I removed the original file from the Preferences folder and restarted LR. When I have done this in the past LR does not give me a catalog listing and when LR opens, the panels are all in default mode. This time I see my usual catalog list, and all of the panels are as I set them. I checked the Preferences folder, and a new plist file has been created. What am I missing. I am having problems with the program, and wanted to reset the preferences in case the file was corrupted.
Experiencing problems with the dimension tool since upgrading to Corel Draw X6 at this end, which hasn't been resolved with the updates.
I work in mm. The system doesn't remember the default settings if I change my preferences for it to measure in mm via the customisation window or the toolbox as it used to in previous versions. When I open the program again or start a new document, the measurement default keeps changing back to ["] (inches). Sometimes, it will jump back to inches after I change the default to mm when I'm working on the same document.
Same problem seems to be happening with the other units of measure available as well.
Current workaround - the only time it seems to remember my settings is if I change the default to mm and then save a document.
I can fwd a video screen capture which shows the problem if that would work.
I'm buying a lot of presets from designers and also create a lot by my own. So not to loose the overview I want to delete those which I don't need. For example all the default ones (Lightroom Effect Presets, Lightroom Video Presets...). I tried to delete the template folder in finder, but then it shows an error at the next startup. If I just delete the subfolders, then the folders within Lightroom still appear on the panel, just the presets within are gone.
I still have to go thought all the tools if I hit the b key and the Brush was already selected. Thought the preference of the shift key would work, but know. What preference or cache do I reset or am I missing something.
I have 2 staff members who both have recently had problems with their custom settings from OPTIONS revert to the default settings every time they close out of AutoCad. One is using AutoCAD 2013 on W7 & the other is using AutoCAD 2014 on W8.1.
They have to reset their display, units, osnaps, etc regularly. I suggested creating a profile they can use until we resolve the problem,
I would like to change the default Catalogue Settings file from my C drive to a Servier drive. I am unable to find where to change it. I've found it, but cannot locate the place to change the default within Lightroom 4.
In GIMP 2.8, I'm having an issue with font settings not sticking with copied layers.
Steps to reproduce:
1. Click the text tool, then click the canvas. 2. Type the word "Cow". 3. Double Click the word "Cow" and set it to a fancy font, pink, and 24pt. 4. Select the "Cow" text layer and duplicate it. 5. Move the duplicated layer down. You now have two "Cow" layers in a pink, fancy, 24pt font. 6. Double click the word "cow" in the copied layer to highlight the word "Cow". 7. Type "Chicken" over the word "Cow"
Expected result:
The text is now "Chicken" in a fancy, pink, 24pt font.
Actual result:
The text is now "Chicken" in the default font.
In order to keep the font you want, you have to insert the new text after the first letter of the existing word. ie: "CChickenow", then remove the extra "ow" from the end, then remove the "C" from the beginning. This is very tedious and frustrating.
I am aware that you can set a default font to whatever you want (except making it bold by default?). But, if I copy a layer and type over it, it's because I wanted to copy the appearance of the layer, not start over with a new one. Is there a setting I can change? Or is this a known issue with text editing in 2.8?
So I noticed that my data reffed pipes were reverting back to their default styles in my production drawings. This wasn't a problem with SP1. I made a support call to our reseller and they mentioned that the only work around was to completely uninstall Civil3d, then reinstall back to SP1. He mentioned that he was passing the information on to Autodesk and he would let me know if they had a fix. Naturally that kind of timing or solution doesn't really work for me. This problem will effect any drawing I have that has pipes in it.
I want to know what you have done to work around this? Is there a better solution than uninstalling Civil3d?
i recently updated to 5.3 and everything was great, just like normal.. then after an import of raw files, i selected one to develop and went to look for my "exposure" slider on the right side of the screen. it has disappeared??? i also am missing my simple saturation slider too. now i have an extremely indepth saturation sliders for every color. i have tried to reset tool settings, i have searched around, i even reinstalled lightroom hoping i would get it back to what i am used to...
is there a preference file that i can delete to get me back to 100% default settings?
I want to use my Default Settings on another computer, so I need to find them and then copy them to the correct folder in the second computer.
Second question. If I also happen to apply a Preset during Import that has some of the same Develops as my Default Settings, like Lens Corrections or Sharpening, what will happen? Will the effects be cumlative/additive/doubled or will LR only apply the effect once?
I have both a Sony NEX 5 and a Sony NEX 7. I want to establish custom default settings specific to each camera and for each ISO setting I use in Lr. I know Lr has the capability to make default settings for specific camera bodies according to serial number. Sony did not include body serial numbers in the Exif files for the NEX camera line. Since I only have 1 each NEX 5 and 7, will my copy of Lr create separate custom default setting for my specific cameras so long as I don't add additional NEX 5/7 cameras to my Lr setup?
