I did a series of shots with an incorrect EV setting ( Exposure compensation) so I used Lightroom 4.3 to modify the exposure on these jpeg files. I then exported the modified images, and found that the file size was only 50% of the original.
View 8 Replies
I have been experiencing crashes with PS 13.0.1 running on Mountain Lion. I use Portrait Professional Plugin version 2 bundles with PP 10.8.
View 7 Replies View RelatedI just ran some file synchronisation software and it reported that a JPEG file had been changed on my C drive. I didn't remember changing it so checked. I have a trial version of Photoshop CS6. It seems that if a JPEG is opened into Camera RAW and then opened into Photoshop, then Windows reports it as modified, even if no changes were made.
My question is does this behaviour result in the image being resaved with a loss of quality each time that it is opened this way?
Why are my photos not saving as JPEG files? When I select JPEG, they save in my folder as Photoshop files which I cannot email and most people cannot open on their computers.
View 4 Replies View RelatedI try to save a few files in JPEG format in batches:
1. First, under Action, I open a file and include what functions to perform
2. then I save it in JPEG format which prompted a dialog box that asked for quality.
3. after I'm done creating the Action, I run the Action in batch mode.
But for each file, Photoshop generates that JPEG save dialog box for quality. this means that I have to click or press enter for every single file even while Photoshop is processing in batches!
So how do I supress that dialog box when running in batch mode and let photoshop save everything in JPEG format without pausing and at the quality I have determined when I created the Action?
I'm using Photoshop 7.01 on windows
Using CS5.5 / Win7 x64.
We do a lot of stuff using smart objects - replacing logos etc. Load the template image, swap the logo, save a new PSD file with the new logo on it in case we need it again, then save a jpeg for the client.
Oddly (and I think this has only started to happen since I've been working at home and saving onto a local drive on a laptop, rather than onto a server) the new PSD has today's date as its Date Modified, but the jpeg doesn't - it seems to use the original image's created date instead, which might be a few years ago in the case of some of the images. So when I'm attaching files to an email to send to the client, all the jpegs I want are all over the folder, instead of at the top with their associated PS files (sorted by date, newest first).
I scanned, as a tiff file, a full-center spread of a large newspaper. This had to be scanned in eight sections, the pages were so big on my A4 scanner window. When I joined all the sections up in Photoshop CS5, the size of the file was huge (about 21 inches by about 19 inches) It is also digitally large (about 320 MB, since the resolution is 300 dpi).
Because I want to keep the composite photo but don't want the file to be so digitally large, yet need the good resolution, I thought it would be a good to save it as a JPEG file, which would give me the dimensions I need but not be so digitally bulky as the original. On pressing the drop-down menu for Saving As, the JPEG option did not appear in the dialogue box. Why is this, and how may I save the file in JPEG format?
Programme: X4
System: Windows 7 Ultimute 64bit
Installed 01/01/2012 with SP1.
Problem: When I save jpeg files some of them become corrupt and will not open.
I have been using PSP for a number of years and decided to upgrade to X4, now a number of the files that I save in PSP are becoming corrupted and they seem to all be photos which are shot using a pure white background, not all photos are affected, I never had this problem in my previous versions of PSP
I use adobe lightroom which I transfer my raw file into jpeg, this is where i then open the jpeg in X4 and do my main editing, it is when I save the image it saves corrupted and can not be opened or deleted (shows that X4 is still using the file) . it will also not allow me to re transfer the image from my catalog.
There are some good features and I am considering uninstalling and reverting back to my older program (X2).
This may be an issue with the metadata of the image, I exported 2 sets of 50 identical images 50 with and 50 without the Metadata and ran a script which then automatically save the image, about 20 of the images with the metadata ended up corrupted, all the images without the metadata saved fine.
I suddenly got problems with saving files in .jpeg format. I use camera raw in my camera, and edit photos in Element, and then save a .jpeg version of the photo, and until recently that operation has went on without problems, but suddenly I got no other alternatives than .psd. Why?
View 2 Replies View RelatedI am adjusting colours on photos with Photo Paint X6. When I try to save with original settings the OK button in the "Export to JPEG" dialog box is grayed out. There are no error messages or hints on the screen as to what to do to proceed with the save JPEG with orginal settings.
