude it and break the extrusion apart; then I use the fill tool and open fill color dialog, change to palettes and select black, 20%; next I click on options and select Postscript options, from there I select line and an angle and frequency. This produces exactly the fine line shading I need, when I print it on my postscript printer.
The problem is that when I save the file as an .eps or .ai file to send to another prepress, the screen in their file always show up as dots not lines. I have not been able to find a way around this, the other fill types use tiling and that does not produce the same consistent shading.
I don't know if this is just a Windows 8 compatibility issue, but when I save an edited photo it is stored in whatever orientation I opened it. Also the thumbnails only show the original imported image, not the edited image.
For instance if I took a picture in a sideways orientation on my smart phone then opened it in PPX5 I can rotate, edit and save and it will show the original image in a sideways orientation. If I post the image on Facebook it will show up sideways. If I put it on a forum it may look okay but people with iPads and iPhones see it sideways.
I am trying to print a landscape oriented image. I choose an 11 x 17 paper size (entered as a custom size) to accommodate the print.
In Page Setup I choose landscape mode. On screen the paper is landscape but the image is vertical. When I choose vertical mode, the paper is vertical but the image is horizontal.
I try to switch width and height in Manage Custom Sizes but it only makes the opposite happen from the above scenario.
When I print, the paper is vertical with half the image printed horizontal.
I've been playing around with Exif orientation data, and CS4 always shows the orientation as "Normal" in File -> File Info. However, looking at the same EXIF information with other programs (e.g. Picasa), I see the appropriate rotation information, which is consistent with how I took the photos. Is this a bug in Photoshop CS4? I took the photos with an iPhone 4, by the way.
View 6 Replies View RelatedI know there must be a way to change the colors of multiple objects without doing each one manually. But I am not finding the instruction. Say I have 17 parts of a drawing that are blue, and decide I'd rather have them blue/green.
View 5 Replies View RelatedWe have a Universal Laser M360 that we were using Corel Draw 9 with and it worked fine. Now we are opening those cdr files in Corel Draw X5 and getting strange printing results: Missing words or sometimes whole lines. It's a really big problem for us. I have reinstalled the print drivers and even reset the CPU on the engraver. All of my RGB color settings seem correct.
View 8 Replies View RelatedWhen trying to change the plotter name to 'Adobe PDF' I cannot get the paper size and orientation to change.
I change to 'Adobe PDF', then change the properties to ARCH D drawing size and landscape, click OK, save changes to printer config and when it returns to Plot-Model window nothing is changed.We just switched over from Windows XP to Windows7.
I'm running LT 2014 at Win7 x64 and have a problem with Xerox WF 6604 custom size paper settings.
Simply say when I change custom printer size at the printer's driver settings and confirm all dialogs nothing happend and LT use default settings. No dialog about new or temporary PC3 appear so looks that ACAD doesnt know about change at the printer driver?
This problem isn't continual but, for example, I printed something from the same dwg twice, but when third one change was set the very problem will appear and ACAD doesn't register changes.
My old Xerox PS printer gave up the ghost, so I'm looking for a new Black and White Postscript Laser Printer.
One factor that is important to me is replacement cartridge cost.
I'm thinking HP for brand but am open to others.
Quick question about the postscript fill in CorelDRAW x4. I have a shape which I am filling with a hatch from the postscript fill menu. Corel recognizes that the hatch is there, but I cannot see it on screen. I have my screen set on "Enhanced" view and still cannot see the fill. Just wondering if there is something I can do to make the PS fills viewable on screen.
View 1 Replies View RelatedI often have the need to change the orientation of my vieports to better fit my project.
I often, and I mean 9/10 times get one or more fata errors when try to do so.
For clarification I am grabbing the wheel in the top right corner between N and E and rotating the view. When I release the drawing is not in view. Then the program crashes.
It is very frustrating and adding hour on to my day.
CPU: (Brand NEW)
MSI GT70
Intel Core i7-3610QM
NVIDIA Geforce GTX 670M/3G GDDR5
12 (+4) GB of RAM
I know I am not running a quadro but I should still be able to handle this type of task.
I have a new HP Laserjet M712 B&W printer to replace my aging HP 5000 printer. I'm using X3 & X5 and have installed the HP Universal Postscript driver. The printer is Postscript 3 emulation capable. I have all the settings in the print dialog of Corel the same as the settings from my HP5000 printer, but the new printer fails to print halftones or "dots". The halftone areas are still printing as a solid although I have my screen frequency at 45lpi. Is this a Corel issue or is it a Windows 7 problem, or some kind of user error.
View 1 Replies View RelatedI cannot get Coreldraw X5 to to print in landscape. I am using a GCC postscript printer and Windows XP.
View 1 Replies View RelatedI run a little print shop as part of our Charity and we produce T-shirts, sublimation mugs and coasters as well as some paper based goods.
