Lightroom :: Can't Read (JPEG) Files
Nov 5, 2012Why can't my Lightroom read my (jpeg) files now that I have reloaded it onto a new imac hard drive?
View 4 RepliesWhy can't my Lightroom read my (jpeg) files now that I have reloaded it onto a new imac hard drive?
View 4 RepliesMy daughter in law who is Vietnamese took some photo's and downloaded the Jpeg files onto my pen drive.
When I transferred these files to my hard in the UK, I found that the photo's would not open. Looking at the properties, it showed every Jpeg photo was in in "Read only format" and contained 0 bytes. The hole folder contained 544 M bytes of photo's. I then deleted the shaded out part of the "Read only" file and pressed OK, but this did not allow the file to be read.
I then tried to open the photo's in Paint Shop X4 and this was a success.
A few days later I tried to re access the Jpeg photo's and again, but I cannot open the Jpeg files with or without X4. (working with Widows Home Premium)
I have been playing around with the exporting options to a JPEG file (such as low sharpening, high sharpening, etc.). However I did not track what I was doing diligently as I assumed I could "read" it later. For example, a particular picture has 4 exports several minutes apart. I can line up each export based on exported name and time stamp. But I can't tell what options I selected during the exporting process. Is there a way to find out what export options I selected for a particular export? No other develop changes were made, just playing around with the export options.
View 1 Replies View RelatedThis message comes up when I try to import to light room. A box comes up that says "Import Results" then the error message shows with a group of file numbers that wouldn't import.
View 1 Replies View RelatedI am having problems all of a sudden importing my RAW files into Lightroom. I have been doing nothing different and have been using the same equipment.It just says that it can't read the files.
View 1 Replies View RelatedI just bought the new D600 from Nikon. Great camera. Only problem is that my Lightroom 3 will not read the raw files?
View 1 Replies View RelatedI just bought the Olympus pen 5 camera and my current version 3 won't read the raw file ( orf) i can convert using dng converter but that is a pain and added steps. IF 5.2 recognizes orf directly in lightroom?
View 2 Replies View RelatedRecently I upgraded to Mountain Lion and now cannot upload photos into LR 4.3 unless I first upload them into my labtop that has LR 3, then export as a Cataloge .
View 7 Replies View RelatedI recently upgraded from a mac mini to a macbook pro retina using migration assistant and time machine backup. All went well, and since all my photos were on an external drive, no problems there. However, when I try to import new photos, I see the images, but then get a list of the .CR2 files and an error message of "unable to read files." This is a Sandisk Extreme 16 GB SD card, and it still successfully works on the old mac. Following a similar issue in the forum, I checked permissions, and those appear to all be correct. I'm running LR 4.4.
View 1 Replies View RelatedI get a "could not be read" msg while trying to import NEF files to my new iMac. Running 10.7.4 and LR4.1, Camera Raw 7. It doesn't happen every time. To date, the only solution is to restart my computer and then I'm able to import the image files.
View 4 Replies View RelatedI just got LR 4.1 But it wont read my RAW files from my nikon D800 what can I do? (this is for mac)
View 3 Replies View RelatedLR3 wont read NEF files from my new D4 LR3 is updated
View 1 Replies View RelatedI tried to import files for the first time and LR 4.3 said they can't be read. I've already had difficulty with the install not working on my user account so I had to set up a new one for LR to work and now this.
View 11 Replies View RelatedLightroom will not read Nikon D800 NEF files. I have updated lightroom twice, first to 4.1 and second to 4.2 and in neither case would the files import. I have read several forum entries that say these files are compatible with Lightroom and/or to update Lightroom.
View 15 Replies View RelatedI'm now getting the error message: "The following files were not imported because they could not be read (189)." Not sure why this would appear after years of successfully importing.
View 7 Replies View Relatedjust got a new Sony A77 but Lightroom v2 won't read RAW files when I try to import them. I know I need to upgrade my version of LR (I will be going to v4) but... is there ANYTHING else I need to do or to upgrade in order to ensure Lightroom 4 will read those Sony RAW files?
