Photoshop :: CS6 - Modified JPEG On C Drive
Jan 1, 2013
I just ran some file synchronisation software and it reported that a JPEG file had been changed on my C drive. I didn't remember changing it so checked. I have a trial version of Photoshop CS6. It seems that if a JPEG is opened into Camera RAW and then opened into Photoshop, then Windows reports it as modified, even if no changes were made.
Â
My question is does this behaviour result in the image being resaved with a loss of quality each time that it is opened this way?
View 7 Replies
ADVERTISEMENT
Dec 12, 2012
Using CS5.5 / Win7 x64.
Â
We do a lot of stuff using smart objects - replacing logos etc. Load the template image, swap the logo, save a new PSD file with the new logo on it in case we need it again, then save a jpeg for the client.
Â
Oddly (and I think this has only started to happen since I've been working at home and saving onto a local drive on a laptop, rather than onto a server) the new PSD has today's date as its Date Modified, but the jpeg doesn't - it seems to use the original image's created date instead, which might be a few years ago in the case of some of the images. So when I'm attaching files to an email to send to the client, all the jpegs I want are all over the folder, instead of at the top with their associated PS files (sorted by date, newest first).
View 1 Replies
View Related
May 13, 2013
I did a series of shots with an incorrect EV setting ( Exposure compensation) so I used Lightroom 4.3 to modify the exposure on these jpeg files. I then exported the modified images, and found that the file size was only 50% of the original.
View 8 Replies
View Related
Dec 14, 2013
I want to put type on a perfect circular path.But first I need to stretch the type so it is longer vertically.Stretching type and using it as normal is easy.But how in the world do I use the stretched type on a path?
View 2 Replies
View Related
Jul 10, 2012
In LR3, when exporting a raw file as a jpeg the only choices given at the top of the dialog box are Hard Drive and CD. Is there a way to export directly to a thumb drive or external HD without exporting to the HD then copying the file (s) over?
View 1 Replies
View Related
Aug 10, 2012
1) I'm unable to designate an internal drive as a scratch disc (non boot drive). Drive is clean, empty, I've chkdsk'd, permissions set to full, I can read and write files on it, and I'm able to designate it as scratch for Illustrator but PS6 doesn't like it. Says I don't have access.
Â
2) I upgraded to PS6 extended (cloud) and after a week it now hangs during startup at loading Nik Color Efex Pro 4 plugin. Hangs for about 3 minutes before continuing.
View 2 Replies
View Related
Jan 6, 2014
Using Elements 11 - My photos are taking over my hard-drive and I want to safely transfer all my photos and videos to an external hard-drive. How do I do it without loosing info and/or later having to re-connect thousands of pictures?
View 1 Replies
View Related
Feb 10, 2014
PSE11 transferred data from hard drive to external drive how do i direct PSE11 to new drive/catalog
View 2 Replies
View Related
Jun 18, 2012
Is Photoshop able to determine whether a particular image has previously been modified in some way? Or are there other pieces of software that allow you to do that?
View 7 Replies
View Related
Aug 7, 2012
I was trying to create a PDF with some modified TIFFs. The TIFFs were opened, manipulated and flattened in Photoshop to reduce file size. I then took a few TIFFs and tried to create a new PDF. When the PDF was created I zoomed into one of the pages.
Noticed that the Photoshop editing has shown thru (all of the good and removed editing). It was like all of the Photoshop editing had come thru, all though I had flattened the image at its final output.
Â
I then tried to create another PDF. I took the flattened TIFF images and saved them as PDFs in Photoshop. This worked. However, the file size was super huge. The 'reduce file size' destroyed the clarity of the pictures.
Â
Is there a way to create a PDF from flattened TIFFs without all of the Photoshop edits to come along?
Â
Acrobat 10
Photoshop CS5
Windows 7 HP x64
View 8 Replies
View Related
Sep 25, 2004
I have a little problem. When the *.psd is transformed into *.HTML, for example, you may find an image on the HTML page acting as a button labeled as "Link1". and this image has the name templ_30.jpg. To change the text "link1" into, let we say, "Home", I have to reload the whole of the *.psd into ImageReady then go to the text layer which holds the word Link1 the change it into Home and finally do save optimized as again. By this I have got the image templ_30.jpg but with the word Home instead Link1.
What I want to ask, How can I just change the templ_30.jpg only or by other word How can I get a single image from the *.psd template where this image is an image of the HTML page produced by ImageReady.
