When I run a preset that I made in LR3.6, the develop Basic panel reverts to the LR3 version. Clicking on "Reset" restores the LR4 version, but undoes what the preset was supposed to do, of course.
How can I make my LR3 presets work in LR4?
i still have the snapshots,history,and collections tab ut my presets tab is gone how do i get it back
View 1 Replies View RelatedOn both LR1.4 and LR2, the develop presets always showed along the left navigation bar (antique photo, etc.). I don't use them often, but I like to have them handy. A couple months ago they disappeared from LR2 navigation bar and I just downloaded LR3 and the develop presets are in a named folder but I can't figure out how to get them to show up on the left navigation bar again.
View 4 Replies View RelatedCan I export LR Raw Develop Presets to PS?
View 2 Replies View RelatedI am trying to reorganize my develop presets. When I go to the Library/Application Support/Adobe/Lightroom/Develo Presets/Lightroom Presets, the folder is empty. I know I have them somewhere, because I can see them in the develop module. My user presets are there, but all the defaults are missing. Are they buried within the Lightroom programme? I would love to find them in order to make things neat and tidy and be able to back up/sync with my other catalogues.
View 3 Replies View RelatedThe subject says it.
I don't use any of the develop presets that ship with Lirhgtroom. How do I delete them? They are only cluttering my panel at this point as I have many of my own. Or, can I consolidate them into one folder? I can't seem to find where LR keeps them; they aren't with my preset folders. Nor are they in Win7>users>appdata>roaming>adobe>lr
Create and apply Develop presets?
View 5 Replies View RelatedI just loaded Lightroom 4 education edition, but can't figure out why I can't see all the presets in the develop module. In fact, while I can see the various categories, I can't see any of the default presets.
View 5 Replies View RelatedI have a big concern. How can all my develop presets (more than 300 now!) be converted correctly so that the changes that one of them applied to one pic in the 2010 PV are the _same_ changes the same preset applies in the 2012 PV?
I'm not talking of Adobe LR presets (those that are installed by default and that come along with the LR itself) ... I'm quite sure Adobe has made a good job keeping them coherent with those of LR 3.x . I'm talking about of the huge numbers of largely available (on the net) presets .
I'd like to know if they will be converted _CORRECTLY_ with the 2012 PV so that they will work applying the _SAME_ _VISUAL_ changes as they did in LR 3.x .
Of course I'm available to manually edit the old presets, if necessary but how? Logically, there would not need to be a new process version if all they did was put a new UI on the same controls the old process version contained. The new controls set values for new algorithms (fill light apparently the most obvious) that don't work like the old algorithms, and can't produce the same results, but I'm pretty sure that the same visual results are still reachable somehow!
And I still need the old presets working as usually they did as a steady coherent base for my retouch workflow...
I'm finding that my presets are disappearing a few minutes after launching the program. I checked and have installed my presets in the proper folder where it would look for them. I see them when I grab the handle on the left and everything drags up or down. But I begin to two finger drag up and down, the handle on the left stays put and the presets drag up out of sight and a large, blank gap appears below. I've also had it where the presets have disappeared and have had to relaunch LR5 to get them back.
View 4 Replies View RelatedThe "My Mixology" is not Showing up in my import or develop Presets of LR3. Do I have to download this?
View 3 Replies View RelatedIs there a way to apply develop presets when you synchronize a folder? I want the new images that are synchronized to have a develop preset applied.
View 4 Replies View RelatedOSX 10.7.4 LR 4.1
In the Develop module, my presets section is missing.
Not missing presets.
The whole section is missing.The order of things is:
Navigator
Snapshots
History
Collections
setting up presets for making adjustments to more than one image, I keep hearing about doing that by way of the "quick develop" panel, but I don't like that panel... its a bit too basic or something... I don't like making settings where I can't see a bit more about what I'm doing.
Is there a way to create presets when in the Develope mode? I don't see any clues on the the basic panel, but hopefully I'm missing something. Is there not a way to record the settings I've made inside the basic panel into a preset?
I finally installed lightroom 3 after many, many months of it sitting on my desk. I have been watching tutorials, and playing around with it, and I have found that the default presets are only on the right side panel in library. On the left panel in develop the heading presets shows up but when I click on the triangle nothing shows up under them. I did see a question already on here to right click on the heading and check it which I did a few times just to see if it would work and nothing.
View 5 Replies View RelatedCan add the "keywording" panel in the Develop tab?