View 7 Replies View RelatedA way to save modified DVD menu layouts in X4 ? In X3 we could save a DVD menu template after it was modified, but I can't seem to find the same option in X4.
View 1 Replies View RelatedI recently upgradedfrom "Elements 2" to Version 11. I previously saved all my edited work in JPEG format and to the "My Pictures" folder. I was then able to open all modified photos and share them with another computer without resorting to any specialised program. I wish to continue to do the same using Version 11. Having made several attempts without success to save modified photos using my well tried and successful method and having read the Manual to see why the process is not successful with Version 11 I am now exteremely frustrated. Each attempt to save a modified photo results in a Thumbnail icon being loaded into the "My Pictures" folder with the elements 11 logo. I then are only able to open the photo (which incidently does not carry the modified file name from the original) by way of the elements 11 program.
View 8 Replies View RelatedIn a nut shell if I use lightroom 3 only and print images the printed images look exactly the same to the monitor - therefore I would assume the calbration of the screen is okay.
If I use lightroom 3 and export to CS5 to continue making more adjustments when I save the image as jpeg it appears to have saved okay. However if you then maximise the photo to full screen the colours change - drastically. Basically they look aweful. They become quite dull and lose there saturation adjustments (which were done orginally in Lightroom). They print this way too.
I don't think it has anything to do with calibration because it's all okay when just using LR3.
I have played around with this quite a bit to try and find a solution and have now found that if I export lightroom to CS5 and don't make any changes to the photos but just save it - it's still changing the colours
I am not exporting from lightroom to CS5. All I am doing is selecting the Right clicking and selecting Edit in>Adobe Photoshop CS5.1....
Then in CS5 it opens and appears exactly the same as it was in LR From there I click file>save as>format Jpeg and there is another box checked labelled - ICC Profile: Prophoto RGB (not really sure what this is and there are no other options to change it)
I have tried to show a difference in colour by attaching the photo.
Picture on right is Lightroom edited. Those colours are what you see when it is maximised on screen and the colours print correctly too . This photo was then opened in CS5 (photo on left) (with the LR adjustments) and saved as jpeg and you can see how the colours change. But you don't see the change unless screen is fully maximised - and it prints that way too.
I have been trying to save images from one file to a final modified one. Two problems:
1) Some images are unedited and save sometimes but not always. Why?
2) Some are a combination of an original plus a transformed close-up from another image. When the finished edited image saves, it is much smaller than the few unedited images that did successfully save. Why?
The images are digital photos of my jewelry. In order to decrease the number of pages on my impending website, I am attempting to transfer, when one is available, a resized close-up to the other shot of the full set (close-ups are what sell the work!). Some of the images show 25% on the top bar but that doesn't seem to make a difference as to whether it will save or not. Others (I notice they seem to be more horizontal images) are 16.7% ? I tried to upload example images to illustrate what I am trying to do but kept getting an error message.
After editing parameters in an Inventor Assembly Template, how do I save that assembly and all related parts
with different names while keeping their associativity to one another?
I've set up iphoto to open photos directly into elements 11 editor. After making changes, how can I save the images (orginal and modified) back into iphoto?
View 1 Replies View RelatedI am using LR 4.3. I added keywords to my pictures. Some keywords got synonyms. I also checked "export synonyms" in the keyword options. When pressing Strg-S to save meta date into the files (all JPEG) all keywords are stored but without synonyms. When doing a normal export then synonyms are saved directly in the JPEG.
Is there a way to save the synonyms also with Strg-S or do I have to export all pictures and re-import them into LR? To be honest that would be not what I expect from a good software.
Deleting files and saving files brings up an error message. Files can't be deleted from lightroom which makes editing a nightmare. Also Saving Files (raw of jpeg), brings up an error message everytime.
View 1 Replies View RelatedI downloaded the free trial of the VideoStudio Pro X4 a month ago and was so impressed that I went out and bought it! Then, after downloading SP!, it encountered a problem and stopped working. It was just a matter of restarting the application but it happened more and more over the weekend, meaning I lost work which I hadn’t saved. So I decided to uninstall the free trial version and install from the disk and it worked fine for a while but I then got a problem with my security program. Not sure whether it was due to the Corel installation or just coincidence.I did a system restore to fix the problem with the security program and since then I have been unable to access VideoStudio and get the message: Error 4: Corel VideoStudio files have been damaged or modified. Please reinstall your original source. But when I try I get the message: “Setup.xml could not be loaded. This may indicate that the file is corrupt”.