View 1 Replies
View Related
Jul 6, 2009
i have an already existing selection. i would like to add to it. once i have drawn the new additional selection and selected the ADD TO SELECTION command how do i apply it?
View 1 Replies
View Related
Nov 15, 2012
I have Photoshop CS5 installed on my C drive. I recently bought an external terra drive and want to move Photoshop to the terra drive, as the C drive is pretty full and it's effecting PS's functionality. Do I have to uninstall and then reinstall on the external drive?
View 6 Replies
View Related
Aug 18, 2005
i duplicated a layer, and made the original layer invisible. i cropped the duplicated layer, and it's weird, the original layer also gets cropped. why is this isso? the duplicated layer is the one active, any ideas?i know this isn't supposed to happen, right?
View 1 Replies
View Related
Jan 27, 2013
I recently upgradedfrom "Elements 2" to Version 11. I previously saved all my edited work in JPEG format and to the "My Pictures" folder. I was then able to open all modified photos and share them with another computer without resorting to any specialised program. I wish to continue to do the same using Version 11. Having made several attempts without success to save modified photos using my well tried and successful method and having read the Manual to see why the process is not successful with Version 11 I am now exteremely frustrated. Each attempt to save a modified photo results in a Thumbnail icon being loaded into the "My Pictures" folder with the elements 11 logo. I then are only able to open the photo (which incidently does not carry the modified file name from the original) by way of the elements 11 program.Â
View 8 Replies
View Related
Jul 30, 2012
While changing the media drive in Smoke setup via commenting out the current drive isn't a complicated process, I personally would find a more streamlined option useful. Something on the startup screen would be great: select project, user, media drive. When using FW800 drives, I typically try to have a discreet project drive that has everything on there for the current project. With the larger Thunderbolt raids, I am going back a little to the old system of having active storage and archive storage. However, when thunderbolt prices come down, I'll most likely have a separate drive for each project again.
View 1 Replies
View Related
Mar 1, 2012
I moved images from my harddrive to an external drive.
I opened Lightroom.
Noticed there was a question mark by the photo folder I needed.
I synchronized the folders. Nada.
I rememebered I moved the images (first line ^^)
I re-imported the images from the external drive into Lightroom.
These images (other than one that was marked previously with a blue label) look completely untouched - completely original files - even though I spent hours working on them.
I am glad the images weren't deleted BUT re-doing 600 images will be a MAJOR FAIL if I can't figure out how to import the images with the settings / developments I did beforehand.
View 5 Replies
View Related
Aug 18, 2013
I have about 900 raw files on an external drive. I edited those files using my master catalog using a laptop while still travelling. When I got home, I copied the master catalog from the external drive to the desk top, then opened the master catalog on my desktop. I can see the edited images on the external drive. So far so good.
Â
I want to copy (add) the edited images to my desk top. I tried to export the images as a new catalog and then import it into the desire location on my desktop drive. However, LR5 does not allow that. I get this message: "There is nothing new in the catalog you have selected. All of the catalog's photos are up to date in this catalog." Yes, but the edited images are not on my desktop.....
Â
I also tried to Import from the external drive and then Copy the files to the desktop, but then I lose all of the work done in the develop module and the keywords.
Â
I watched Kost's LR 3 video on merging catalogs, but she dodges the question of how to deal with this issue since the "merge" is within the same catalog.I'm using LR5 with Windows 7.
View 4 Replies
View Related
Jul 5, 2012
I'm copying RAW files from a shoot onto my network RAID drive in a per-album folder, from where I then import into a new LR catalog (I'm using LR 4.1) on my Windows laptop for that album.
Â
I'm finding that editing RAW files on a network drive from a wireless laptop is awfully slow (not to mention not being able to continue the work offline somewhere else), so I'd like to cache those files on my speedy SSD drive just until I'm done editing and exporting/publishing that album.
Â
I back up my per-album catalog onto the network folder alongside the RAW files since that's my IT-managed master repository. When I'm done editing, I'd purge the cached files and just keep the catalog previews on my limited capacity SSD.
Â
So, is there a way to tell LR to, for one/all files imported from a location (in my case a network folder), look in an alternate location for the identical files? Since I create per-album catalogs in per-album folders, there wouldn't be filename clashing. Either LR can provide this caching behavior on its own or I'd manually copy files from the network folder to a local folder and tell LR to look there first.
