I would like to change the default Catalogue Settings file from my C drive to a Servier drive. I am unable to find where to change it. I've found it, but cannot locate the place to change the default within Lightroom 4.
View 3 Replies
How do I import tags from another catalogue but not the develop settings of each image?
Here's whats going on:
I started with 5000 images on a hard drive. I gave a copy to someone else working on the project.
I physically moved images into real folders and edited all the shots.
She left all the images where they originally were and tagged each image.
I want to combine her tags with the edits that I've done, with the images in their new locations I've made.
I have a copy of her catalogue file.
I tried importing her catalogue into mine- which will pull her metadata tags, but only also with pulling her develop settings which resets all my work.
How can I import ONLY her metadata tags?
I can't open her catalogue and write the tags into XML sidecars because I've moved the images from where her catalogue says they are.
I realize we should have done this differently from the beginning, but with that being said- if I could import only her metadata tags then that should work. But Lightroom 4 only gives the options of importing BOTH metadata and develop settings.
After my internal HDD became full with over 30,000 DNGs, I moved all my photos along with the catalogue to my external drive. Now when I open LR, not only do I have to reimport the catalogue every time, but all my develop settings are gone! Hundreds of hours down the drain. Why has this happened, and is there any way I can retrieve them? I'm using v3.4.
View 5 Replies View RelatedI do not want to re-develop 1000+ photos in lightroom.
Cleaning up my photo directory, i started consolidating and moving folders around in my HDD. However in doing so, I also accidently removed one of the 'catalog folder' in my Lightroom (so the original photos are still there in the physical folder, but i can't see it anymore in Lightroom). Now if I try to import the folder back into Lightroom, all my developed settings are lost (i.e. everything reverts back to the original settings).
I tried using the Find Missing Photos function and the Sychronize Folder function, both does not work with my problem. Unfortunately, my catalog backup is also a week old, so that wouldn't have my recently developed settings?
Any way to retrieve the removed catalog folder with all the previously developed settings?
I am installing LR4. I tried to update the catalog.I received the message that LR encountered problems when trying to update the format of the catalog file and cannot use this catalog in this version of Lightroom. When I click on the See Adobe Technote button, I received the message that that file is unavailable from the Adobe Website. I don't want to loose all my catalog information from my previous instralling of LR2.7.
View 1 Replies View Relatedi recently updated to 5.3 and everything was great, just like normal.. then after an import of raw files, i selected one to develop and went to look for my "exposure" slider on the right side of the screen. it has disappeared??? i also am missing my simple saturation slider too. now i have an extremely indepth saturation sliders for every color. i have tried to reset tool settings, i have searched around, i even reinstalled lightroom hoping i would get it back to what i am used to...
is there a preference file that i can delete to get me back to 100% default settings?
My White Balance has managed to find a new scepia setting, and I can't get it back to "As Shot".
View 2 Replies View RelatedI want to use my Default Settings on another computer, so I need to find them and then copy them to the correct folder in the second computer.
Second question. If I also happen to apply a Preset during Import that has some of the same Develops as my Default Settings, like Lens Corrections or Sharpening, what will happen? Will the effects be cumlative/additive/doubled or will LR only apply the effect once?
I have both a Sony NEX 5 and a Sony NEX 7. I want to establish custom default settings specific to each camera and for each ISO setting I use in Lr. I know Lr has the capability to make default settings for specific camera bodies according to serial number. Sony did not include body serial numbers in the Exif files for the NEX camera line. Since I only have 1 each NEX 5 and 7, will my copy of Lr create separate custom default setting for my specific cameras so long as I don't add additional NEX 5/7 cameras to my Lr setup?
View 1 Replies View RelatedI have been using Photoshop elements for many many years and am now looking to use Lightroom as an Interface.
At the moment, I have a Folder structure on my computer. At the Top I have Photos. Under Photos I have 43 additional Folders such as ( Cindi/Ivan Pictures, Cory & Jess Pictures, Barry & Janie Pictures, etc..) Now for each of these folders, such as Cory & Jess Pictures, I have a set of folders basically broken down by month/year. Now in a Given Month/Year Folder, I have a set of folders with each one containing the pictures of a given event that occurred ( birthday, trip, etc…). Guess my initial question is how do I get these pictures into a Lightroom Catalog and do I continue to use the same Structure.
Another example - Under the Barry/Janie Pictures Folder, one of the many Folders in this Folder is called Trips. Inside the Trips folder, I have folders for every major trip that Janie & I have taken since 2004 (21 different folders) (For example there is an Isreal Folder). The Israel Folder is made up of a set of folders, for each individual event or place that we visited during our Trip - i.e. 59 different folders. How would this Trips Folder be brought into Lightroom?
Got the <Unexpected error opening catalogue> dialog when starting Lightroom 5.2. Will not allow me to save a new catalogue. Deleted old catalogue thinking that might prompt Lightroom to create a new catalogue or allow me to create and save a new one.Create Folder with New Catalogue allows me to enter a new catalogue name but then Select Catalogue dialog box is empty. Program wont open!
View 4 Replies View RelatedI'd like to move my existing LR catalog and keywords from 2.7 to my LR 5 catalog. I am using a windows PC, my mac stopped working last month.
What I want is to end up with 1 catalog with all my photos in LR 5 with all my previous edits from LR 2.7 and the keywords as well. By the way, my LR 5 has photos in it as well.