I've read a lot about color management but what is the best way to to set up to print to our postscript printers (one OKI 821 & a Ricoh 820DN)
Currently I have the default workspace set to CMYK, sRGB & coated Fogra39 profiles, color engine as WCS, preserve black off and the rest as defaults.
My question is how to set up for printing to postscript? I've read that this is best for color accuracy and allows for different colour spaces with in the same document. We print a lot of cards for local artists whose images are edited in Photoshop and output as srgb jpegs. We then import these into corel and add writing using the standard CMYK palette.
At the moment when we print we have corel set to manage colours, output colours as native as there is a combination of of RGB & CMYK elements. Within the printer driver we set either CM off or ICM managed by host, depending on the driver.
Is this correct? I did have a thought that this combination may mean that effectively there is no color management happening at all!?! It is useful for us to keep the jpegs as RGB because some customers will require their artwork on sublimation items as well which require transfers being produced on a non-postscript device. For these we use a sublimation ICC profile and a PCL driver and it works well.
With postscript I have found that outputting the file as cmyk rather than native dulls the image considerably. However, using native output gives different results from both of our printers.
A colleague of mine is having the following problem: He has a dwg file (AutoCAD 2010), with all layouts set to a custom sheet of 8.5" x 13" (215.9 mm x 330.2 mm). When he makes the publish to PDF (that is AutoCAD's default PDF option), he gets all the sheets in a ginormous size: 900 mm x 1,600 mm (35.4" x 63"). See image attached.Picture1.jpg
He keeps asking me the favor to publish it, which I do without problem. I have to say that I am using AutoCAD 2012, but before I posted, I tried using yet another PC runing 2010 and there was also no problem at all.
He is able to publish regular size documents without problem. It appears to be just that one file, but only on his PC.
I have been dimensioning my 3-D model in paper space, but my dimensions are wrong and I don't understand why. The height on this drawing attached was drawn as 3'-9" but everytime I try to dimension it in paper space it reads as 3'-3 1/4". And my width should be 2'-6" and it keeps reading as 1'-11 1/4". I have no idea where this came from, and I have double checked my work several times now, it was drawn correctly. And on top of all that, now that I have been messing with it, my dimension no longer changes to oblique the right way, I think I may have changed a setting along the way and made things worse.
View 2 Replies View RelatedI'm unable to print halftone on postscript printer.
View 1 Replies View RelatedI have a simple design in coreldraw X5 and a rectangle with a postscript fill (example: color bubles), now whenever i print out this artwork the rectangle prints in a dark grey color and the rest is OK.
Before i used X4 and the same artwork with the same printer were working perfectly, but now this is happening since i use X5
I have layouts set to print to a printer in the office, sometimes with different sized sheets. Everything worked perfect until we upgraded from Civil 3d 2013 to 2014. Where I'm gettin a problem now is publishing to PDF. It will cut off the left and right margins of the 11x17 sheets. I've tried everything and looked everywhere but can't keep it from doing that.
Is there anywhere to set the publish to PDF settings? I've played with the DWG to PDF.pc3 settings and no change.
Trying to print from LR 5.3 RC using .icc profile in printer settings in Epson Pro 3800 driver the Color Settings and Color drop downs are disabled???? In other applications these options are enabled and selectable.
View 3 Replies View RelatedI recently "caught a virus" on my computer. I'm working on recovering what I lost. In the meantime, I'm using an eMachine that my Dad gave me. The OS is Windows 7, AMD ATHON II X2 220 Processor/2.80 GHz, 3.00 GB RAM, 64-bit OS and a NIVDIA 306.23 graphics driver.
Unfortunately, I'm having an odd halting behavior when editing an image. It seems that the redraw is the problem. Is there a setting I can change that will get rid of this?
I have 17 printers installed. all but 2 use match orientation. The Canon W6400PG and the MP 5500 use printer orientation. Is there a way to change those 2 to match all the others that work just fine? The default is the HP LaserJet 1200 Series PCL 5.
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
Has the been any changes to X6 since the post re: X5?
[URL]
esp. regarding spriggig's comment?
I simply need to change the orientation for printing to a RIP and X6 does not allow this -- as previous CorelDraw versions DID allow.
X6 only wants to print in Protrait orientation only -- I NEED TO PRINT IN LANDSCAPE.
I just upgraded to X5 and now suddenly I am having difficulty printing to my dell 3110cn laser printer. I get the error, "Unable to access printer driver. Try removing and reinstalling this printer driver". If I click OK I get the error a couple of more times followed by "Internal application error." Then Corel Draw crashes. My PC is running Windows 7 64 bit.
I have tried re-installing the printer driver with the latest from dell and uninstalling and re-installing corel draw, but nothing has worked. I am about ready to go back to X4.
How do I make my text curved on the bottom and flat on top? I have used the fit to path feature for the bottom curve, but I need the top of the word to stay flat.
View 3 Replies View Related