In my workflow, I rate or tag a photo only after I've made some PP adjustment. So, my workflow would flow better if the "keywording" tab resided in the Development tab as well. Is this possible? Can you add a panel from another tab?
I'm using macs running mountain lion. I've updated two computers to Lightroom 4.2. One shows the new form for the basic panel of the develop module, e.g., including the brightness slider. The other installation reverted to the Lightroom 3 panel, and I can't find a preference that affects this.
View 2 Replies View RelatedI want to take advantage of a FULL SCREEN to see my images.However, the panel with all the controls takes up about 1/6 of the real estate.I know the panel can be auto hidden, but I hate that workflow.
I would love to put the panel on a separate monitor leaving just the image full screen on the other.
I have been using LR for ages at work and recently got offered a free full version of LR 4 by Amazon Vine programme. I happily installed it on my laptop and imported my presets which I mostly created myself.I was shocked to find that they look completely different on LR 4 (last version I used was 3.4) and found out that this is due to the new process version.
I have to tweak a LOT and still am not satisfied with the results. The main problem seems to be that ALL photos start with a linear curve, no matter which custom curve the preset contains. Is this a bug or a feature?It is really getting on my nerves and I am considering to go back to good old LR 3 again. Questions I have:
1. Could this problem be due to the fact that I did not to an upgrade but installed a completely new version of LR3?
2. Whenever I google I find the hint that there should be a dialog menue like this URL... this dialog never appears on my LR version. Or it did for the first time and I clicked "Don't show again" - I can not remember If I did chose to not show it again - can I redo it? Maybe it would make the tweaking easier if I had a preview which I absolutely don't have on my LR version.
I just purchased Lightroom 5.2 and am trying to edit without success. In the Develop panel, I can see and use any of the edit adjustments/sliders on the right. The edits are visible in the small photo in the filmstrip area at the bottom of the page but no changes occur to the main screen image as they are applied. Behavior is the same regardless of file type (.jpg or .NEF).
The photos will accept edits in the Library panel (quick edits) and apply/display them to the main screen image.
I am using Lightroom 5. In the Develop mode, is there a way to add a metadata item to a panel. I shoot with several cameras and the way I process an image depends on the camera I used. I would like to add the "Camera Model" to the Histogram panel just under the ISO, Lens length, f stop, and shutter speed. Now I must flip back and forth between Library and Develop to get the information.
View 2 Replies View Relatedwhere is the basic panel in the develop module. I have non!!
View 2 Replies View RelatedI recenlty upgraded from Lightroom 3 to Lightroom 5.3 with no problems. However, now after 3 weeks of use, my entire 'basic' panel in Develop has disappeared. I no longer have Wb tool, or any sliders for temp, tint, exposure, black, white, shadows, clarity, etc. If I am going to lose a panel, I don't want it to be this one!
View 6 Replies View RelatedCannot open basic panel while in the develop module.
View 1 Replies View RelatedThe quick develop panel in the library tab is all grayed out and I am unable to make quick changes without being in the develop tab.All images are canon raw. I've never had this happen in lr3 or lr4. Is there a setting I am missing?
View 1 Replies View RelatedI was really hoping that the Quick Develop panel in the Library Module which I sometimes use if there are minor touchups needed to a photo would have been redesigned to more closely resemble and work like the Basic panel in the Develop Module. Certainly sliders instead of those arrow buttons would be a very useful change.
Why this wasn't changed?
I was editing a photo in Lightroom 5 the other day, and I thought I hit something, but all of a sudden the basic panel was missing. Suggestion was to right click on one of the panels and it should have an option that says basic, in order to get the basic panel back. That is what I did, but what it does is just opens and closes the panels. I don't know how to get my basic panel back.
View 3 Replies View RelatedThe Basic Panel disappeared from the Develop Module. I was processing photos. When i went to a new photo to process, the Basic Panedl disappeared.
View 5 Replies View RelatedI just updated Lightroom to version 3.4 and now I can not find the folders panel in the Develop module. It's in the Library module but not in the Develop module. There is not even a right click option for a folders panel under the Develop module. What happened???
View 3 Replies View RelatedIn LR 4.1 Develop Module the Basic Panel suddenly disappeared. Why? How do I get it back?
View 2 Replies View Related4.1 download was successful but when i open up the application the develop interface is still lightroom 3. What do i need to do to get the new interface?
View 2 Replies View Related