Can I import (or create) default Lightroom settings from an existing document and save them? Make them a personal default set opening with all future LR catalogs?
Since ADM is not available in CS6, I am wondering how to add preference items to the preference panel. Though AddPreferencePanel is still available in preference suite, it is taking a dialog id as parameter and the doc refers to ADMDialogSuite, so I guess it is still there by mistake.
I am using Qt, and of course I can create my own preferences dialog, but is it possible to add it to the existing preferences dialog to provide seamless interface?
I have created default settings by serial number for my Canon Mark III 1ds which include enabled lens profile corrections. I then created a user preset with these default corrections. Next I imported a folder of RAW images shot with this same Canon camera with the user profile checked as part of the import. When I switch to the Develop module and check the Lens Corrections panel, I see that although it is checked for each file, the actual make, model and profile are not populated.
Is this a bug or am I overlooking something on import? I understand that in LR 4, you can apply specific lens and camera calibration profiles to camera serial numbers (noise reduction etc too).
MacPro 2.8 Ghz Quad-Core Intel Xeon with 16 gigs of ram running OSX 10.7.2.
C3D 2013. We have profile line labels, some of which get manually edited (for example, change the "<[Tangent grade(FP|P2|RN|AP|GC|UN|SD|OF)]>" to a static number such as 0.29%).
However, if you CTRL+Click and select one of these labels and change the style of that one label, then the manual edits are lost and the label reverts back to the default string.
I have both programs but due to CC issues with Topaz and Nik plugin issues I prefer to Edit my photos from lightroom 5 in CS6. The problem is that I don't see anywhere in preferences where I can change it.
When using an external editor (PS CS5) to edit photos from Lightroom 3, there is an inital preference to select whether to use ACR in PS to process the raw file, or to use LR. I always want to do this in PS. There's often times where I'm compositing multiple photos. I only need to open up that raw file to quickly grab a section of it to move into another file. I don't want to save the raw file as a psd, tif or whatever, just select, copy and move that section of the file and then close it.
The problem is that preference setting is only when you first set up the Lightroom, I'm not seeing it anywhere on any of the preference menus. And for some reason, it has switched to processing the raw in Lightroom. So now i'm ending up with useless psd files. That takes up space on my hard drive, takes longer to archive on to external hard drives, and is slower to open the files into PS. It may seem like a small inconvenience, but when shooting 1000s, or 10000s of images a week it adds up quickly. And to get rid of them, i have to reveal in finder, then delete, then remove from catalog in LR - which just wastes time.
Mac Pro, dual quad-core, 16gb ram, GeFOrce 8800 GT 512mb graphics card OS X Snow Leopard
LR 3.6 5d Mk II CR2 files PS CS5 (12.0.4) and also the newest prerelease (can't disclose much on this)
LR and PS are both great in their own right, and do things better than the other in some situations, I wish Adobe would make them play nicer together.
Just installed Photoshop CS6. I deleted the default patterns and now I want to import my patterns.pat. I successfully imported it, however the patterns section is now disabled (gray). So I can't access my patterns! How can I enable the patterns again?
Twice now, upon a restart of my computer, Photoshop has reset to factory settings, and deleted all my custom brushes I've made since a particular point in time. I've had to remake some brushes for my digital art course twice, and now I'll have to do it a third time. This is EXTREMELY DISTRESSING...
This started happening only recently. I can only guess perhaps an update to Windows or something has really jerked up my Photoshop, not sure.
My Mac PS CS5.5, vs. 12.1 is behaving strange when more than one photo is open. I don't like tabs, so I've turned that off in preferences. I need to have several photos open at once, and like to spread them over the desktop to see them all at the same time. When I click on one photo, the others are behaving erratically: some are changing to show the same photo I clicked on or part of it. It's as if each window is connected. How do I turn that off or otherwise fix the problem, so that I can view each individual photo and even make changes to it, without it effecting the other open photos?
I have already tried rebooting and deleting the settings file by booting PS while holding down the command, option, and shift buttons. And I checked for updates, but looks like I have the latest.
Every time I want ro start LR5 I have to delete the preference file in C User data Roaming adobe lightroom other wise LR5 just hangs at strt up screen. This is a right royal pain as it means I have to re do my preferences in the program every time I use it ?
Due to reports of poor LR4 performance, I am afraid to upgrade. But because of my desire to use some LR4 presets, I think I want to try it. What steps do I need to take when I upgrade to preserve the option to return to LR3 if LR4 doesn't work well for my system?
BW Virtual Copies revert to Color when exported and then the BW adjustment disappears when i reopen LR.Has not happened before and i am doing a lot of BW Virtual Copies using the V shortcut, so its incredibly tedious to can back and redo each one.
When I run a preset that I made in LR3.6, the develop Basic panel reverts to the LR3 version. Clicking on "Reset" restores the LR4 version, but undoes what the preset was supposed to do, of course.