Â
I don't really want to make copies of files into secondary folders within LR since then it's a hassle to merge edits on the cached copy to its master copy (I haven't done this, but I'd imagine so).
View 4 Replies
View Related
May 21, 2013
How can I move my Lightroom 4 catalog (data, not photos) from my local drive to an external drive? My local drive is running out of space.
View 3 Replies
View Related
Dec 21, 2012
Photoshop CS5.1
Â
When I click on Open File, the window that comes up has several default columns (FileName, Date, Size, etc).
Â
I can right-click on the tab bar and add "Date Modified" to the tabs, but I would like to have "Date Modified" be a default column whenever I open the file selector (and no matter which folder I open up).
Â
I cannot find a way to do this. I want to know the last date I modified a file, not when it was created.
Â
Is there a way to universally set this column as a default?
View 1 Replies
View Related
Feb 16, 2012
I have been trying to save images from one file to a final modified one. Two problems:Â
1) Some images are unedited and save sometimes but not always. Why?  Â
2) Some are a combination of an original plus a transformed close-up from another image. When the finished edited image saves, it is much smaller than the few unedited images that did successfully save. Why?
Â
The images are digital photos of my jewelry. In order to decrease the number of pages on my impending website, I am attempting to transfer, when one is available, a resized close-up to the other shot of the full set (close-ups are what sell the work!). Some of the images show 25% on the top bar but that doesn't seem to make a difference as to whether it will save or not. Others (I notice they seem to be more horizontal images) are 16.7% ? I tried to upload example images to illustrate what I am trying to do but kept getting an error message.Â
View 21 Replies
View Related
Oct 8, 2012
I have been experiencing crashes with PS 13.0.1 running on Mountain Lion. I use Portrait Professional Plugin version 2 bundles with PP 10.8.
View 7 Replies
View Related
Feb 16, 2012
Any pic I mod with CS4 or CS5 no longer displays on my digital picture frame!
The originals display fine.Modified ones are rejected as an unsupported format.
View 2 Replies
View Related
Nov 13, 2012
I've set up iphoto to open photos directly into elements 11 editor. After making changes, how can I save the images (orginal and modified) back into iphoto?
View 1 Replies
View Related
Dec 26, 2013
I have my LR library and catalog on an external hard drive. I have a new iMac with a 3TB hard drive and I want to move the library and catalog from the external drive to the computer's hard drive. Is this something that can be done with a drag and drop?
View 2 Replies
View Related
Mar 5, 2012
I transferred my LR3 files from my WD hard drive to my new Lacie Thunderbolt drive and now I can only get the preview and it says the file is missing. Is there a setting I need to change that I am not aware of?
View 2 Replies
View Related
Sep 25, 2013
I am not changing anything in my system. I am using windows 7 and will continue to. No change in elements version (10). how to move my pictures from my computer hard drive to an external hard drive (this will NOT be a back up) but the primary locaton for my pictures. I will keep elements program on my computer and when I want to work on my pictures or download more pictures from my camera I will connect to the external hard drive.Â
View 10 Replies
View Related
Jan 11, 2014
How does moving files off my C drive affect Lightroom's ability to find them? I have flagged and labeled files - will they still be flagged and labeled? Will I have to import them again?
View 8 Replies
View Related
Dec 3, 2012
I have photos stored on a external hard drive, over time the computer changes the drive letter ie from "G" to "I" Lightroom there for is unable to see all the photos in drive G which is in fact the same drive.
View 1 Replies
View Related
Apr 24, 2013
I got this workflow,
1) From LR export to PS
2) Do all essential editings.
3) Save. File become 'xyz.tiff' now. (I want to keep this as master copy)
4) Crop to 4r, Save a Jpeg copy as 'xyz 4r.jpg'
5) PS save it as a copy, but do not automatically open the Jpeg copy. The tiff remains opened. I have to manullay Open, browse to it, and open the Jpeg. The 'Open Recent' list also do not list 'xyz 4r.jpg'.
6) Do 4r sharpening for the 'xyz 4r.jpg', save it.
Â
Basically the files I want to keep and worked on is like this: NEF -> xyz.tiff -> xyz 4r.jpg -> xyz sml.jpg(maybe)
Â
Now, it there a way in step (5) to have PS save the JPEG copy, and automatically open it? I don't care if the Tiff copy remains opened or not, I am done with it.
View 9 Replies
View Related