View 4 Replies View RelatedSupose I would like to convert my RAW files to JPEG (not export them!) in Lightroom, so that the RAW files would get replaced by the JPEG files, but keeping the whole history of adjustments once made to the RAW files on the develop panel.
View 2 Replies View RelatedI am transitioning to using RAW files more often. I add metadata, including GPS info, captions etc. Then invariably I need to get JPEGs to someone and have to go through the hassle of exporting the RAW as a JPEG with the metadata.
Is there a way I can get that metadata into the sorta sidecar JPEG file on my Mac without having to go through the export process?
I suppose I could designate the preference that on import the RAW and JPEG were treated as separate files; could I then just copy the metadata in? I haven't really worked with separate JPEG+RAW before. Would it happen automatically if I stacked them? Haven't really explored that.
It just seems that every time I have decided to use the RAW invariably I need the JPEG and if I don't have LR available (say I'm working on someone else's computer but accessing my own files)
RAW to JPEG and RAW files go missing?
I Have started to use Lightroom 4 and importing RAW files into lightroom. To this point its fine, then i export them to Jpeg, again to this point it is fine. NOW !!! when i go back to the location i picked up the RAW files from, thet are not there, have they been saved into another location? or have they been over written?
How do you convert several cr2 files to jpegs in lightroom?
View 3 Replies View RelatedWhy can't my Lightroom read my (jpeg) files now that I have reloaded it onto a new imac hard drive?
View 4 Replies View RelatedDoes Lightroom allow you to convert cr2 files to JPEG? If so how do you do this? are othere adobe products able to accomplish this as well?
View 1 Replies View Relatedhave edited all my wedding photos in Lightroom 3. how to change my NEF files to JPEG.
View 3 Replies View RelatedI just recently shot a session in raw (also new to that) to expand my editing process. I downloaded them to my laptop, edited them, and exported as a jpeg file. When I went to move the edits to my terabyte the files copied over as "untitled CR2 files". I don't know how to get them back as a jpeg.
View 2 Replies View RelatedI have not had any problems until I started trying to use a green screen, which has turned out to be a major pain. Ultra key did a good job, but I kept being told the after affects does a better job. My computer is a PC has 32 Gigs of ram a 4 gig video card, I7. I also just downloaded all the latest updates. I imported an AVCHD file after shooting a 30 min lesson on green screen. Had to do a lot of editing to get all put together so there were lots of cuts and I had alot nested sections so I can resize myself with the background to keep the perspective correct. After I had decent success with keying, though I wish it were better, I tried moving each indivdual video clip over to after effects to key in there. It looked like it might have been a little bit better than the using ultrakey.
Anyways, after taking forever to get all these clip edited in after affects, I wanted to export my completed video so I could see how well it worked. I never got the the chance because no matter what I choose under MPG2 it would lock up around 8%. Even when I tried to get to encode a 2min section of the video, it still locks up. The only way to get out of the program is to force it closed. As I searched for answer to this problem, someone suggested holding he shift key down while you open CS6, but that did not work. BTW the same file exports fine as long as I do not send any of the footage to after effect
it would be nice to be able to try and use after affects as well so I can at least see if the final result of the keying is better or not.
Suddenly, after 3 months of easy use, LR5 says it can't import standard JPEG files form my Olympus OMD
because it can't read them. But iphoto has no problem and imports them easily. This just started happening out of the blue.
When I make changes to my jpeg or psd files in Lightroom 4.3, these changes are not displayed in Bridge.
I'v checked the appropriate box in Lightroom's Catalog
Settings "Auotmatically write changes to XMP".
What am I doing that's incorrect?
Digitalmac.
some time ago (and I cannot connect it to some specific action from my side) I'm facing an unpleasant fenomena: when I'm processing a CR2 (Canon RAW) file and exporting the result to the hard disk as JPEG, the resulting JPEG file looks completely burned out ... but only if viewed in the Lightroom. If I view it for example, in a browser, or with the FastStone viewer, or whatever -- it looks perfectly normal.
View 8 Replies View Related