Can I import (or create) default Lightroom settings from an existing document and save them? Make them a personal default set opening with all future LR catalogs?
View 2 Replies View RelatedI removed the original file from the Preferences folder and restarted LR. When I have done this in the past LR does not give me a catalog listing and when LR opens, the panels are all in default mode. This time I see my usual catalog list, and all of the panels are as I set them. I checked the Preferences folder, and a new plist file has been created. What am I missing. I am having problems with the program, and wanted to reset the preferences in case the file was corrupted.
View 1 Replies View RelatedI have created default settings by serial number for my Canon Mark III 1ds which include enabled lens profile corrections. I then created a user preset with these default corrections. Next I imported a folder of RAW images shot with this same Canon camera with the user profile checked as part of the import. When I switch to the Develop module and check the Lens Corrections panel, I see that although it is checked for each file, the actual make, model and profile are not populated.
Is this a bug or am I overlooking something on import? I understand that in LR 4, you can apply specific lens and camera calibration profiles to camera serial numbers (noise reduction etc too).
MacPro 2.8 Ghz Quad-Core Intel Xeon with 16 gigs of ram running OSX 10.7.2.
how I can to reset all the settings back to default settings...
View 3 Replies View RelatedWhat is the default catalog location for photoshop Elements 9 and what is the filename? I have a Mac. I have searched my hard disc for filenames similar to the catalog names and could not find any.
View 1 Replies View RelatedHow can I override the default settings of Max?
Some of the changes I have to do EVERY TIME:
* Changing the home grid from 10mm to 1000mm;
* Activate angle snapping;
* Zoom out, because I model stuff bigger than 1000mm. Max thinks that I'm going to work with something with 10mm;
* To configure the Render Setup, by changing it to my personal preset;
* Pressing "J" and "F4" in the perspective view.
Another great thing would be having a default scene to work with. Like a bended white plane and pre-configured lights.
I'm working on a project where I will have to do a lot of various scaling using Bilinear resampling. Is there a way to make this the default scaling method in PS CS6 (Mac OS).
I keep on forgetting to switch the scaling method, and thus often have to scale the image twice.
im doing this for class and the book tells me to hold trl Al and shift as soon as i open photoshop. this isnt working and because im doing this for school im on a bit of a time crunch.
View 1 Replies View RelatedMy 3D camera view is acting kooky when I go into 3D mode. It's like I'm underneath the text looking up at it, and no matter what settings I mess with I can not get the view that I want. Yes I have went to all the little drop down window and clicked on default view and I still get this same underneath view. Is their a way to reset ALL default settings in PS Cs6.
View 5 Replies View RelatedI was disappointed to see that the CS6 More Options panel still has 8 bit dither. Why isn't it 10 bit by default ? Shouldn't Photoshop be sending 10 bit to monitors with 10 bit LUT for real wide gamut? Some printers are going beyond 8 bit now, also.
View 6 Replies View RelatedI need to compress about 1,000 jpg images and I'm using the "save for web" feature in Photoshop 7 but I'm running into problems because my file names are very long and its cutting them off. I found the workaround by editing the output settings and unchecking the "Mac OS" box under "Filename Compatibility".
However, the problem is that the default settings do not stay like this once I hit OK and I end up having to uncheck the Mac OS box for each and every file. Is there a way to permanently change the default settings so I can do batch processing for all my images?
when I start my Photoshop, everything resets to the default settings, from workspace to general preferences. Why does it do this and is there a way to stop it from doing it?
View 7 Replies View RelatedI was wondering how can we change the default setting of PS.
If you go to "Blending Options" in PS and click on "Outer Glow/Inner Glow/Drop Shadow/....etc" You will see that these options have already some colors as default, means Drop shadow has black color as default and inner glow and outer glow has yellow as default.
I wanted to change these default colors to something else. Like I want to change the YELLOW color of outer and inner glow to WHITE color. Is it possible?
way to simplify the "save as" procedure. I found annoying to have to select say, PNG, from a long list... Gimp remembers the last filter (... reuse sharpen?) but not the last file format and folder?
View 2 Replies View RelatedIs it possible to change the default settings of Xara Designer Pro for Units so that whenever a new file is started, it automatically uses the Default Units / Page - Pixels?
Or do I have to change it manually each time?
How can I make gimp open just like it did the very first time? All default settings.
View 1 Replies View RelatedIs it possible to change default settings? I prefer to save my work to the desktop and I prefer jpeg to png.
Can this be done in Paint.net? Where would I make these changes? If a update is downloaded, would this be saved automatically?
We're putting Paint.NET on some public computers. Is there an easy way to reset the program back to the default settings? I'm aware of the "Reset Windows Locations" option. I'm looking for a way to reset everything else back to the "out-of-the-box" settings/configuration when Paint.NET is installed.
View 4 Replies View RelatedI’m a long time Photoshop user but recently picked up LR4 to try to fine tune my workflow. I’ve noticed that after importing new files (RAW, I haven’t tried with jpg) into my library as I scroll through them (1-up, not in grid) the preview comes up and then after a second or so the WB changes to a much colder image.
Does LR4 initially preview at specific settings and then change to the individual image settings? Even if so, the final images seem very cool and I feel like I have to up the temp more than I should have to. My previous workflow was to sort in Bridge and then use ACR to import to Photoshop. I feel like I did much less tweaking of my WB this way. I feel like I’m starting from square one with LR4.