View 8 Replies View RelatedFirst time I have gotten this error while attempting to import.
View 2 Replies View RelatedI am doing some editing work for a magazine. The lead editor had issues with adobe camera raw viewing some of my edits. The xmp files are there but for some reason they are not loading. We narrowed it down to just the Nikon D4 files. I just had her download a trial version of LR4 and we are getting the same issue. The xmp's are there in the same folder as the .nef files. Import into Lightroom, and all D4 files do not show my edits.
We are both running Lightroom 4.3, Camera Raw 7.3.
I'm going to buy LR4. There are some old ircat files and catalogues created by LR 1.4 version. I wonder if it is possible to read these old catalogues by LR4?
View 7 Replies View RelatedAny download exists for Lightroom 3 to read Nikon D-800 raw files?
View 4 Replies View RelatedI have on my Pc Lightroom 3.6 . I cannot read files NEF from Nikon D 800. Is there any possibility for reading these files with my version of LR?
View 3 Replies View RelatedLR has been working fine and now nothing. NEF files will not import on my Mac.
View 1 Replies View RelatedI can't get Lightroom3.4.1 to read Samsung's raw files. in sRGB or adobeRGB. This is the new NX 200. But since it is supposed to support NX100, one would think NX 200 should be the same format. The samsung converter makes for a clumsy workflow.
View 7 Replies View RelatedI installed a lightroom 4.2 and i was about to import my pictures but lightroom cant read my files in my computer. It can read files but those files are from years ago. I wonder why my recent files cant read. I dont know what to do. I already reinstalled it but then again its still the same. I dont think it was on the installing the lightroom but i am suspecting that it has something to do with the catalog?
View 1 Replies View RelatedI just installed Lr4 on my laptop. When I plug in my Nikon D7000 and try to import photos, I just get a message "The following files could not be imported because they could not be read". Then it lists the file names of the various files. Message displays regardless if I try .NEF or .JPEG files. The photos appear in the library module, so I know Lr is pulling them from the correct place (camera). When I plug the camera into my desktop PC where I also have Lr installed, all works fine.
View 1 Replies View RelatedI have used Lightroom for awhile and now I cant import any images. I recently got a new camera (D600) and thought that that was the problem but i cant get any images to import. Even form my D7000. I have checked my disc permissions and updated everything i can. What am I missing? I keep receiving an error message 535 files cannot be read. I am however able to import images onto my desktop and into Apeture....
View 4 Replies View RelatedI bought a Nikon D600 but am unable read the NEF files read with my version of Lightroom 3 that runs on an older Mac Book which cannot be upgraded to LR4. If I buy a new Mac, can I upgrade to LR4 on the new machine or do I have to purchase a new version? If I can upgrade how do I transfer LR3 to the new machine. Also, I have a student version of Photoshop CS5 Extended. Can I purchase an upgrade to CS6 on a new machine?
In doing research I saw where both Lightroom 4 and Photoshop CS6 had some problems with Apple's OS X 10.8. Have these been resolved yet?
I'm using 5.3 with OS 10.8.5. Out of the blue I cannot import photos. I've experienced two things: at first the application would seemingly hang-up indefinitely as if were going to import, but nothing happened. I tried importing everything on the card (100~ images) and just one photo. Now I'm getting the following message:
The following files were not imported because they could not be read. (1)
I've restarted my computer, tried running only LIghtroom, etc.
will LR 5 read files from a Panasonic fz200?
View 1 Replies View RelatedI have Lighroom 3, can I buy Lightroom 5 upgrade? Does Lighroom 5 ready Nikon D600 NEF files?
View 2 Replies View RelatedWhen trying to import files to Lightroom 4 from my camera or a file folder, there is an error message that reads "files could not be read". This just started a week ago and I'm not sure what changed to cause the problem. I use a Canon 7D and I shoot in RAW.
View 10 Replies View Related